Professional Documents
Culture Documents
Accurate, Efficient
Torque Multiplication
When accurate make-up
or break-out of stubborn
fasteners requires high torque
• Locomotives
• Power plants
• Pulp and paper mills
• Refineries
• Chemical plants
• Mining and construction
• High-efficiency planetary gear sets achieve high output torque • Off-road equipment
from low input torque • Shipyards
• Most models operator protected by anti-backlash device • Cranes.
(Nm) (Ft.lbs)
1015 750 E290PLUS
1355 1000 E291
Reaction
Bar 1625 1200 E391
Multiplier 2980 2200 E392
4340 3200 E393
2980 2200 E492
Reaction 4340 3200 E493
◀ Enerpac Reaction Bar Torque Plate 6780 5000 E494
Multiplier E393 used to manually Multiplier
torque bolts up to 4300 Nm.
10.845 8000 E495
4 www.enerpac.com
Manual Torque Multipliers
Manual Torque Multipliers Use Reaction Bar Models:
Enerpac manual torque • where space is limited E
multipliers provide efficient • where multiple reaction points Series
torque multiplication in wide are available
clearance applications and when external • when portability is desirable.
power sources are not available.
Use Reaction Plate Models:
Manual torque multipliers are used in most • above 3.200 Nm output torque
industrial, construction, and equipment • on flanges and applications where
maintenance applications. Hydraulic torque neighboring bolt or nut is available to Maximum Output Torque:
wrenches are better suited for tight
tolerance, flange and repetitious bolting
react against
• when extreme reaction forces 1015 - 10.845 Nm
applications. are generated. Torque Ratio:
3:1 - 52:1
Multiplier Output Ratio Accuracy:
◀ Selector Pawl
Models with anti-backlash
±5%
protection have directional selector
pawls. Set the pawl for clockwise
or counter-clockwise rotation.
CAUTION!
▲ Angle-of-Turn Protractor
Never use impact type air
E391, E392 and E393 models include
◀ Shearable Square Drive tools for power driving torque
an angle-of-turn protractor (scale)
Provides overload protection on E300- and to tighten fasteners using a “torque multipliers. Torque multiplier
E400-series multiplier’s power train by turn” method. Allows accurate drive train damage will occur.
shearing at 103-110% of rated capacity. measuring of a specific number of
Internal shear pin prevents tool from degrees of rotation.
falling off bolt.
Page: 6
User must verify manual torque wrench accuracy prior to use to ensure accurate final output torque.
5