Professional Documents
Culture Documents
TENDER DOCUMENT
FOR
VOLUME – III
Name of work - Tender for Construction of 100 Bedded Hospital for ESIC at Bhilai
TO BE QUOTED BY TENDERER
ESTIMATED
SI. No. Name of work COST (Rs.)
Without Taxes AMOUNT IN Rs. AFTER ADDING %
% (-) BELOW/ AT PAR/(+) ABOVE
(-) BELOW / AT PAR / (+) ABOVE
1 2 3 4 5 = (4 x 3)
Total
Note:
Rates to be quoted in this tender all inclusive with all taxes and duties etc. including GST.
(In Figures)______________________________________________________________________________________________________________________________
(In Words)_______________________________________________________________________________________________________________________________
SUMMARY
1 CIVIL ⁼ 420292880.49
2 HVAC ⁼ 30243129.00
3 MEP ⁼ 6860014.00
4 FURNITURE ⁼ 11818620.00
8 LAUNDRY ⁼ 3079155.00
10 SIGNAGE ⁼ 3654353.00
12 ELECTRICAL ⁼ 79098580.87
14 PLUMBING 28302872.62
15 LFT = 12800000.00
SAY = 672505366
EARTH WORKS
CONCRETE WORKS
FORM WORK
Centering and shuttering including strutting,
5.9
propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for
14 5.9.1 2422.08 sqm 193.45 468551.44
mass concrete
25 5.40.1 All works upto plinth level 3907.14 cum 6691.85 26145992.14
26 5.40.2 All works above plinth level upto floor V level 7122.40 cum 7495.40 53385215.59
BRICK WORK
STEEL WORK
10.14.1 Profile B
Fixing with adjustable lugs with split end tail to
61 10.14.1.1 2683.30 metre 340.35 913261.16
each jamb
FLOORING WORK
66 11.20.4 Ordinary cement without any pigment 1051.00 sqm 661.35 695075.54
11.20.4 Ordinary cement without any pigment 170.31 sqm 661.35 112636.50
ROOFING WORK
FINISHING WORK
13.61.1 Two or more coats on new work 633.09 sqm 78.40 49634.21
ALUMINIUM WORK
WATER PROOFING
For Terrace
Providing and laying water proofing treatment on
roofs of slabs by applying cement slurry mixed
with water proofing cement compound
consisting of applying:
(a) after surface preparation, first layer of slurry
22.6 of cement @ 0.488 kg/sqm mixed with water
proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when
the first layer is still green. Overlaps of joints of
fibre cloth should not be less than 10 cm.
ROAD WORKS
HORTICULTURE WORK
Supplying and stacking at site dump manure
from approved source, including carriage upto 5
2.4
km complete (manure measured in stacks will
be reduced by 8% for payment) :
Screened through sieve of I.S. designation 20
24 2567.72 cum 170.70 438309.68
2.4.1 mm
MISS. WORK
ROLLER BLINDS
Providing and fixing Roller Blinds with roller
tube, bottom bar leveller made of extruded
aluminium alloy an Idler, Insert Type- Brackets,
103 NSR
powder coated PVC chain etc. all complete at all
floor and heights as per approved manufacturer
specification .
a 150 mm dia propeller fan, with single phase motor 7 No. 2,995.00 20,965.00
b 300 mm dia propeller fan, with single phase motor 9 No. 3,321.00 29,889.00
c 450 mm dia propeller fan , with single phase motor 1 No. 3,975.00 3,975.00
a 100 to 300 CFM, 5-7 mm SP WG with Single phase motor 6 No. 6,580.00 39,480.00
b 400 to 500 CFM, 7-10 mm SP WG with Single phase motor 11 No. 6,580.00 72,380.00
c 600 CFM, 10-12 mm SP WG with Single phase motor 6 No. 8,168.00 49,008.00
d 700 to 800 CFM, 10-12 mm SP WG with Single phase motor 40 No. 9,257.00 370,280.00
e 900 CFM, 12-15 mm SP WG with Single phase motor 8 No. 12,315.00 98,520.00
f 1000 CFM, 12-15 mm SP WG with Single phase motor 1 No. 15,019.00 15,019.00
a Supply, install, test and commission snap acting humidistat . 3 No. 13,122.00 39,366.00
1000 Ltr . Open Expansion Tank duly insulated and with all
a 1 No. 40,896.00 40,896.00
accessories.
Note: The pipes of sizes 150mm & below shall be M.S. 'C'
class as per IS:1239 and Pipes size above 150 mm shall be
welded black steel pipe heavy class as per IS: 3589, from
min. 6.35 mm thick M.S. sheet for pipes up to 350 mm dia.
And from min. 7 mm thick MS sheet for Pipes of 400 mm
dia. and above.
Insulation specification and finishing material remains same
for the valves and drain pipes as per specifications.
Note: The pipes of sizes 150mm & below shall be M.S. 'C'
class as per IS:1239 and Pipes size above 150 mm shall be
welded black steel pipe heavy class as per IS: 3589, from
min. 6.35 mm thick M.S. sheet for pipes up to 350 mm dia.
And from min. 7 mm thick MS sheet for Pipes of 400 mm
dia. and above.
