Professional Documents
Culture Documents
DESCRIPTION
The Scully SC-47CC/CLMP Clamp and If the clamp is not properly attached to
Cable Unit is designed to drain static the tank vehicle, the system will not allow
charges built up on vehicles, railcars and product to transfer. If at any time during
other metal liquid tank containers. The the transfer process the clamp is
clamp unit is designed to be connected, disconnected, the system will send a
via two wires, to the Scully Groundhog™ signal to stop the product transfer.
grounding verification system. When the
clamp is attached to bare metal on the The clamp and cable unit is connected
tank container, the system utilizes an to a heavy duty, weatherproof junction
intrinsically safe signal to verify that a box. The junction box acts as a housing
proper static bond exists during liquid to connect the cable wires and the
transfer operations.* controller wiring. In the event of a
drive-away, the cable pulls out of the
Static grounding is used to dissipate any junction box. This maintains vapor tight
static charges which can build up as a safety and prevents damage at the
result of product flow or other movement. control monitor. Other systems without a
Some applications such as rail lines and junction box disconnect and may allow
pipelines may also have stray currents non-intrinsically safe signals within the
present. In these situations the rail or liquid transfer environment during a
pipeline must be bonded to ground drive-away accident..
independently from the Scully system.
Local codes should be consulted
regarding wire gauges and number of
conductors.
*WARNING
When used in conjunction with a Scully could give a permissive indication
Groundhog, the clamp provides a through this alternate path, which may
resistance (non self-proving) verification not include the vehicle. To ensure self
system. Thus, attaching the clamp to a proving operation, the vehicle must be
metallic object or to a vehicle, which equipped with a Groundbolt or Ground-
already has a return path to ground, ball.
67206 Rev D
Scully Signal Company 70 Industrial Way, Wilmington, MA 01887, USA • 800-272-8559 • sales@scully.com • www.scully.com
For use with Sculcon Junction Box, Model SC-47CC/CLMP
7.87"
Mounting Centers for All Dimensions in Inches
(200.0 mm)
#8 (4 mm) Hex Socket (mm in parenthesis) 4
Head Screws (4 Places)
7.33"
(186.2 mm)
3
2
1
3.88
(98.5
mm)
3.94"
(100.0 mm)
10 9
7.50"
2.58" (190.5 mm)
(65.5 mm)
TECHNICAL SPECIFICATIONS
Junction Box: Weather-sealed die-cast aluminum Cable: Oil resistant, Philaprene 2-Jacketed
box. Stainless steel external Coiled: 32' (extended) (10 meter)
hardware. Straight: 20' (6 meter)
Clamp: Aluminum alloy, corrosion resistant. Cable Strain Relief: Stainless Steel
Stainless steel contact points. Clamp Strain Relief: Stainless Steel
ORDERING INFORMATION
Description Part Number
SC-47CC/CLMP Clamp and 32' Coiled Cable 08815
SC-47/CLMP Sculcon Junction Box, Clamp and 20' Straight Cable 09333
REPLACEMENT PARTS
Terminal Strip, 12-position 27647
Strain Relief, 3⁄8" – for Grounding Cable 32445
Clamp and Cable Assembly, 32' Coiled Cable 31766
Clamp and Cable Assembly, 20' Straight Cable 32665
Replacement Clamp 31778
Sculcon Box Assy, General Purpose 32319
Copyright © 2013 Scully Signal Company. Dynacheck, Dynamic Self-Checking, Dynamic Self-Testing, Faylsafe, IntelliCheck, Intellitrol are registered trademarks
of Scully Signal Company. All Rights Reserved. Specifications are subject to change without notice.
67206 Rev D
October 2013