Professional Documents
Culture Documents
Engine control
Engine control, specifications
Idle rpm
When the control system is defective, set the auto / manual switch to the MANUAL position.
Pull the engine control cable to set speed, and fix by lock nut.
NOTICE
After repairing, set the switch to AUTOMATIC position. Release the lock nut of control cable.
Assembly
Set the engine speed control switch to max. speed (P-mode, No-load), and adjust rod (3) to set stepping motor (4)
and engine throttle lever (2) to HIGH.
Remove the HIGH lock screw (5). Set engine throttle lever (2) to LOW.
While the knob of cable (1) in the cab is lowered, adjust pin (7) and yoke (6) to align their ends.
After assembling, turn the engine speed control switch to check operating condition.
Figure 1
Adjustment, engine throttle lever