Professional Documents
Culture Documents
Dino Bridge D400mm Circle
Dino Bridge D400mm Circle
00
Computer program for the Strength Design of Reinforced Concrete Sections
Copyright - 1988-2020, STRUCTUREPOINT, LLC.
All rights reserved
Licensee stated below acknowledges that STRUCTUREPOINT (SP) is not and cannot be responsible for either the accuracy or adequacy of the material supplied
as input for processing by the spColumn computer program. Furthermore, STRUCTUREPOINT neither makes any warranty expressed nor implied with respect to
the correctness of the output prepared by the spColumn program. Although STRUCTUREPOINT has endeavored to produce spColumn error free the program is
not and cannot be certified infallible. The final and only responsibility for analysis, design and engineering documents is the licensee's. Accordingly,
STRUCTUREPOINT disclaims all responsibility in contract, negligence or other tort for any analysis, design or engineering documents prepared in connection with
the use of the spColumn program. Licensed to: Chandra Sajana, IYANA BALI. License ID: -2918F
STRUCTUREPOINT - spColumn v6.00 Page | 2
Licensed to: Chandra Sajana, IYANA BALI. License ID: -2918F 3/30/2020
C:\Users\Chandra Sajana\Documents\SP Column\Dino Bridge D400mm Circle.col 12:16 AM
Contents
1. General Information.............................................................................................................................................. 3
2. Material Properties............................................................................................................................................... 3
2.1. Concrete........................................................................................................................................................ 3
2.2. Steel.............................................................................................................................................................. 3
3. Section................................................................................................................................................................. 3
3.1. Shape and Properties.................................................................................................................................... 3
3.2. Section Figure............................................................................................................................................... 4
4. Reinforcement...................................................................................................................................................... 4
4.1. Bar Set: ASTM 615M.................................................................................................................................... 4
4.2. Confinement and Factors.............................................................................................................................. 4
4.3. Arrangement................................................................................................................................................. 4
5. Factored Loads and Moments with Corresponding Capacities.............................................................................5
List of Figures
Figure 1: Column section.......................................................................................................................................... 4
y
x
STRUCTUREPOINT - spColumn v6.00 Page | 3
Licensed to: Chandra Sajana, IYANA BALI. License ID: -2918F 3/30/2020
C:\Users\Chandra Sajana\Documents\SP Column\Dino Bridge D400mm Circle.col 12:16 AM
1. General Information
File Name C:\Users\Chandra...\Dino Bridge
D400mm Circle.col
Project Dino Bridge
Column D400
Engineer CS
Code ACI 318-14
Bar Set ASTM 615M
Units Metric
Run Option Investigation
Run Axis Biaxial
Slenderness Not Considered
Column Type Structural
2. Material Properties
2.1. Concrete
Type Standard
f'c 28 MPa
Ec 24870.1 MPa
fc 23.8 MPa
εu 0.003 mm/mm
β1 0.846954
2.2. Steel
Type Standard
fy 390 MPa
Es 200000 MPa
εyt 0.00195 mm/mm
3. Section
3.1. Shape and Properties
Type Circular
Diameter 400 mm
Ag 125664 mm2
Ix 1.25664e+009 mm4
Iy 1.25664e+009 mm4
rx 100 mm
ry 100 mm
Xo 0 mm
Yo 0 mm
STRUCTUREPOINT - spColumn v6.00 Page | 4
Licensed to: Chandra Sajana, IYANA BALI. License ID: -2918F 3/30/2020
C:\Users\Chandra Sajana\Documents\SP Column\Dino Bridge D400mm Circle.col 12:16 AM
y
x
4. Reinforcement
4.1. Bar Set: ASTM 615M
Bar Diameter Area Bar Diameter Area Bar Diameter Area
mm mm2 mm mm2 mm mm2
#10 9.50 71.00 #13 12.70 129.00 #16 15.90 199.00
#19 19.10 284.00 #22 22.20 387.00 #25 25.40 510.00
#29 28.70 645.00 #32 32.30 819.00 #36 35.80 1006.00
#43 43.00 1452.00 #57 57.30 2581.00
4.3. Arrangement
Pattern All sides equal
Bar layout Circular
Cover to Transverse bars
Clear cover 30 mm
STRUCTUREPOINT - spColumn v6.00 Page | 5
Licensed to: Chandra Sajana, IYANA BALI. License ID: -2918F 3/30/2020
C:\Users\Chandra Sajana\Documents\SP Column\Dino Bridge D400mm Circle.col 12:16 AM
Bars 10 #16
P ( kN)
4000
(P max)
0 200
M (9.8°) ( kNm)
(P min)
-1000