Professional Documents
Culture Documents
DESCRIPTION
< 0.35 W/C RATIO
FAIRFLO is supplied as brown liquid based on
< 53 GRADE CEMENT
sulphonated Nepthalene condensates. The powerful
< WASHED CLEAN GRADED AGGREGATES. MSA
dispersing action of the superplasticiser can be used in
20MM
many ways to obtain dense, high strength durable concrete
< SAND ZONE II
(M35, M40 and M45). The high water reduction properties
can make FAIRFLO ideal application in precast concrete
NOTES : CUBE MOULDS COMPACTED AT REDUCED
where high early strength is of paramount importance.
SLUMP. SUBMERGED CURING @ (AT 27± 2ºC)
FAIRFLO is chloride free.
PERFORMANCE TEST
Increased Workability : FAIRFLO when incorporated in
concrete mixes increases the workability without additional
water than the designed value ; thus leading to easy
placement and finishing without the risk of segregation and WORKABILITY IMPROVEMENT
bleeding.
Slump value (mm)
100
early and ultimate (28 days) strength. Such high early 80
CONCRETE
60 Mix I
strength and early removal of forms lead to increased 40
productivity of precast concrete and the production of high 20
strength concrete without increasing cement content.
0 min. Slump Time
TM
FAIRFLO
STRENGTH IMPROVEMENT SHELF LIFE & STORAGE
FAIRFLO will have a shelf life of 24 months in unopened
Mix II
Compressive Strength
Mix I
350 Mix II containers when kept in dry conditions at a temperature
300
between 5ºC to 45ºC. Storage at higher temperature or high
Mix I
(kg/cm²)
250
200 humidity may reduce shelf life.
Mix II
Mix I
150
100
50 SPECIFICATION
3 days 7 days 28 days
FAIRFLO is normal super plasticiser for concrete used at a
Days dosage of about 0.6%-1.5% by weight of cementitious
material, strictly in accordance with the instruction of
FAIRMATE.
HEALTH & SAFETY
FAIRFLO is non toxic. However, splashes on the skin QUALITY ASSURANCE
should be washed well with water and if contact with eye Fairmate manufactures entire range of construction
occurs, wash well with water and seek medical advise, chemicals under compliance of ISO 9001-2000, ISO (EMS)
vigorous stirring is required if containers containing 14001 & OHSAS 18001 (Occupational Health and Safety)
admixture is allowed in stationary condition for more than certified by ISOQAR / UK.
week or so.
TECHNICAL SERVICES
DOSAGE & PACKING Mix Design : Fairmate has a dedicated advisory service on
The normal dosage is about 0.6%-1.5% by weight of Concrete Mix Design and can be contacted if assistance is
cementitious material. However, the optimum dosage is to required.
be determined by site trials. While new advances and changes will take place but one
1, 5, 20, 50, 200 kg. carboys. thing will never change is quality and meeting special needs
of our customers. Our laboratory in Baroda and technical
personnel & experts are available to provide additional
information and technical assistance. We are eager to work
with you in development of new product and resolve your
problem.
INDIA DUBAI NEPAL GHANA LEBANON SAUDI ARABIA KENYA NIGERIA USA VENEZUELA MALAYSIA
FM/09/08/H