Professional Documents
Culture Documents
1-2019
160
140
120
100
A [Note (1)]
B [Note (2)]
80
Minimum Design Metal Temperature, ºF
60
C [Note (3)]
40
D [Note (4)]
20
-20
-40
-55
-60
Impact testing required
-80
0.394 1 2 3 4 5 6
GENERAL NOTES:
(a) Tabular values for this figure are provided in Table UCS-66.
(b) See UCS-66(a).
(c) For bolting and nuts, the following impact test exemption temperatures shall apply:
Bolting
Spec. No. Grade Diameter, in. (mm) Impact Test Exemption Temperature, °F (°C)
SA-193 B5 Up to 4 (100), incl. −20 (−30)
SA-193 B7 Up to 21/2 in. (64), incl. −55 (−48)
SA-193 … Over 21/2 (64) to 7 (175), incl. −40 (−40)
SA-193 B7M Up to 21/2 (64), incl. −55 (−48)
182