2.14 Y- STRAINERS
Providing and fixing in position the following Insulated
Y-Strainers of ductile CI body flanged ends with SS stariner for
chilled/hot water circulation as per the specifications.
a Auto air vent with isolating ball valves (15 mm dia) 60 No. 1,440.00 86,400.00
4.4 Grilles/Diffusers
Providing and fixing of Extruded aluminium supply and return
air grilles/diffusers/louvres with dampers, supply air plenum
etc. duly powder coated as per specifications and drawings.
a 16.15 Aluminium supply air grilles with damper. 16 Sqm. 7,132.00 114,112.00
b 16.16 Aluminium return air grilles without damper. 16 Sqm. 4,065.00 65,040.00
c 16.17 Aluminium supply air square diffuser with damper 6 Sqm. 8,686.00 52,116.00
Aluminium return/exhaust air square diffuser without
d 16.18 6 5,619.00 33,714.00
damper. Sqm.
Aluminium return/exhaust air Valve circular/squirell diffuser
e 18 Sqm. 4,901.00 88,218.00
without damper.
f Linear air grilles (150 MM wide) 50 RM 762.00 38,100.00
g Aluminium supply air collar damper 2.0 Sqm. 3,648.00 7,296.00
h AI Volume control dampers for ducts 15 Sqm. 4,901.00 73,515.00
a 16.20.1 Bare Fire Dampers with 400 mm sleeve 5 SqM 7,103.00 35,515.00
A Wiring for light / Fan points with 1.5 sq. mm PVC insulated
copper conductor 1100 Volt grade stranded flexible FRLS
wires of approved make in 1.6 mm thick 25 mm dia MS
conduit including cost of providing & fixing saddles, hangers,
supports, cutting chases and filling chases for recessed
conduiting, and including the cost of providing and fixing a 6
amp 240 Volt Modular Plate type switches of approved
quality, colour, make and design with moulded cover plate
in zinc chromate passivated MS box and including the cost of
running 1.5 sq. mm PVC insulated copper earth wire for loop
earthing etc. complete
a 4.6.1 100 mm. Width x 50mm. Depth x 1.6mm. Thickness. 270 Rmt 436.00 117,720.00
b 4.6.2 150 mm. Width x 50mm. Depth x 1.6mm. Thickness. 90 Rmt 504.00 45,360.00
c 4.6.3 225 mm. Width x 50mm. Depth x 1.6mm. Thickness. 80 Rmt 604.00 48,320.00
d 4.6.4 300 mm. Width x 50mm. Depth x 1.6mm. Thickness. 50 Rmt 703.00 35,150.00
e 4.6.6 450 mm. Width x 50mm. Depth x 1.6mm. Thickness. 50 Rmt 1,024.00 51,200.00
2 S.S 316 carriage suitable for rectangular sterilizer. nos 2.00 114134.00 228268.00
3 S.S 304 trolley suitable for Above carriage. nos 2.00 98912.00 197824.00
S.S control and packing table with drawer used for
seperation and packing of various sets of stermzed
4 nos 1.00 250,000 250000.00
sets of sterilzed goods for wads, clinics,operation
theatres etc.
S.s work table with two sink.The bench top is
5 fabricated out of 16 swg S.S 304 qlty.Ground and nos 1.00 114134.00 114134.00
polished with smooth surface and edge section.
Washer disinfector . Washer disinfector,single
door,suitable for cleaning and disinfection of surgical
6 nos 1.00 1133731.00 1133731.00
instrument, suction bottles, cleaning buckets etc.
Side return Desk: table top: 25mm MFC. Metal black spacers: diameter side unit -
Nos. 2 30548.00 61096.00
+4cm, length =10.4cm Pedestal leg : 25mm MFC. 1200x600x730
Pedestal : top panel : 25mm MFC, all other panels : 18mm MFC . Lock : bookcase -
Nos. 2 28790.00 57580.00
provided. Castor : provided handle : metal. 790x400x2200
Credenza : Top panel : 25 mm MFC , door panels: 18mm MFC, all other back unit -
Nos. 2 57564.00 115128.00
panels : 18 mm MFC, Handle : metal. 1400x470x760
Wardrobe: Top panel: 25mm MFC, bottom panel : 25 mm MFC . Wood
door panels: 18 mm MFC , glass Doors: 5mm, All other panels: 18 MFC, mobile pedestal -
Nos. 2 17613.00 35226.00
Handle : metal. Joining top : top panel : 25mm MFC, leg : Metal. 400 x 560 x560
Executive Desk of size -2200W x 1190D x 750H consisting of Top:36 mm Nos. 39 29838 1163682
thk.side Panel:44 mm thk.Modesty Panel:18 mm thk. Mobile Pedestal Numero Uno Nos. 39 22113 862407
Configuration-1 pencil drawer, + 1 Box drawer + 1 filling drawer. Main table-2200 Nos. 39 67321 2625519
Table for
Dimensions: 406W x 550D x 640H, Pedestal Top Panel:25mm thk Side Table-
Category 'B'
Drawer Fronts & Carcass: 18mm thk. side Return Unit with Pedestal of 1380X480X700
1 HOD/
Dimensions:1380W x 480D x 700H Top:36 mm thk. Pedestal: 1 Pencil Back Unit-
Proffessor
drawer +3 Box drawers Top Panel-25 mm thk Drawer Fronts & Carcass 2400X420X1200 Nos. 39 13120 511680
/Associate
:18 mm thk. Back Unit / Cablnet Dimensions - 2406W x 400D x 1215H Mobile Pedestal-
side Panels:18 mm yhk PLB Shutters: 18 thk. PLB Cabiret Top Panel: 25 400X550X 460
mm thk. PLB
Manufacturing as per design and placing in position, Modular
conference Table of height 740mm, having two seater modules of size
1370x650mm , single seater module of 730x 650mm and round end
module of radius 710mm. The top of the table shall be made of
38mm (18mm plain particle board +18mm pain particle board
skirting +1mm Backing DL +0.6mm post formed natural Veneer ) of
approved quality . The legs of the table shall be 38mm thk (18mm
plain particle board +18mm pain particle board skirting + postforned
Conference Dl of 0.6mm thk). The modesty panel of the tables shall be 600mm Senate per seat
3 Nos 1 8990 8990
table high made of 18mm thk plain board confomi9ng to is 3087.Legs and (16 seater)
modesty panels shall be finished by using black Asian Paint Lipping
at edges for both tops and legs shall be made from MDF board of
approved quailty . The top , legs and modesty panel shall be joined to
each other by using eccentric wheel system . Glide screws shall be
put at bottom of legs for level adjustment of +/-7mm and a steel rib
tubular stiffner of 19mm square section of 1.2mm thk shall run
through each module to give sturdlness to the top.
