Professional Documents
Culture Documents
NON-FACE-TO-FACE MODE
SEMESTER MAR-JUL 2020
INTRODUCTION:
A sound level meter (SLM) is a measuring instrument used to assess noise or sound levels
by measuring sound pressure. Often referred to as a sound pressure level (SPL) meter, decibel
(dB) meter, noise meter or noise dosimeter, a sound level meter uses a microphone to capture
sound. The sound is then evaluated within the sound level meter and acoustic measurement
values are shown on the display of the sound level meter. The most common unit of acoustic
measurement for sound is the decibel (dB); however, some sound level meter devices also
determine the equivalent continuous sound level (Leq) and other acoustic parameters.
With a portable sound level meter, industrial hygiene and workplace safety professionals
can measure sound levels in multiple locations to ensure environmental conditions fall within
recommended exposure limits (RELs). Some sound level meter devices can be permanently
installed for continuous monitoring of sound levels at a work or job site.
OBJECTIVES:
1. To conduct a hypothetical (theoretical) lab work involving a portable Sound Level Meter (SLM).
2. To study all the components and functions of the complete system of the SLM.
3. To be able to use the portable SLM to measure noise levels in the workplace.
4. To be able to analyse and draw conclusions from the use of SLM in the work site.
IMAGES OF SOME SLM:
PROCEDURE:
1. Search at least 5 references for data and information from the internet regarding the usage and
application of the SLM.
2. Your references should have ample data on noise level data collected by using an SLM at specific
locations in the work place.
3. These data will be your main reference for your lab report.
1. The finalised complete version of the report for submission should be uploaded into TURNITIN.
2. You may get the CLASS ID and PASSWORD from the lecturer.
3. The lab report should have a similarity index of less than 30% for acceptance to marking
assessment. If it is more than 30%, it will be rejected and you will have to redo the lab report.
USE THIS LAB REPORT ASSESSMENT FORM FOR THE COVER PAGE OF YOUR LAB REPORT:
FACULTY OF MECHANICAL ENGINEERING
UNIVERSITI TEKNOLOGI MARA
Guidelines:
Level Poor Fair Satisfactory Good Excellent
Scale 0-2 3-4 5-6 7-8 9-10
Introduction, Content 5
Discussion, Conclusion 2
Format, Reference 1
Total 10 / 100%
Name of Lecturer:
Assessed by:
Signature:
Date: