Professional Documents
Culture Documents
The Body Wrap (24 lb) goes around a 2.81” long BT-5 tube.
The Fins are triple ply - The 110 lb. cardstock print folds at the dotted
line (score and fold) then glues over cereal box cardboard. Use a glue
stick. This fold line is the rounded leading edge of the fin. NICHT
STOMPEN
When dry, cut through all three layers on the outside of the smaller fin MITT
GRABBEN
side marked “Root Edge”. The right (back) side is larger to insure color
coverage when cut out.
The plastic “Quark” nose cone is closest to scale, fill it 2/3 full with clay
weight.
Give the finished model a good clear coat. Printer ink can run if it gets
wet! MOTORVERKENS MOTORVERKENS
Fo Fo
Lin ld Lin ld
e e
Root Edge
Root Edge
MITT NICHT
GRABBEN STOMPEN
NICHT
Fo STOMPEN
Lin ld
MITT
GRABBEN
1.25” Launch Lug Wrap
e
1.25” Launch Lug Wrap
Glue at wrap seam
MOTORVERKENS MOTORVERKENS
Fo Fo Fo
Lin ld Lin ld Lin ld
e e e
Root Edge
Root Edge
Root Edge
One Inch