Professional Documents
Culture Documents
Correlation 2
Day, Date 8:00 – 12:00 AM
--------------------------------------------------------------------------------------------
GEAS Set A
INSTRUCTION: Select the correct answer for each of the following questions. Mark ONLY ONE ANSWER for each item by
shading the box corresponding to the letter of your choice on the answer sheet provided. STRICTLY NO ERASURES
ALLOWED.
MULTIPLE CHOICE:
15. Express the unit vector directed toward the point (0,0,h) 23. Find the force on a point charge of 30 C at (0,0,5) m
from an arbitrary point in the plane z = -2. due to a 4 m square in the z = 0 plane between x = 2m
( h 2) a and y = 2m with a total charge of 500 C, distributed
A.
z
uniformly.
( h 2) 2 A. 4.66az N*
B. 5.65az N
( h 2) a C. 6.64az N
B.
z
D. 7.63az N
( h 2) 2
24. Two uniform line charges of L = 4 nC/m each are
xax ya y ( h 2) a z
C. parallel to the z axis at x = 0, y = 4m. Determine the
x 2 y 2 ( h 2) 2 electric field E at (4, 0,z) m.
A. 17 ax V/m
xa x ya y (h 2)a z B. 18 ax V/m*
D. * C. 19 ax V/m
x 2 y 2 (h 2) 2
D. 20 ax V/m
a x 3a y 6a z
4 ya y 2 za z C. 30 V / m *
C. 46
16 4 z 2
ax 3a y 6a z
4 ya y 2 za z D. 40 V / m
D. 46
2
16 4 z
26. Two uniform charge distributions are as follows: a sheet
17. This type of organization is very effective in similar firms of uniform charge density S = -50 nC/m2 at y = 2 m and a
especially “single business firms where key activities revolve uniform line of L = 0.2C/m at z = 2 m, y = -1 m. At what
around well-defined skills and areas of specialization”. points in the region will E be zero?
A. Functional Organization* A. (-x, -3.272, -1) m
B. Product or Market Organization B. (-x, 2.273, -2.0) m
C. Matrix Organization C. (x, 3.272, 1) m
D. Divisible Organization D. (x, -2.273, 2.0) m*
18. A specialist’s right to oversee lower level personnel 27. A point charge, Q = 3 nC, is located at the origin of a
involved in that specialty, regardless of where the personnel cartesian coordinate system. What flux crosses the portion
are in the organization. of the z = 2 m plane for which -4 ≤ x ≤ 4 m and -4 ≤ y ≤ 4 m?
A. Line authority A. 0.5 nC*
B. Staff authority B. 0.6 nC
C. Functional authority* C. 0.7 nC
D. Head authority D. 0.8 nC
28. For a project manager to have an effective means of 39. Four point charges, each 20 C, are on the x and y axes
identifying and communicating the planned activities and at 4 m. Find the force on a 100 C point charge at (0, 0, 3)
their interrelationships, he must use a network technique. m.
One of the network techniques is commonly known as CPM. A. 0.37 az N
What does CPM stands for? B. 1.73 az N*
A. Critical plan method C. 2.37 az N
B. Critical path method* D. 3.73 az N
C. Critical project method
D. Coordinated plan method 40. Two meters from the z axis, |E| due to uniform line
charge along the z axis is known to be 1.80 x 104 V/m. Find
29. The CPM was developed by Rand and Walker in what the uniform charge density.
year? A. 4 C/m
A. 1957* B. 3 C/m
B. 1958 C. 2 C/m*
C. 1959 D. 1 C/m
D. 1960
41. The circular disk r ≤ 2m in the z = 0 plane has a charge
30. In what year was PERT developed?
density of S = 10-8/r (C/m2). Determine the electric field E
A. 1957
for the point (0,,h)
B. 1958*
1.31 10 3
a z V / m
C. 1959
D. 1960 A.
h 2 h2
31. The circular disk r ≤ 1m, z = 0, has a charge density S = 1.13 10 3
2(r2 + 25)3/2e-10r (C/m2). Find E at (0,0,5)m. B. a z V / m
A. 6.65ax GV/m h 4 h2
B. 5.66ax GV/m* 1.31 103
C. 4.65ax GV/m C. a z V / m
D. 3.66ax GV/m h 2 h2
1.13 103
32. A finite sheet of charge, of density S = 2x (x2 + y2 + 4)3/2 D. a z V / m *
(C/m2), lies in the z = 0 plane for 0 ≤ x ≤ 2 m and 0 ≤ y ≤ 2 h 4 h2
m. Determine E at (0,0,2) m.