Reception
5
Desk
Reception
Desk
5a Custom Made Nos. 3 95625 286875
(2500x800x1
050)
Reception
Desk
5b Custom Made Nos. 3 159375 478125
(1500x800x1
050)
UNDERSTRUCTURE ASSEMBLY : the understructure is an assembly of
tubular frames made of M.S.E.R.W. oval tubes of 3.5cm x 1.5cm. X
18BG. Thk.held together with perforated M.S. shelf + threaded nuts +
m/c screws. The ends of tubular frames are fitted with rubber studs at
Tipoy / the top and the bottom . The top studs are fitted with PVC vacuum
Centre pads for mounting and gripping the glass top. the tubular frames are
6 Tables types- black powder coated . CENTRE-PIECE TOP : The centrepiece top is CPR 2E Nos 8 4078 32624
2 (550x 550 made from 0.95cm. thick Float glass with rounded corners of size 550W
x 450) x 550 D x 425 H. SHELF: it is a fabricated assembly made by 0.5cm. thk.
perforated M.S. sheet welded to M.S. sq. pipe 1.5cm. x 1.5cm. x 14 BG
thick with 0.3cm thick HR. steel plates on each side for fixing
understructure assembly . the shelf assembly is black powder coated.
chair having width 52.0 mm, depth 54.5mm, height 80.5mm and seat
Chairs for
22 height 43.0 mm. seat & back shell is injected moulded in propylene. MPC4 Nos. 50 2950.00 147500.00
canteen
Tubular frame is in 19mm dia. Stainles steel tube.
understructure: the understructure is foldable and stackable, made
with combination of aluminium and plastic. Centre column is of
serracted aluminium extrusion of diameter 70mm, which is anodized.
Base is made in 2 pieces of die cast aluminium with buffed finish. it is
bolted together with the centre column and top flange. MDF top with
PU coating (both profiles): size 800mmx800x25mm thick made of
25mm thick MDF , painted in yellow, red, orange, wine, beige PU
Table for
coating on a sealer coat. PU coating done on both . PU coating on sealer
canteen (4 café pod -
coat. PU coating done on both top and bottom surfaces. PU coating has
23 seater) (size rubber wood Nos. 13 13505.00 175565.00
hardness of 3H. Top is fitted to the understructure with no. bx16 pholip
in mm = top
head screw rubber wood top with PU coating (both profiles) size :
900x900)
800mm x18mm thick made of 18mm thick rubber wood. top is made of
2 finishes: wenge and natural. stainless steel top size : 800mm x
800mm x 1.2 mm thick 24mm thick - top assembly top made from 1.2
mm thick SS- 304brushed steel finish sheet welded stiffner assembly
made from 0.6 mm thick SS-304 sheet glued with top with special glue.
TOTAL 23444706.00
MICROWAVE OVEN
2 MR Cap.20-30Ltrs. 1 No. 29800.00 29800.00
IFB-MAKE - SC-2
PICK UP COUNTER WITH OVERSHELF
Size 1800X600X850 + 300
Top
3 sides, under & over shelf of s.s.sheet,
on m.s.angle & s.s.tubular legs frame
work. The counter will have 3 sides fully
covered, operator side open. With one
3 MR 2 No. 90000.00 180000.00
under shelf. One over shelf 300mm wide
& running along the full length of counter
u type heating element of 1 Kw is placed
under the one head
shelf to keep the dishes warm provided
with toggle switch also connected with
4 mm 3 core wire.
POTATO PEELER
Cap.15Kg./chrgs. (CROMPTON MOTOR
1.0 HP)
16 gauge Stainless steel sheet peeling
drum, lined inside with Abrasive
25 MR 1 No. 78000.00 78000.00
material, stainless steel /cast iron
rotating peeling disc. Top of the drum will
have a potato inlet door, waste Inlet
provision peeled potato discharge door &
waste water Outlet pipe
STORAGE CABINET
Size 1200X600X850mm
Top of 16Swg S.S.Sheet one over shelf,
38 MR 2 Nos. 60000.00 120000.00
three sides of 20SWG s.s. sheet. Dish
storage cabinet with 2 shelves and sliding
door will be provided on service side.
TOTAL 5,728,750.00
TOTAL 3,079,155.00
Part C - Total
TOTAL 16,033,000.00
Name plate
Number plate 80x120 each 115 358 41170.00
Room designation 80x300 each 133 691 91903.00
Doctor's/ Occupant's name 80x300 each 37 691 25567.00
Wall mounted over Door 150x600 each 70 3621 253470.00
Nurse Station 0
Wall projected(both side) 250x210 each 6 3832 22992.00
Door mounted 120x150 each 8 755 6040.00
Radiography/MRI/CTScan etc.
