Professional Documents
Culture Documents
BREATHER
FILTERS
30
Metal breather filter
Series TA 46
Ordering information
2 - Filter element
03 3 µm
10 10 µm
MP Filtri reserves the right to make changes to the information described herein at any time it
deems fit in relation to technical or commercial requirements. Copyright. All rights reserved.
Flow rate with Δp: 0.30 psi
Filtration cfm
3 µm 6
10 µm 7
Weight
TA 46: 0.24 lbs
1
2
Dimensions
3
Threaded connection
Ø 1.83”
1.6”
TA46 G - N (Materials)
1 - Cover: Chrome plated steel
2 - Breather filter: Resin impregnated cellulose
Polyurethane or Stainless steel
0.5”
Series TA 80
TA80G......P01 Ordering information
With filter
1 2 3 4 5
Breather filter
TA80
Example: TA80 G 03 A 1 P01
N 3/4” NPT
2 - Filter element
03 3 µm
TA80G03.9P01
With anti-slash feature 10 10 µm
3 - Seal
0 Without
0 Without
TA80
Flow rate with Δp: 0.30 psi
Filtration cfm
3 µm 16 1
10 µm 19
2
Weight
TA 80: 0.77 lbs 3
Dimensions 5
Threaded connection
Ø 3.15”
TA80 G (Materials)
1 - Cover: Chrome plated steel
2 - Breather filter: Resin impregnated cellulose
Polyurethane
2.18”
Series TAP 90
Ordering information TAP 90 G
With filter
Air breathers 1 2 3 4 5 6
1
TAP90
Example: TAP90 G 03 0 1 L P01
2
1 - Connection to reservoir 4 - Valves
G M52x2 0 Without
3
H G 1 1/2” 1 4.5 psi pressurization valve
N 1”NPT
1 - Cover/ringnut: Nylon
0 Standard
2 - Breather filter: Resin impregnated cellulose or
Q G 3/4” A With Dipstick Polyurethane
2 - Filter element 3 - Seal: NBR
L With Padlock Hasp
03 3 µm
F With Dipstick and Padlock Hasp Flow rate with Δp: 0.30 psi
10 10 µm
6 - Options Filtration cfm
3 - Seal
3 µm 16
P01 MP Standard
0 Without 10 µm 19
A NBR
Weight
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit TAP 90: 0.29 lbs
in relation to technical or commercial requirements. Copyright. All rights reserved.
TAP G
With Pressurization
Dimensions
TAP 90 for connection on weld flange
Ø 3.6”
2.5”
TAP G
With Dipstick
1.7”
0.2”
A
0.47”
A B
0.08” X 15°
B
G M52x2 Ø 2.07”
A
0.33”
H G 1 1/2” Ø 1.91”
0.6”
1”
L G 1 1/4” Ø 1.65”
M 3/4” NPT -
N 1” NPT -
Q G 3/4” -
33
Nylon breather caps
SAP
Series
054 - 075
SAP 054 - 075
Ordering information
1 2 3 4 5
Breather caps
SAP
Example: SAP 075 G4 L10 A P01
1 3
1
Filter element
Example: A7 L10
3
1 - Size 3 - Filter element
Filter Filter element
L03 Resin impregnated cellulose 3 µm
054 A4
2 L10 Resin impregnated cellulose 10 µm
075 A7
4 - Seal
2 - Connection to reservoir
SAP 054 - 075 (Materials) A NBR
SAP 054 SAP 075
1 - Cover: Nylon
G 3/8” G 1/2” 5 - Opzioni
G1
2 - Connection: Nylon
G2 G1/2” G 3/4” P01 MP Filtri
3 - Filter element: Resin impregnated cellulose
G3 - -
Flow rate with Δp: 0.30 psi 1/2” NPT
G4 1/2” NPT
Filtration cfm
G5 - 3/4” NPT
SAP 054
3 µm 7
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
10 µm 9 in relation to technical or commercial requirements. Copyright. All rights reserved.
SAP 075
3 µm 12
10 µm 14
Weights
SAP 054: 0.13 lbs
SAP 075: 0.33 lbs
Connection to reservoir “ A ”
Dimensions
Type SAP G1 G2 G3 G4 G5
Dimensions
H2
054 G1 22
H3
075 G1
075 G2 32
A 2.95” 0.67” 2.52” 0.35”
075 G4 27
Ø D1 075 G5 32
34
Nylon breather caps
Series
SAP
1
115
2
3
Ordering information
4 1 2 3 4 5 6 7
Breather caps
SAP115
Example: SAP115 2 A A03 A 1 B P01
4 - Seals
A NBR
V FPM
Clogging indicator
Set pressure: - 0.9 psi ± 10 % MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
Manual reset
Dimensions
L10 77 99
G 1”
Visual A03 65 99
0.87”
Indicator
L10 82 106
G 1 1/2”
A03 70 106
6.73”
Weight
4..17”
0.71”
1 Thoroughly clean the filler cap and 3 Replace the filter element and replace
adjacent par ts before disassembly the cover and a hand a tighten
(DO NOT OVER TIGHTEN).
2 Unscrew and lift of f the cover.
3a
3d
3b
3c
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
36
Series SA
SA Ordering information
Breather series 1 2 3 4 5
SA
Example: SA 075 G4 L10 A P01
1 3
Filter element
Example: A7 L10
1 075 A7
4 - Seal
115 A8 A NBR
2
145 A10 5 - Options
3
185 A11 P01 MP Standard
4
5 2 - Connection to reservoir
6 Type G1 G2 G3 G4 G5 G6
036 G 1/4” G 3/8” G 1/2” 1/4” NPT 3/8” NPT 1/2” NPT
7
053 G 1/4” G 3/8” - 1/4” NPT 3/8” NPT -
036 G 1/4” G 3/8” G 1/2” 1/4” NPT 3/8” NPT 1/2” NPT 0.18
Dimensions 053
075
G 1/4” G 3/8”
G 1/2” G 3/4”
-
-
1/4” NPT 3/8” NPT
1/2” NPT 3/4” NPT
-
-
0.33
0.55
115 G 1” - - 1” NPT - - 0.88
145 G 1 1/2” - - 1 1/2” NPT - - 1.30
185 G 2 1/2” - - 2 1/2” NPT - - 2.69
Dimension
H2
P10 20
SCS 050 A03 18
A10 19
P10 20
SCS 070 A03 18
A10 19
SCS XXX C SCS XXX F
P10 50
SCS 100 A03 46
A10 47
Dimensions
Weight
Type D1 H1 H2 H3 (lbs)
H1
Ø D2 Ø D2
Gasket Ø 42x32x2 Gasket Ø 42x32x2
Ø D3 (60Sh) (60Sh)
(for SCS 100) (for SCS 100)
Ø 0.24”
Riser with
Filter 2 3 4 5 6 7
element
SCS
Example: SCS 050 F G1 A10 A P01
Riser 2 3 4 6 7
only
SCS
Example: SCS 050 F G1 A P01
1 2 5 6 7
Filter
element
Example: CS 050 A10 A P01
050 6 - Seal
070 Riser assembly excluded
A NBR
100
V FPM
150 Riser assembly excluded
7 - Options
3 - Connection to reservoir
P01 MP Standard
C Weld riser
F Flange riser
4 - Threaded connection
G 3/4” for SCS 050/070
G1 G 1 1/4” for SCS 100/150
MP Filtri reserves the right to make changes to the information described herein at any time it deems fit
in relation to technical or commercial requirements. Copyright. All rights reserved.
37