A. (-69 ax – 27ay + 414az) GV/m
B. (69 ax + 27ay - 414az) GV/m 42. Energy can be expressed in _____.
C. (-96 ax – 72ay + 144az) GV/m* A. N/s
D. (96 ax + 72ay - 144az) GV/m B. N-m *
C. N-s
33. The following are considered theories of Motivation D. N-m/s
except:
A. Maslow’s Needs Hierarchy Theory
B. Expectancy Theory 43. The frictional force is not _______ to the area of
C. Herzberg’s Two-Factor Theory contact.
D. Gagarin’s Theory* A. dependent *
B. inversely proportional
34. In Morris life cycle model, a project is divided into how C. independent
many stages to be performed in sequence? D. directly proportional
A. 3
B. 4*
C. 5 44. The compression stroke in a gasoline engine can
D. 6 be used as an example of ____ process
A. isobaric
35. The tort law is concerned with______. B. isochoric
A. imprisonment C. adiabatic *
B. fine D. isothermal
C. compensation for the injury*
D. punishment
45. In mechanics, it refers to the force that makes a
36. What is a civil wrong committed by one person causing body follow a curved path.
damage to another person of his property, emotional well- A. centripetal force *
being, or reputation? B. normal force
A. Consequential damage C. gravitational force
B. Fraud D. centrifugal force
C. Punitive damage
D. Tort*
46. The following is an intensive property EXCEPT?
37. Given that D = (5r2/4) ar in spherical coordinates, find A. Color
the volume enclosed between r =1 and r = 2. B. Taste
A. 73π C. Surface area *
B. 74π D. Melting point
C. 75π*
D. 76π
58. How many mol of solute is required to produce 68. What is the final temperature of aluminum if 57.2
2.00 liters of 2.25Msolution? BTU of energy is applied to a 15 lb aluminum at an
A. 2.5 mol initial temperature of 25 oF? Note: specific heat of
B. 4.5 mol * aluminum is 0.212 Btu/lbF.
A. 43 oF * B. elastic range *
B. 45 oF C. irreversible range
C. 47 oF D. plastic range
D. 49 oF
78. Determine the inside diameter of a hallow steel tube that
69. A material is _____ if, when subjected to stress, it will carry a tensile load of 500kN at a stress of 140Mpa.
breaks without significant deformation (strain). Assume the wall thickness to be one-tenth of the outside
A. Brittle * diameter.
B. Malleable A. 89.92 mm *
C. Hard B. 92.98 mm
D. Ductile C. 112.4 mm
D. 114.2 mm
76. How high above the table should an 80mm diameter 87. When one of the factors of production is fixed in quantity
billiard ball be struck by the cue ball so that it will roll without or is difficult to increase, increasing the other factors of
friction? production will result in a less than proportional increase in
A. 56 mm * output.
B. 40 mm A. Law of demand
C. 65 mm B. Law of supply and demand
D. 46 mm C. Law of supply
D. Law of diminishing return *
77. The linear portion of the stress-strain diagram of steel is
known as
A. modulus of elongation
88. A land development project costs 5,000,000 pesos with 98. If the volume of the confined gas is constant, the
the benefits of 10,000,000 pesos and disbenefits of pressure is directly proportional to the absolute temperature.
1,500,000 pesos. What is the benefit cost ratio? This is known as:
A. 1.7 * A. Ideal Gas Law
B. 1.6 B. Boyle’s Law
C. 1.5 C. Charles’ Law
D. 2.0 D. Gay-Lussac’s Law *
89. The charge to which the borrowers pay to the lender for 99. Energy can neither be destroyed nor created is the
the use of his money is ______. law of:
A. principal A. conservation of momentum
B. annuities B. conservation of energy *
C. depreciation C. conservation of mass
D. interest * D. none of these
93. If a product is sold at P150 per unit with direct labor cost
of P20 per unit, materials and other direct costs of P27 per
unit. Determine the number of units to be produced to
break-even if the monthly fixed cost is P15,000.
A. 147
B. 145
C. 144
D. 146 *