Professional Documents
Culture Documents
Pantalla anterior
Bienvenido: r080jc18
Producto: MOTOR GRADER
Modelo: 24M MOTOR GRADER B9K00466
Configuración: 24M Motor Grader B9K00001-UP (MACHINE) POWERED BY
C18 Engine
i06739756
Motor Grader
24H (S/N: 7KK1-UP)
24M (S/N: B931-UP; B9K1-UP)
Introduction
CaterpillarTM is aware of the following problem and a permanent solution has been identified.
If the following problem occurs during field repairs, use the solution identified in this Technical Information
Bulletin.
Problem
Due to the tolerances for moldboard rail maximum thickness and moldboard wear strip minimum opening,
the following condition may occur:
The moldboard wear strips on the listed 24M Motor Graders may be difficult or impossible to install due to
interference with the moldboard rails.
Solution
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 1/2
21/3/2019 24M Motor Grader B9K00001-UP (MACHINE) POWERED BY C18 Engine(SEBP4105 - 104) - Sistemas y componentes
Illustration 1 g06102217
1. If a moldboard wear strip (A) does not fit over the moldboard rail (B), begin by replacing with a new
wear strip.
Illustration 2 g06102224
2. If the moldboard wear strip (A) does not fit after replacing with new, modify the wear strip to improve
fit.
Remove 2 to 3 mm (0.08 to 0.12 inch) (C) of material from the inside surface of the short leg of the
wear strip. Maintain a smooth radius at the inside corner of the modified leg.
Copyright 1993 - 2019 Caterpillar Inc. Thu Mar 21 2019 18:21:49 GMT-0500 (hora estándar de Perú)
Todos los derechos reservados.
r080jc18
Red privada para licenciados del SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 2/2