Professional Documents
Culture Documents
CSWP - CSWA - Practice Exam Questions 2012 PDF
CSWP - CSWA - Practice Exam Questions 2012 PDF
Contents
CSWA Basic Part Sample ............................................................. 2
CSWA – CSWP Advanced Part Model ......................................... 4
CSWA Assembly Model ............................................................... 6
CSWP Assembly Model ............................................................... 9
COSMOSXpress Sample ............................................................ 18
Answers .................................................................................... 21
CSWA Basic Part Sample
Question: 1
Units: Inches
Decimal places: 2
Origin: Arbitrary location
A. 2.28
B. 5.66
C. 1.34
D. 7.21
CSWA – CSWP Advanced Part Model
Sample
Question: 1
Units: Inches
Decimal places: 2
Origin: Arbitrary location
Some dimensions for the part can be found in the views that are not modeled.
All holes through all
Material: Plain carbon steel
Density: 0.28 pounds per cubic inch
A. 10.46
B. 15.43
C. 22.34
D. 13.76
CSWA Assembly Model
Sample
Question: 1
Build this assembly in SolidWorks.
It has 4 pivots (dark gray), 2 posts (red), 1 rivet (orange) and 2 swivels (light gray). Mate the
assembly as shown in the image.
Where is the center of mass if the assembly origin is in the center of the lower red cube, the
assembly planes are all parallel to the lower red cube part planes and all of the parts are made
of material with the same density?
(Coordinates given as X, Y, Z)
Sample
Question: 1
Then create an assembly using this part as the first, fixed component with identical assembly
origin location.