Professional Documents
Culture Documents
The cell reconfiguration procedure is performed to reconfigure a cell in the NodeB. This chapter
describes the cell reconfiguration procedure in terms of protocols, triggering conditions,
signaling procedure, and signaling tracing on the RNC LMT.
The compliance protocol is the 3GPP TS25.433 "UTRAN Iub interface Node B Application
Part (NBAP) signaling".
To modify parameters of the cell in the NodeB, run the MOD CELL command online on the
RNC LMT.
Prerequisite
l The RNC LMT works properly.
l You have logged in to the RNC with an account authorized to perform tracing management.
Context
Table 2-1 lists the messages to be traced.
CELL RECONFIGURATION
NBAP_CELL_RECFG_REQ
REQUEST
CELL RECONFIGURATION
Iub NBAP_CELL_RECFG_RSP
RESPONSE
CELL RECONFIGURATION
NBAP_CELL_RECFG_FAIL
FAILURE
Procedure
Create an Iub tracing task by referring to Creating an RNC Tracing Task.
Figure 2-2 shows an example of Iub signaling tracing result.
----End