Wall projected(both side) 250x210 each 4 3832 15328.00
Door mounted 120x150 each 4 755 3020.00
Waiting Lounge
Wall mounted 150x600 each 13 3621 47073.00
Others
Lifts (Elevators nos.) 400x120 each 20 2416 48320.00
Lifts Wall Projected 250x210 each 10 3832 38320.00
Stairs Wall Projected(both side) 250x210 each 19 3832 72808.00
Door mounted 120x150 each 19 755 14345.00
Drinking Water 400x120 each 10 2416 24160.00
Electric / AHU rooms 400x120 each 5 2416 12080.00
Bed number in more than 2 bedded rooms 80x120 each 174 358 62292.00
Radiography/MRI/CTScan etc.
In use (illuminated) 400x400 each 3 9726 29178.00
Incomer :-
Supplying and fixing upto 32 amps rating, 240/415
volts, “C”curve, miniature circuit breaker suitable for
inductive load of following poles in the existing MCB
3.05
DB complete with connections,testing and
commissioning etc. as required.
3.05 a) 2.10.5 Triple pole and neutral 32 amp for Light DB each 61 891 54351
b) 2.10.1 6-32 Amp (10 KA) SP MCB C' Series each 2668 173 461564
c) 2.10.3 Double pole each 27 463 12501
d) N.S.R. 40A FP MCB each 18 3008 54144
e) N.S.R. 63A FP MCB each 73 3008 219584
OT ISOLATION PANEL
Supply only of Indoor, cubical, wall mounted. With
IP 42 protection , 10 KVA ISOLATION
3.08 each 3 419750 1259250
Transformer , single phase 230 Volt air cooled
ISOLATION Panel for OT with following specs
RISING MAIN
OT ISOLATION PANEL-SPECIFICATION
1) SYSTEM 230V AC 50Hz Single Phase
2) LOCATION & TYPE Indoor, cubical, wall mounted.
3) ENCLOUSRE IP42
4) ISOLATION PANEL
a) Isolation transformer capacity 10 KVA-PIECO MAKE.
b) Ratio 0.042361
c) Primary Voltage (Volts) 230V
d) Secondary Voltage (Volts) 230V
SUBHEAD VI :- EARTHING
DETAIL OF EARTHING
(HT PANEL) CU 2
TR -N CU 4
DG -N CU 4
LIFT CU 8
OT CU 6
CSSD CU 2
CATH LAB CU 2
OTHER( UPS,SERVER,X-RAY etc) CU 20
TOTAL NOS OF COPPER EARTHING 48
8.19 SITC of XLR Connectors for paging stations Nos. 8 582.19 4657.52
9.10 22" TFT Colour Monitor as per specifications. Nos 17 8738.65 148557.05
12.04 Analog Clip Phone- Progility P100 No/s 170 1164.38 197944.6
EXTERNAL ELECTRIFICATION
(Transformer)
14.04 1000 KVA transformer with oil soak pit
Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft with
DSR-14 bricks and S.W. drain pipe 100 mm diameter, 1.8 m
CEVIL_ long complete as per standard design. With Jobs 1 18309.5 18309.5
19.32.1 common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 (The pit shall be adequate to
hold 1000 lt oil).
BUSCOUPLER
1 Nos. 1600 A FP EDO ACB 50kA Without release
BUSBAR :-
2000 Amps 4 pole 50 kA aluminum conductor (
CD 0.8A /sq.mm. ) bus bar (PVC sleeve Heat-
shrinkable busbar insulation) supported by DMC /
FRP insulato₹(MAIN BUSBAR)
OUTGOING
1-All MCCB should be Adjustable thermal magnetic
Release ,Ics=100%Icu with Rotary Handle. Fault
Level minimum 25KA
1-ON Indication Light for all Outgoings. With MCB
L.H.S.
R.H.S.
