Professional Documents
Culture Documents
Roll No:
37. _______ is the strength with which the material opposes rupture [ b ]
[a] hardness [b] toughness [c] stiffness [d] none of the above
38. ____ is the property by virtue of which material may be rolled in thin sheets without
rupture. [ d ]
[a] ductility [b] elasticity [c] plasticity [d] malleability
39. The _________ properties of materials under applied force (or) loads are called
mechanical properties [ b ]
[a] macroscopic [b] microscopic [c] both a and b [d] none of the above
40. The combined effect of external forces acting on a body is called ___ [ b ]
[a] point load [b] load [c] UDL [d] UVL
41. ____ Strength is the high resistance of material to fracture under suddenly applied loads.
[ a ]
[a] impact [b] tensile [c] compressive [d] shear
42. The load which falls from a height or strike the body with certain momentum is called
____ [ d ]
[a] point load [b] UVL [c] UDL [d] impact load
43. When the load is applied all of sudden and not step wise is called as ____ applied load.
[ b ]
[a] gradually [b] suddenly [c] unexpectedly [d] all of the above
44. A body is said to be acted upon by a gradually applied load if the load increases from
zero and it reaches its final value stepwise is called ____ applied load. [ a ]
[a] gradually [b] suddenly [c] unexpectedly [d] all of the above
45. What is the unit of impact energy [ a ]
[a] KJ [b] Kg [c] KN [d] Km
46. The springs are __ members and extensively used to absorb shocks. [ c ]
[a] elastic [b] resilient [c] both a and b [d] structural
47. Coiling the wire in the form of helix forms the ___ spring. [ c ]
[a] torsion [b] leaf [c] helical [d] laminated
48. There is always limiting value of a load up to which the strain totally on the removal of
the load, the stress corresponding to this load is called ____ limit [ d ]
[a] plastic [b] endurance [c] yield [d] elastic
49. 1/K = 1/K1 + 1/K2 is the total stiffness when the springs are in __ [ b ]
[a] parallel [b] series [c] horizontal [d] vertical
50. K = K1 + K2 is the total stiffness when the springs are in __ [ c ]
[a] horizontal [b] parallel [c] series [d] vertical
51. U = ½ x W x δ is the __ energy stored in the springs [ a ]
[a] strain [b] impact [c] both a and b [d] elastic
52. The total strain energy stored in a body is known as ___ [ a ]
[a] resilience [b] impact strength [c] both a and b [d] none of the above
53. The resistance of a material to elastic deformation is called ____ [ d ]
[a] hardness [b] stress [c] toughness [d] stiffness
54. If deformation decreases stiffness _____ [ a ]
[a] increases [b] decreases [c] becomes zero [d] can’t say
55. Units of stiffness [ b ]
2 2
[a] Kg/mm [b] Kg/mm [c] Kg-mm [d] Kg-mm