Professional Documents
Culture Documents
article=46
HOME ABOUT BSSA TECHNICAL HELP FIND A SUPPLIER NEWS TRAINING EVENTS BSSA MEMBERS CONTACT US
Home Technical Help Technical Library Standards, Specifications & Grades BS/BSEN Grades Compositions Properties
As an alternative to scanning down the list try the 'find' facility on your keyboard, using the 'Ctrl' and 'F' keys
FEATURED ARTICLES &
together. Type in the term you are looking for in the dialog box that then appears.
PUBLICATIONS
BSSA Guide to Stainless Steel The data given is not intended to replace that shown in individual standards to which reference should always
Specifications - NEW 2010 be made.
Edition - NOW AVAILABLE!
Getting the Best out of BS EN 10088-3 chemical composition tables
Stainless Steel Designation Chemical composition % by mass max unless stated
Special Grades of Stainless Steel
Steel name C Si Mn P S N Cr Cu Mo Ni Others
Steel - Where to Find Them number
Ferritic stainless steels-standard grades
BSSA Understanding Stainless X2CrNi12 1.4003 0.030 1.00 1.50 0.040 0.030 0.030 10.5/12.5 - - 0.30/1.00 -
Steel X6Cr13 1.4000 0.08 1.00 1.00 0.040 0.030 - 12.0/14.0 - - - -
Duplex Stainless Steels - A X6Cr17 1.4016 0.08 1.00 1.00 0.040 0.030 - 16.0/18.0 - - - -
Simplified Guide X6CrMoS17 1.4105 0.08 1.50 1.50 0.040 0.15/0.35 - 16.0/18.0 - 0.20/0.60 - -
X6CrMo17-1 1.4113 0.08 1.00 1.00 0.040 0.030 - 16.0/18.0 - 0.90/1.40 - -
Fabricating Duplex Stainless
Ferritic stainless steels-special grade
Steel
X2CrTi17 1.4520 0.025 0.50 0.50 0.040 0.015 0.015 16.0/18.0 - - - Ti: 0.30/0.60
Importance of Surface Finish X3CrNb17 1.4511 0.05 1.00 1.00 0.040 0.030 - 16.0/18.0 - - - Nb: 12xC/1.00
in the Design of Stainless Ti: 0.30/0.80 (C+N):
Steel X2CrMoTiS18-2 4 1.4523 0.030 1.00 0.50 0.040 0.15/0.35 - 17.5/19.0 - 2.00/2.50 -
0.040
More Than Just Scratching the Nb:
X6CrMoNb17-1 1.4526 0.08 1.00 1.00 0.040 0.015 0.040 16.0/18.0 - 0.80/1.40 -
[7x(C+N)+0.10]/1.00
Surface - A Practical Approach
Ti: 0.10/0.60 Nb:
to Surface Finish X2CrTiNb18 1.4509 0.030 1.00 1.00 0.040 0.015 - 17.5/18.5 - - -
[(3xC)+0.30]/1.00
The Then and Now of Martensitic stainless steels-standard grades
Electropolishing X12Cr13 1.4006 0.08/0.15 1.00 1.50 0.040 0.030 - 11.5/13.5 - - 0.75 -
Structural Sections in Stainless X12CrS13 1.4005 0.06/0.15 1.00 1.50 0.040 0.15/0.35 - 12.0/14.0 - 0.60 - -
Steel X15Cr13 1.4024 0.12/0.17 1.00 1.00 0.040 0.030 - 12.0/14.0 - - - -
X20Cr13 1.4021 0.16/0.25 1.00 1.50 0.040 0.030 - 12.0/14.0 - - - -
Stainless steel fasteners X30Cr13 1.4028 0.26/0.35 1.00 1.50 0.040 0.030 - 12.0/14.0 - - - -
European Standards - X39Cr13 1.4031 0.36/0.42 1.00 1.00 0.040 0.030 - 12.5/14.5 - - - -
