This document contains parameters for handover in a cellular network. It lists 11 handover parameters, the Ericsson constant associated with each, their default value ranges, and brief descriptions. All parameters appear to be configurable only by Ericsson personnel.
This document contains parameters for handover in a cellular network. It lists 11 handover parameters, the Ericsson constant associated with each, their default value ranges, and brief descriptions. All parameters appear to be configurable only by Ericsson personnel.
This document contains parameters for handover in a cellular network. It lists 11 handover parameters, the Ericsson constant associated with each, their default value ranges, and brief descriptions. All parameters appear to be configurable only by Ericsson personnel.
Handover timeRelocprep YES Handover timeRelocoverall YES Handover timeRelocsup YES Handover tCellChange YES Handover initialCellListDelay YES Handover comprModeRetryInterv YES Handover maxSohoListSubset YES Handover tsHoInIratHo YES Handover tmStopIfMeas YES Handover batonHoSupport YES Default_v Range alue 0 to 50 10 1 to 120 10 1 to 30 5 1 to 60 15 1 to 30 20 0 to 60 0 0 to 50 5 1 to 32 32 1 to 10 2 0 to 60 20 0 Parameter_Description Maximum time in buffer for a buffered report. This attribute may only be changed by Ericsson personnel. Value mapping:0 Maximum time for resource allocation in the target system. This attribute may only be changed by Ericsson personnel. Un Maximum time to complete a handover.This attribute may only be changed by Ericsson personnel. Unit: sChange takes eff Maximum time for relocation in the target RNC. This attribute may only be changed by Ericsson personnel. Unit: sChange t Time for supervising the "move" from UTRAN to GSM.Once the cell change order from UTRAN has been sent, the system e When the connection is set up for the first time, Measurement handler function will wait this predetermined time before Time interval between trials to initiate compressed mode. This attribute may only be changed by Ericsson personnel. Spec Maximum number of intra-frequency cells that the UE shall measure on. This attribute may only be changed by Ericsson p Maximum time during which soft or softer handover may be triggered during IRAT-HO execution.This attribute may only b Time for Supervision for measurements started due to Inter-frequency Load based handover.Unit: SecondsChange takes e Controls whether Baton Handover is supported for Intra-RNC Hard Handover.This attribute may only be changed by Ericss effect: New connections only be changed by Ericsson personnel. Unit: sChange takes effect: Ongoing connections