Professional Documents
Culture Documents
Author: GoNuTZ (---.va.mediaone.net)
Date: 12-19-01 03:55
Now heres the steps on how to convert if you should run into any
problems
Note!
To convert from DivX videos you have to install a DivX Codec
To convert from QuickTime MOV videos you must download the
QTReader.vfp, copy it to the TMPGEnc folder.
To convert from MPEG2 videos you might need the mpeg2 plugin,
extract and copy to the TMPGEnc folder. Or get a MPEG2 Codec and
you can open and play MPEG2 with most applications..
Launch TMPGEnc.
2. Hit the button Load at the bottom right and open the correct
Template that you find in the TMPGEnc folder under Templates,
open
VideoCD(PAL) if the original source in 25 fps or
VideoCD(NTSC) if the source in 29,97/30fps or
VideoCD(NTSCFilm) if the source is 23,97fps.
To check what the FPS (frames per second) is open the the
AVI/DiVX with Windows Media Encoder and select View->Statistics.
If the video is some strange fps as 20fps / 60fps or something
try with either PAL or NTSCFilm and see what looks best.
Settings
Under Video you can select quality, Use High Quality. (if it is
DivX, ASF to MPG you can use Low or Normal Quality).
Second get a burning program I use Nero so i will give you the
steps for useing nero.
Launch Nero.Close the Wizard. Select File->New.
1. Select VideoCD
2. Select PAL or NTSC depending what format your source MPEG is
in.
And hit New.
1. Locate your .mpg and drag it(see picture below). Remeber that
you can add several .mpgs also, each mpg will be a own track on
the VCD and you can add data files also, just drag them to any
folder.
Note!!! If Nero complains you have encoded the VCD MPG file to
wrong format, you can then either let Nero encode to correct
format or check our VCD Convert guides so you have encode
correct or repair the MPG.
1. Select Write speed, lower may work better if you get problem
playing the VCD. Select Track at once or Disc at once(it does
not matter) and Finalize CD.
2. Hit Write.