Professional Documents
Culture Documents
Transponder position
1
KMRW-1T
Fast detecting the existence of transponder
return
Reading
Writing
Write operation is possible after reading source transponder.
Select T5
Cancel
OK ERROR
2
KMRW-1T
Writing free ID code
Writing free ID code without PC - for type 11, 12, 13, 33 i 4C.
Display must be clear. To clear display ativate read function without transponder.
Accept
Attention!
For type 13 i 4C programmer checks code conformity with the rules.
3
KMRW-1T
Program KMRW for Windows®
Program KMRW enables writing free ID code. Using the program it is possible to build up detailed
transponder data base. It is very simple in use. KMRW-1 connects to a PC using serial interface RS232.
Program functions:
● identify and read - read transponder: identify type and ID code;
● read type - read selected type transponder;
● read result – read result from programmer: last type and ID code;
● write - write code to transponder PCF/T5/TEXAS - code and transponder type may be insert manualy;
● add to list – add transponder parameters to data base list;
● insert – insert transponder parameters from data base list to main window;
● change – change data base record.
4
KMRW-1T
Function PCF7930/31.
Write
Byte/Block - Write string of bytes: block number (0-7) , bytes (0-F) – hex.:
ATTENTION!
Be careful while writing blocks 0 and 1. These blocks store information for access control.
5
KMRW-1T
Program format and block + read – write format , block (string of bytes) and read data from transponder.
Read
Using right mouse button it’s possible to store block in field write->byte/block.
6
KMRW-1T
Transponder list
20 SILCA T5 YES
PHILIPS CRYPTO2
46 YES
PCF7936
PHILIPS PCF7930/31
73 YES YES PCF7930/31
MULTIPLY BLOCK
KEYLINE®