1 No.630A FP EDO ACB 50kA With Thermal
Magnetic Based Release (O/C,S/C,E/F) Protection
& S/T(for Essential panel )
2 Nos. 320Amps FP ,MCCB adjustable with rotary
handle for 130KVAR, Spare
1 Nos. 200Amps FP ,MCCB adjustable with rotary
handle Fourth Floor P.DB
1 Nos. 160Amps FP ,MCCB adjustable with rotary
handle for Third Floor P.DB
1Nos. 100Amps FP ,MCCB adjustable with rotary
handle for Spare
1 Nos. 63Amps FP ,MCCB adjustable with rotary
handle for Spare
BUSCOUPLER
1 No. 1000A FP EDO ACB 50kA With
Microprocessor Based Release without proection
OUTGOING
1 No Thermostat(30-80 degree)
1 No. Aux. Contactor 8NO+8NC (220V AC)
2 Nos. Aux. Contactor 4NO (220V AC)
2 nos Axial flow fan- 6" ( Heavy Duty)
OUTGOING
7 sets of ON -OFF push buttons station red &
green with ON/OFF indicating lights for each
i)
KVAR capacitor unit to indicate its position.(two
space only)
1 No Thermostat(30-80 degree)
1 No. Aux. Contactor 8NO+8NC (220V AC)
2 Nos. Aux. Contactor 4NO (220V AC)
2 nos Axial flow fan- 6" ( Heavy Duty)
OUTGOING
6 sets of ON -OFF push buttons station red &
green with ON/OFF indicating lights for each
i)
KVAR capacitor unit to indicate its position.(two
space only)
6 nos Ammeter suitable for each capacitor Bank
ii)
with CT
1 nos 25 amp TP 10 KA MCB for 10 KVAr
iii) 2 nos 32 amp TP 10 KA MCB for 12.5 KVAr
iv) 1 nos 40 amp TP 10 KA MCB for 20 KVAr
iv) 1 nos 63 amp TP 10 KA MCB for 25 KVAr
v) 2 nos 100 amp TP 25 KA MCCB for 50 KVAr
1 nos. Capacitor duty contactor suitable rating for
vi)
10kVAR Rating
2 nos. Capacitor duty contactor suitable rating for
vii)
12.5kVAR Rating
1 nos Capacitor duty contactor suitable rating for 20
viii)
kVAR Rating
1 nos. Capacitor duty contactor suitable rating for
ix)
25kVAR Rating
1 nos. Capacitor duty contactor suitable rating for
x)
50kVAR Rating
1 nos. 10 KVAR, 415 V, MPP supper heavy duty
xi)
type capacitor bank with 7% detuned reactor
2 nos. 12.5 KVAR, 415 V, MPP supper heavy duty
xii) type capacitor bank with 7% detuned reactor
1 nos. 20 KVAR, 415 V, MPP supper heavy duty
xiii)
type capacitor bank with 7% detuned reactor
1 nos. 25 KVAR, 415 V, MPP supper heavy duty
xiv)
type capacitor bank with 7% detuned reactor
1 nos. 50 KVAR, 415 V, MPP supper heavy duty
xv)
type capacitor bank with 7% detuned reactor
Miscellaneous items
a 4nos door switch
b 4 nos illumination lights with 6 A,10kA MCB
ILLUMINATION LED WITH HOLDER & DOOR
c
SWITCH
4 nos 6" dia exhaust fan with thermostate &
d
suitable canopy
Internal illumination in Cable alleys with Door
e Each 1 455029 455029
operated switch.
INCOMER:-
1 No 63Amps FP ,MCCB adjustable with rotary
handle
1 set Phase Indicating LED
1 No. Digital Ammeter with Suitable CT's
1 No.Digital Voltmeter
3 Nos. Control MCB
BUSBAR :-
100 Amps 4 pole aluminum conductor ( CD 0.8A
/sq.mm. ) bus bar (PVC sleeve Heat-shrinkable
busbar insulation) supported by DMC / FRP
insulato₹(MAIN BUSBAR)
OUTGOING
3 No 32Amps FP ,MCCB adjustable with rotary
handle for Lift-1, Lift-2 & Spare
3Nos 32 AMP TPN 10 ka MCB
2 nos 4 pole 300 ma RCBO each 2 177600 355200
BUSBAR :-
400 Amps 3pole & 600 Amps Neutral aluminum
conductor ( CD 0.8A /sq.mm. ) bus bar (PVC
sleeve Heat-shrinkable busbar insulation)
supported by DMC / FRP insulato₹(MAIN
BUSBAR)
OUTGOING
5 Nos. 100 Amps FP ,MCCB adjustable with rotary
handle for II-Fl UPS DB, III-Fl UPS DB, Cath LAB
DB, Dialysis DB, Spare
8 Nos 63 Amps FP ,MCCB adjustable with rotary
handle for IV-Fl UPS DB, OT-1 DB, OT-2 DB, OT-
3 DB, OT-4 DB, ICU UPS DB, NICU UPS DB,
Spare
3 Nos 40 Amps FP ,MCCB adjustable with rotary
each 1 1129772 1129772
handle for GF, 1F & spare
BUSBAR :-
200 Amps 4pole aluminum conductor ( CD 0.8A
/sq.mm. ) bus bar (PVC sleeve Heat-shrinkable
busbar insulation) supported by DMC / FRP
insulato₹(MAIN BUSBAR)
OUTGOING
2 Nos. 18KW S/D Starter with 63A TPN MCCB,
ON/OFF/TRIP Indication with ON/OFF Push button
and Ammeter
2 Nos. 7.5KW S/D Starter with 25A TPN MCCB,
ON/OFF/TRIP Indication with ON/OFF Push button
and Ammeter
6 Nos. 63A TP Contactor with (18A-24A) thermal
overload relay
6 Nos. 25A TP Contactor with (8A-12A) thermal
overload relay
2 No 63 Amps TPN ,MCCB adjustable with rotary
handle for Spare
each 1 333375 333375
OUTGOING
2 Nos. 100 Amps FP ,MCCB adjustable with rotary
handle for STEAM STERILIZER, SPARE
1 Nos 160 Amps FP ,MCCB adjustable with rotary
handle for AUTOCLAVE, SPARE
3 Nos. 32Amps FP ,MCCB adjustable with rotary
handle for 2 NO AUTOCLAVE, SPARE
1 No. 63Amps FP ,MCB adjustable with rotary
handle for SPARE
1 No. 32Amps FP ,MCB adjustable with rotary
handle for SPARE
2 Nos. 16 Amps FP ,MCB adjustable with rotary
handle for SPARE
2 Nos. 6 Amps FP ,MCB adjustable with rotary
each 1 300795 300795
handle for E.T.O. M/C-1 & 2
BUSBAR :-
300 Amps 4pole aluminum conductor ( CD 0.8A
/sq.mm. ) bus bar (PVC sleeve Heat-shrinkable
busbar insulation) supported by DMC / FRP
insulato₹(MAIN BUSBAR)
OUTGOING
BUSBAR :-
300 Amps 4pole aluminum conductor ( CD 0.8A
/sq.mm. ) bus bar (PVC sleeve Heat-shrinkable
busbar insulation) supported by DMC / FRP
insulato₹(MAIN BUSBAR)
OUTGOING
3 No. 63 Amps FP ,MCB 10kA for Histopathology
bio-chemistry + spare
2 No.32 Amps FP ,MCB 10kA for blood bank
4 No. 16 Amps FP ,MCB 10kA f
8 No. 10 Amps FP ,MCB 10kA for Physiotheraty each 1 190993 190993
BUSBAR :-
600 Amps 4pole aluminum conductor ( CD 0.8A
/sq.mm. ) bus bar (PVC sleeve Heat-shrinkable
busbar insulation) supported by DMC / FRP
insulato₹(MAIN BUSBAR)
OUTGOING
2 Nos.200 Amps FP ,MCCB adjustable with rotary
handle for 4 BHK, SPARE
4 Nos. 100 Amps FP ,MCCB adjustable with rotary
handle for 2 BHK-1, 2 BHK-2, 3 BHK & SPARE
OUTGOING
i) 8 Nos. 32 Amps , 10 ka,D Corve, DP MCB
OUTGOING
i) 8 Nos.32 Amps , 10 ka,D Corve, DP MCB
ii) 8 Nos. space for Kwh meter along with locking
set 1 104696.92 104696.92
arrangements
OUTGOING
i) 8 Nos. 63 Amps , 10 ka,D Corve, TPN MCB
ii) 8 Nos. space for Kwh meter along with locking
set 2 145331.02 290662.04
arrangements
PROTECTION INSTRUMENT
i) 1 set of phase indication lights.
