Professional Documents
Culture Documents
Volt per Amp Ratio at 2A for 100 Ohms load 0.097 V/A
Load Resistance RL in ohms
10
Infinity
10K 5K 2K 10
1K 0 200 400 600 800 1000
1
Percent ratio error in %
500
200
Typical Excitation Curve
100
100
0.1 50
Sec RMS Exciting Voltage in Volts
0.01 10
1 10 100
Input Current in Amps
Mechanical Drawing
1
11.50 23.80
25.00
0.1
5.00±1
0.01 0.1 1 10 100 1000
Ø9.50 Notes: Sec RMS Exciting current in mA
Ø0.813 1) Unless requested, the terminating resistor and the one-turn
15.24
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
7.62
Dimensional Unit: mm 1
1.94
Dimensional Tolerance: ±0.25mm (Unless Specified)
1 - Turn 20A 1/8W
Pin Pitch Tolerance: ±0.10mm 20mA RL 2.0V
Primary 100 Ohms
Europe
Germany Ireland Czech Republic
(Design, Sales & Marketing) (Design, Sales & Marketing) (Design, Manufacturing, Sales & Marketing)
07/18