Professional Documents
Culture Documents
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
Lab.
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
High Performance DC Power Supplies speed and accuracy for test optimization
Precision Multiple-Output
25 W-50 W GPIB
Up to four fully isolated power supplies in a 3 U package
Fast, low-noise outputs
Dual-range, precision low current measurement
Built-in measurements and advanced programmable features
Protection features to ensure DUT safety
6625A, 6626A, 6628A, 6629A
Two or four isolated outputs Output power Low-range volts, amps 0 to 7 V, 0 to 15 mA 0 to 16 V, 0 to 200 mA
are integrated into one package, High range volts, amps 0 to 50 V, 0 to 500 mA 0 to 50 V, 0 to 1 A or
conserving rack space and GPIB 0 to 16 V, 0 to 2 A
addresses. Dual ranges allow for Output combinations
more current at lower voltage levels. for each model
The outputs can be connected in (total number of outputs) 6625A (2) Precision 1 1
parallel or series to further increase 6626A (4) Precision 2 2
the flexibility that these products 6628A (2) Precision — 2
offer the system designer. Program- 6629A (4) Precision — 4
ming is done using industry Programming accuracy Voltage 1.5 mV + 0.016% (low) 3 mV + 0.016% (low)
standard SCPI commands and (at 25°C ±5°C) 10 mV + 0.016% (high) 10 mV + 0.016% (high)
test system integration can be Current 15 µA + 0.04% (low) 185 µA + 0.04% (low)
100 µA + 0.04% (high) 500 µA + 0.04% (high)
further simplified be using the
Readback accuracy Voltage 0.016% + 2 mV (low) 0.016% + 3.5 mV (low)
VXIPlug&Play drivers. These (at 25°C ±5°C) 0.016% + 10 mV (high) 0.016% + 10 mV (high)
power supplies help reduce test +/-Current 0.03% + 15 µA (low) 0.04% + 250 µA (low)
time with fast up and down pro- 0.03% + 130 µA (high) 0.04% + 550 µA (high)
gramming, which is enhanced by Ripple and noise Constant voltage rms 500 µV 500 µV
the active down-programmer (peak-to-peak, 20 Hz to 20 M Hz; peak-to-peak 3 mV 3 mV
which can sink the full rated rms, 20 Hz to 10 M Hz)
current. Constant current rms 0.1 mA 0.1 mA
Load regulation Voltage 0.5 mV 0.5 mV
These power supplies are very Current 0.005 mA 0.01 mA
useful on the R&D bench. The Load cross regulation Voltage 0.25 mV 0.25 mV
accuracy of both the programming Current 0.005 mA 0.01 mA
and the measurement systems Line regulation Voltage 0.5 mV 0.5 mV
allow precise control and monitor- Current 0.005 mA 0.01 mA
ing of prototype bias power. The T ransient response time Less than 75 µs for the output to recover to within
extensive protection features protect change within specfications 75 mV of nominal value following a load
valuable prototypes, including very Supplemental Characteristics (Non-warranted characteristics determined
fast CV/CC crossover. The power by design and useful in applying the product)
supply can be controlled from either 25-watt output 50-watt output
the front panel keypad or, for auto- Average programming resolution Voltage 460 µV (low) 1 mV (low)
mated testing, from the GPIB. 3.2 mV (high) 3.2 mV (high)
Current 1 µA (low) 13 µA (low)
33 µA (high) 131 µA (high)
OVP 230 mV 230 mV
Output programming response time 6 ms 6 ms
(time to settle within 0.1% of full scale output, after Vset command has been processed)
69
High Performance DC Power Supplies speed and accuracy for test optimization
10 Practical Tips Y ou Need to Opt 100 87 to 106 Vac, 47 to 66 Hz Input, Opt 0L2 Extra copy of standard
K now About Y our Power Products 6.3 A (Japan only) printed documentation package
5965-8239E Opt 120 104 to 127 Vac, 47 to 63 Hz Opt 0B0 Full documentation on
Opt 220 191 to 233 Vac, 47 to 66 Hz, 3.0 A CD-ROM only
10 Hints for U sing Y our Power Supply
Opt 240 209 to 250 Vac, 47 to 66 Hz, 3.0 A Opt 0B3 Service Manual
to Decrease Test Time
5968-6359E Opt 750 Relay Control and DFI/RI * Support rails required
Supplemental Characteristics
for all model numbers
DC Floating V oltage: All outputs can be Agilent Models: 6625A, 6626A, 6628A, 6629A
floated up to ±240 Vdc from chassis
ground
Top
Remote Sensing: Up to 10 V drop per 497.8mm
Terminal Strip Detail
load lead. The drop in the load leads is Terminal Strip Detail 19.6"
subtracted from the voltage available
for the load. Output 2 & 3
Output
-OV 2 &-V3 +V +S
+OV -S
Command Processing Time: 7 ms typical -OV +OV -S -V +V +S
Screw Size:
with front-panel display disabled ScrewM35
Size:x 0.6
M35 x 0.6
Input Power: 550 W max., 720 VA max. 425.5mm
16.75"
GPIB Interface Capabilities: SH1, AH1, T6,
L4, SR1, RL1, PP1, DC1, DT0, C0, E1. Output
Output 1 &14& 4
+S +V -V +S +OV -OV
Software Driver: +S +V -V +S +OV -OV
VXIPlug&Play
Regulatory Compliance: Listed to UL 1244;
conforms to IEC 61010-1.
518.2mm
Size: 425.5 mm W x 132.6 mm H x 20.4"
497.8 mm D (16.75 in x 5.22 in x 19.6 in) Output 2 Output 4
70