ii) 1 sets of indication lights, phase, breaker ON-
OFF, , etc.
iii) 1 no 3 phase combined voltmeter, ammeter &
frequency meter , approved make with following
feature with suitable CT's
a) Latest Micro controller based technology,three
indipendent windows to view V,A & Hz per
phasesimultanously
b) Ultra bright LED Display for clear front & long
distance viewing
c)CT's ratio programable through front key ped
d) Four digit frequency meter with 0.01Hz
resolution
CABLE ENDS
Supplying and making end termination with double
brass compression gland and aluminium lugs for
17.06 following size of PVC insulated and PVC sheathed /
XLPE aluminium conductor cable of 1.1 KV grade
as required.
a) 9.1.32 4x6 sqmm set 10 203 2030
b) 9.1.32 4x10 sqmm set 12 203 2436
c) 9.1.21 3.5*35 sqmm set 2 282 564
d) 9.1.22 3.5*50 sqmm set 10 354 3540
e) 9.1.23 3.5*70 sqmm set 10 394 3940
h) 9.1.24 3.5*95 sqmm set 8 482 3856
g) 9.1.25 3.5*120 sqmm set 4 500 2000
h) 9.1.26 3.5*150 sqmm set 22 592 13024
i) 9.1.27 3.5*185 sqmm set 6 804 4824
j) 9.1.29 3.5*240 sqmm set 14 989 13846
k) 9.1.31 3.5*400 sqmm set 48 1389 66672
b) housing
Supply,Receiving of 1100V grade XLPE AA Cable
17.07
as per follows;
a) 4x6 sqmm mtr 600 125.75 75450
b) 4x10 sqmm mtr 100 158.59 15859
c) 3.5x50 sqmm mtr 275 352.107 96829.425
d) 3.5x70 sqmm mtr 60 477.86 28671.6
e) 3.5x95 sqmm mtr 175 594.53 104042.75
CABLE ENDS
Supplying and making end termination with double
brass compression gland and aluminium lugs for
17.11 following size of PVC insulated and PVC sheathed /
XLPE aluminium conductor cable of 1.1 KV grade
as required.
a) 9.1.32 4x6 sqmm set 30 203 6090
b) 9.1.32 4x10 sqmm set 4 203 812
c) 9.1.11 3.5*50 sqmm set 8 286 2288
d) 9.1.12 3.5*70 sqmm set 2 361 722
e) 9.1.13 3.5*95 sqmm set 8 431 3448
street light
SITC of street LED light- Decorative Energy
Saving LED Street light with PDC Aluminium Body
and Clear Polycarbonate cover. Wide beam
18.07 each 23 9784 225032
distribution. CCT 5700K. IP 66.similar to polycab
cat no PUB0504006 PCGLS TO 70 70 W 5700 K 1
street light
SITC of street LED light- Decorative Energy
Saving LED Street light with PDC Aluminium Body
and Clear Polycarbonate cover. Wide beam
18.15 each 16 9784 156544
distribution. CCT 5700K. IP 66.similar to polycab
cat no PUB0504006 PCGLS TO 70 70 W 5700 K 1
a)Diesel Engine:
Diesel engine 4 stroke, water cooled, electric start,
of suitable BHP at 1500 RPM suitable for following
KVA output of alternator at 40 Degree C, 50%RH &
at 1000 Meter MSL and conforming to BS 5514, BS
649, IS 10000, capable of taking 10% over loading
for one hour after 12 hours of continuous operation.
The engine will be fitted complete with all the
required accessories.
