Professional Documents
Culture Documents
100% 0% 48 264
Plagiarised Unique Words Characters
50% Plagiarised
given that a diameter of the prime pulley is 60cm. assuming slip of 3 percent, determine the diameter of generator of pulley, if the belt
thickness is 6mm. [answer: 0.346m]. 2. a pulley is 15cm in a diameter mounted on induction motor shaft running at 950rpm.
https://www.scribd.com/document/396056132/Assignment-1B-Belt-Drive-pdf
50% Plagiarised
assuming slip of 3 percent, determine the diameter of generator of pulley, if the belt thickness is 6mm. [answer: 0.346m]. 2. a pulley is
15cm in a diameter mounted on induction motor shaft running at 950rpm. drives a main shaft at 300rpm by belt drive. the belt is
15mm thickness and 15mm wide.
https://www.scribd.com/document/345626073/Assignment-1-DAM-31703