Referenced Standards for X46Cr13 1.4034 0.43/0.50 1.00 1.00 0.040 0.030 - 12.5/14.5 - - - -
Stainless Steel Products X38CrMo14 1.4419 0.36/0.42 1.00 1.00 0.040 0.015 13.0/14.5 - 0.60/1.00
X50CrMoV15 1.4116 0.45/0.55 1.00 1.00 0.040 0.030 - 14.0/15.0 - 0.50/0.80 - V: 0.10/0.20
European EN Standard Grade
X55CrMo14 1.4110 0.48/0.60 1.00 1.00 0.040 0.030 13.0/15.0 0.50/0/80 V: < 0.15
Summary
X14CrMoS17 1.4104 0.10/0.17 1.00 1.50 0.040 0.15/0.35 - 15.5/17.5 - 0.20/0.60 - -
Stainless Steel Grades X39CrMo17-1 1.4122 0.33/0.45 1.00 1.50 0.040 0.030 - 15.5/17.5 - 0.80/1.30 1.00 -
Datasheets X17CrNi16-2 1.4057 0.12/0.22 1.00 1.50 0.040 0.030 - 15.0/17.0 - - 1.50/2.50 -
Selection of stainless steels X3CrNiMo13-4 1.4313 0.05 0.70 1.50 0.040 0.015 0.020 12.0/14.0 - 0.30/0.70 3.5/4.5 -
for the food processing X4CrNiMo16-5-1 1.4418 0.06 0.70 1.50 0.040 0.030 0.020 15.0/17.0 - 0.80/1.50 4.0/6.0 -
industries Martensitic stainless steels-special grades
X29CrS13 1.4029 0.25/0.32 1.00 1.50 0.040 0.15/0.25 - 12.0/13.5 - 0.60 - -
Stainless Steel Pipe
X46CrS13 1.4035 0.43/0.50 1.00 2.00 0.040 0.15/0.35 - 12.5/14.0 - - - -
Fabrication X70CrMo15 1.4109 0.60/0.75 0.70 1.00 0.040 0.030 - 14.0/16.0 - 0.40/0.80 - -
Stainless Steel in Indoor X40CrMoVN16-2 1.4123 0.35/0.50 1.00 1.00 0.040 0.015 - 14.0/16.0 - 1.00/2.50 0.50 V: 1.50 N: 0.10/0.30
Swimming Pool Buildings X105CrMo17 1.4125 0.95/1.20 1.00 1.00 0.040 0.030 - 16.0/18.0 - 0.40/0.80 - -
BSSA Stainless Steel Surface X90CrMoV18 1.4112 0.85/0.95 1.00 1.00 0.040 0.030 - 17.0/19.0 - 0.90/1.30 - V: 0.07/0.12
Finishes Pack Ti: 0.010 V:
X2CrNiMoV13-5-2 1.4415 0.030 0.50 0.50 0.040 0.015 - 11.5/13.5 - 1.50/2.50 4.5/6.5
0.10/0.50
Precipitation hardening stainless steels-standard grades
X5CrNiCuNb16-4 1.4542 0.07 0.70 1.50 0.040 0.030 - 15.0/17.0 3.0/5.0 0.60 3.0/5.0 Nb: 5xC/0.45
X7CrNiAl17-7 1.4568 0.09 0.70 1.00 0.040 0.015 - 16.0/18.0 - - 6.5/7.8 Al: 0.70/1.50
X5CrNiMoCuNb14-5 1.4594 0.07 0.70 1.00 0.040 0.015 - 13.0/15.0 1.20/2.00 1.20/2.00 5.0/6.0 Nb: 0.15/0.60
Precipitation hardening stainless steels-special grades
Al: 0.60/0.80 Ti:
X1CrNiMoAlTi12-9-2 1.4530 0.015 0.10 0.10 0.010 0.005 0.010 11.5/12.5 - 1.85/2.15 8.5/9.5
0.28/0.37
Al: 0.80/1.10 Ti:
X1CrNiMoAlTi12-10-2 1.4596 0.015 0.10 0.10 0.010 0.005 0.020 11.5/12.5 - 1.85/2.15 9.2/10.2
0.28/0.40
B: 0.0010/0.010 Al:
< 0.35
X5NiCrTiMoVB25-12-2 1.4606 0.08 1.00 1.00/2.00 0.025 0.015 - 13.0/16.0 - 1.00/1.50 24.0/27.0 Ti:1.90/2.30
V: 0.10/0.50
1 de 2 09/03/2011 17:29
Article: Chemical composition of stainless steels to BS EN 10088-3 http://www.bssa.org.uk/topics.php?article=46
2 de 2 09/03/2011 17:29