FOUNDATION
14.1 Providing and laying in position reinforced cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) in
19.02 CUM 15.144 5487 83095
foundation of pump, DG set etc. including form
work etc. as required (excluding reinforcement).
cum 5487
SPECIAL FEATURES :
IGBT BASED RECTIFIER AND INVERTER
INPUT VOLT 415V - 15% + 10%, THREE PHASE
4 WIRE
OUTPUT VOLT 415V +/- 1%, THREE PHASE 4
WIRE
OVERALL EFFICEINCY UPTO 94%
OUTPUT FREQUENCY 50 HZ +/- 0.1 HZ
INPUT POWER FACTOR >0.99, CURRENT
HARMONICS <3%
OUTPUT POWER FACTOR 0.9 LAGGING
INBUILT ISOLATION TRANSFORMER
Inclusive SUPPLYING OF BATTERY
ACCESSORIES
a) Battery Rack for 100 KVA UPS
b)Battery Interconnecting Links for 100 KVA UPS
SPECIAL FEATURES :
IGBT BASED RECTIFIER AND INVERTER
INPUT VOLT 230V - 15% + 10%, SINGLE PHASE
4 WIRE
OUTPUT VOLT 230V +/- 1%, SINGLE PHASE
&NEUTRAL
OVERALL EFFICEINCY UPTO 94%
OUTPUT FREQUENCY 50 HZ +/- 0.1 HZ
INPUT POWER FACTOR >0.99, CURRENT
HARMONICS <3%
OUTPUT POWER FACTOR 0.9 LAGGING
INBUILT ISOLATION TRANSFORMER
SUPPLYING OF BATTERY ACCESSORIES
a) Battery Rack for 10 KVA UPS
b)Battery Interconnecting Links for 20 KVA UPS
c) Battery to UPS Cable (Maximum 10 meters) for
10 KVA UPS
d) Battery Fuse Box for 10 KVA UPS.
Exhaust piping
Providing & fixing 150 mm diameter M.S.
Class 'C' diesel pump exhaust pipe
includings all fittings, like bends, tees etc.
clamps / structural steel supports. The
pipe shall be provided with 75mm thick
fiberglass insulation & covering the
insulation with 500 g polythene sheet
giving proper overlaps & sealing the joints
with suitable adhesive compound. The
pipe shall be provided with 24 gauge
aluminium sheet cladding
1.3 M.R. RM 20 1,712.35 34,246.91
2.1
a M.R. 150 nominal bore (class C) M 440 1,883.95 828,939.02
b M.R. 100 nominal bore (class C) M 70 1,360.82 95,257.10
TOTAL 272,707.00
Grand Total 16,058,225.56
4 17.7.1 White vitreous china flat back wash basin size 630
x 450 mm with a pair of 15 mm C.P. brass pillar
taps. Each 163 2,298.55 374,663.65
12.0 17.70 Providing and fixing PTMT Bottle Trap for Wash
basin and sink.
17.70. Bottle trap 31 mm single piece moulded with
1 height of 270 mm, effective length of tail pipe 260
mm from the centre of the waste coupling 77 mm
breadth with 25 mm minimum water seal,
weighing not less than 260 gms. Each 200 293.95 58,790.00
17 18.51 Providing and fixing C.P. brass long body bib cock
of approved quality conforming to IS standards
and weighing not less than 690 gms.
TOTAL 2,640,244.20
SUBHEAD-II(A): INTERNAL DRAINAGE INSTALLATIONS (As per D.S.R.2016)
17.43. 100x100x100mm
1
17.43. Standard cast (spun) iron pipe IS-3989
1.2 Each 178 623.00 110,894.00
100 mm
17.55.
1
Providing and fixing door piece, insertion rubber
17.55. washer 3mm thick, bolts and nuts complete, in
1.2 100mm Centrifugally cast (spun) iron pipe S&S
Each 178 512.65 91,251.70
TOTAL 6,306,822.50
SUBHEAD-III(A): WATER SUPPLY INSTALLATIONS (As per D.S.R.2016)
14.13. 80 mm dia, NB
2 M 100 592.00 59,200.00
14.13. 100 mm dia, NB
3 M 56 828.00 46,368.00
TOTAL 3,443,607.57
SUBHEAD-III (B) : WATER SUPPLY- INTERNAL WORK (NON-SCHEDULED ITEMS)
Absorber area : 2 sq M
Type : Cu - Cu
Weight : 46 Kg (Dry)
Absorber Coating : Selective - NALSUN
Absorbivity : > 0.95
Emissivity : < 0.2
Frame Material : 16 SWG extruded Aluminium
Glazing : Toughened Glass
Glass beeding : EPDM
Finish : Painted by approved shade
Hot water return pump
Hardware : SS 304
Electrical heating back up required
Insulation : PUF
Collector Stand : 35x35x3 mm MS angle
Hot Water Tank : Cylindrical - vertical / horizontal,
Stainless steel 304 grade with 100 mm thick Rock
Wool insulation including 22 SWG aluminium
cladding.
The entire system should be complete with
internal piping in G.I. (class B) with 50 mm rock
wool insulation of density 48 kg/m3 with 26
SWG Al cladding, necessary isolation valves, Y type
CI strainer, hardwares, temperature gauge of
range 0 - 120oC, water meter, MS angle iron
structure of min thickness 3 mm duly painted etc
as required to complete the system in all respects.
TOTAL 2,130,867.00
19.12.2 With Sewer bricks conforming IS : 4885 metre 2.00 6505.15 13,010.30
19.4.3.1180x150 mm size P type With FPS bricks each 31.00 1664.80 51,608.80
TOTAL 1,677,159.45
TOTAL 526,327.76
7.00 DSR 2.11Extra for excavating trenches for pipes, cables etc.
in all kinds of soil for depth exceeding 1.5m,but
not exceeding 3 m.(Rate is over corresponding
basic item for depth up to 1.5 metre).
