Professional Documents
Culture Documents
602029B0F4001 -- Protecta*Lite
Product Specifications
With Insulator No
Notes
Protecta*Lite assemblies can be customized for all distribution and transmission lines. This e-Catalog represents a sampling of typical configurations. Please contact your Ohio Brass representative for
details. Selection of arrester MCOV size is based upon the maximum continuous voltage that is applied across the arrester in service (line-to-ground). For arresters on effectively grounded neutral
systems, this is normally the maximum line-to-ground voltage — e.g., 84kV on a 138 kV system. For ungrounded or impedance-grounded systems, the MCOV should be at least 90 percent of
maximum phase-to-phase voltage. For more information about arrester selection, please contact us.
Features
All contents Copyright © 2007 Hubbell Power Systems, Inc. All rights reserved.
NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.