Professional Documents
Culture Documents
Availability
Alloy Steels HY80 is stocked by 4 North American distributors and produced by 4 large mills.
Distributors will offer small quantity buys while mills will generally only sell large quantities, with
delivery times anywhere from 10 to 50 weeks depending on size and form required
This material is stocked primarily in Bar Products by 3 distributors but is also available to a lesser
extent in Flat Rolled Products.
Specifications
The following specifications cover Alloy Steels HY80
Property Results
Chemistry Data : [top]
Principal Design HY‐80 is a high yield strength (minimum of 80 ksi) , low carbon,
Features low alloy steel with nickel, molybdenum and chromium. It has
http://www.suppliersonline.com/propertypages/HY80.asp 1/3
6/2/2017 HY80 Alloy Steels Material Property Data Sheet Product availability and request a quote
Applications This alloy is best known for use in shipbuilding for welded hull
plates and structural use.
Forging Because the alloy is supplied in the heat treated and tempered
condition it should not be subsequently reheated for forging.
Hot Working Hot working, if necessary, may be done in the range of 600 to
200 F.
Cold Working HY‐80 has very good ductility and is readily cold worked by
conventional means. Bend radii of 2t for material up to one inch
thick and 3t for material thickness' of one to two inches thick
are recommended.
Annealing A stress relief anneal may be done at 1200 F for 1 hour per inch
of thickness, followed by furnace cooling at a rate not in excess
of 200 F per hour down to 500 F. From there it can be air
cooled.
http://www.suppliersonline.com/propertypages/HY80.asp 2/3
6/2/2017 HY80 Alloy Steels Material Property Data Sheet Product availability and request a quote
Other Mechanical HY‐80 is noted for notch toughness. Charpy V‐notch values are
Props 50 ft lb. for material 1/2" to 1‐1/2" thick and 30 ft lb. for over
1‐1/2" thick.
Videos :
Disclaimer
This information is provided "as is" and Metal Suppliers Online, Inc. makes no warranty of any kind
with respect to the subject matter or accuracy of the information contained herein. Metal Suppliers
Online, Inc. specifically disclaims all warranties, expressed, implied or otherwise, including without
limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall Metal Suppliers Online, Inc. be liable for any special, incidental, indirect or
consequential damages of any kind or any damages whatsoever resulting from loss of use, data,
profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out
of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be
periodically made to the information herein.
Use of this Web Site constitutes acceptance of the Metal Suppliers Online User Agreement.
Copyright © 1995‐2017 Metal Suppliers Online, LLC. All Rights Reserved.
Metal Suppliers Online Privacy Policy | Contact Us
http://www.suppliersonline.com/propertypages/HY80.asp 3/3