Mtr. 89.50 324.42 29,035.59
5.33.1 All works upto plinth level. Cu.M 7.56 6,446.45 48,735.16
TOTAL 1,651,759.49
external works
18.12.1 15mm nominal bore RM 20 160.20 3,204.00
18.12.2 20mm nominal bore RM 20 186.30 3,726.00
18.12.6 50mm nominal bore RM 550 342.70 188,485.00
18.12.7 65mm nominal bore RM 65 451.70 29,360.50
18.12.8 80mm nominal bore RM 50 576.30 28,815.00
2.00 DSR Painting GI pipes and fittings with two coats of anti
Item corrosive bitumastic paint of approved quality
18.40
18.40. 15 mm dia, nominal bore 6.00
1 Rm 20 120.00
18.40. 20 mm dia, nominal bore 7.10
2 Rm 20 142.00
18.40. 50 mm dia, nominal bore 14.80
6 Rm 550 8,140.00
18.40. 65 mm dia, nominal bore 18.25
7 Rm 65 1,186.25
18.59. 50 mm dia
1 Each 4 4662.45 18,649.80
18.59. 80 mm dia
2 Each 1 5649.75 5,649.75
18.59. 100 mm dia
3 Each 1 7410.80 7,410.80
TOTAL 424,600.65
TOTAL 2,428,348.00
A) INCOMER
100 A TP MCCB with heavy duty solid neutral link
with (0-100A) ammeter with 3 CT and selector
switch, (0 - 500 V) voltmeter with selector switch,
phase indication light with protection fuse. - 01
Set
B) OUTGOINGS
i) For 2 x 7.5 HP Filter Feed Pumps
12 A TP MCB with 10 A DOL starter, overload
relay, 96 mm (0-25A) ammeter with single CT,
start / stop push buttons, on / off / trip indication
lights with protection fuse, single phase preventer.
- 01 set.
NOTE :
i) All the drainage pumps shall be work cyclic
process i.e. in first operation duty pump work on
duty and stand by pump duty pump work on stand
by and stand by pump work as duty pump.
TOTAL 250,728.75
2.1
Supplying and Earthing with GI earth plate 600mm
x 600 mm x 6mm thick including accessories and
providing masonary enclosure with cover plate
having locking arrangement and watering pipe
DSR etc, with coke and salt ) as required.
5.3 Set 2.0 3,583.00 7,166.00
2.2 Supplying and laying 25 mm x 5 mm. G.I. strip in
40 mm dia. G.I. Pipe from earth electrode, as
required.
5.11 Rm 40.0 351.00 14,040.00
2.3 Providing & fixing 25mm x 5mm G.I. strip on
surface or in recess for connections etc. as
required.
5.15 Rm 200.0 129.00 25,800.00
2.3.1 Providing and Fixing 6 SWG dia G.I. wire on surface
or in recess for loop earthing alongwith existing
surface/ recessed conduit/ submain wiring/ cable
as required.
5.18 Rm 300.0 23.00 6,900.00
2.3.2 Supplying, fabricating and installing following size
of perforated M.S. cable trays, including horizontal
and vertical bends, reducers, tees, cross members
and other accessories as required and duly
suspended from the ceiling with M.S. suspenders
4.1 and including paint
9.1.25 3.5 Core 120 sq. mm. Armoured Aluminium cable. Nos 10.0 500.00 5,000.00
2.5
9.1.21 3.5 Core 35 sq. mm. Armoured Aluminium cable. Nos 80.0 282.00 22,560.00
TOTAL 155,951.00
PH - 7.5-8.5
BOD5 - 300 mg/ltr
COD - 500 mg/ltr.
SS - 300 mg/ltr.
Oil & Grease - 150 mg/ltr
Ecoli - >106 MPN
Ammonical Nitrogen - 50 ppm
Capacity : 10 Cum/hr.
Head : 30 - 35 Mtrs
Type of Pump : Horizonal Centrifugal pump
Total No. of Pumps (2 Nos. – 1 W + 1 S) Set 1 135,000.00 135000
26.0
Variable Pore Microfiltration System for Flushing
27.0
Providing, installing, testing and commissioning of
Water Flow meter Electro magnetic type suitable
for 0-25000 LPH - suitable sizes /dia ( Inlet To STP
& Treated water Line)
Nos. 2 15,000.00 30000
28.0
Providing, installing, testing and commissioning of
Online digital type pH meter.
Nos. 1 50,000.00 50000
Note:
All technical liasioning, inputs, documents,
meeting with Pollution Control Board for
“Consent to operate” including arranging raw
sewage for testing and commissioning shall be in
the scope of Contractor. Contractor shall include
the cost of all chemicals consumed during testing
& commissioning and the cost of such items of
works which are not explicitly mentioned above
but are mandatory to have pollution board
approval. However responsibility of obtaining
license for consent to operate shall be in other
agency's scope.
C. ELECTRICAL INSTALLATION
ELECTRICAL PANEL
Incomer
200A TP+N MCCB (35KA)
Metering
(0-500) volts digital voltmeter with selector switch
protected by 2A control MCB's
(0-200A) Digital ammeter with Selector Switch and
suitable ratio, CL-1, 10VA CT's
Phase indicating lamps with toggle switches
Bus Bar:
Outgoing:
1 No. 63A TPN MCCB for Hydropneumatic system
PLC PANEL
TOTAL 5,976,550.00
SECTION - XI
BORE WELL INSTALLATIONS (As per D.S.R.2016)
total 28,302,872.62