Professional Documents
Culture Documents
BOTTLED WATER
Filter Cartridges
Features Benefits
• Validated retention to industry • Ensures the safety of the water
regulated organisms prior to bottling
0.45 µm
Differential Pressure (mbar)
75
Differential Pressure (psi)
1.0
50
0.5
25
0 0
0 5 10 15 20
BOTTLED WATER
Specifications
Materials of Construction Effective Filtration Area (EFA)
Filtration Membrane: Polyethersulphone 10¨ (250 mm) Up to 0.6 m2 (6.45 ft2) Integrity Test Data
Upstream Support: Polyester All filters are flushed with pharmaceutical
Downstream Support: Polyester Cleaning and Sterilization grade purified water prior to despatch. They
Inner Support Core: Polypropylene BEVPOR PS cartridges can be repeatedly are integrity tested to the following limits:
Outer Protection Cage: Polypropylene steam sterilized in-situ or autoclaved at up
End Caps: Nylon to 130 °C (266 °F). They can be sanitized with Diffusional Flow Micron Rating
End Cap Insert: 316L Stainless Steel hot water at up to 90 °C (194 °F) and are Test Parameters 0.20 0.45
Standard o-rings: Silicone compatible with a wide range of chemicals.
Please refer to our Clean in Place support Test Pressure (barg) 1.7 1.4
Europe: ✆ +44 (0)191 4105121 dhprocess@parker.com | North America: ✆ toll free: +1 877 784 2234 dhpsales.na@parker.com | www.parker.com/processfiltration
Food Contact Compliance guide or contact your local Parker Test Pressure (psig) 25.0 20.0
Materials conform to the relevant representative for more information. Max Diffusional
Flow per 10¨ (ml /min) 16.0 16.0
requirements of 21CFR Part 177,
current EC1935 / 2004 and current USP Retention Characteristics
Plastics Class VI - 121 °C and ISO10993 0.2µm BEVPOR PS filters have been Manufacturing Traceability
equivalents. validated to provide sterile effluent after Each filter element displays the product
bacterial challenge testing following ASTM description, product code and lot number.
Recommended Operating Conditions F838-05 methodology on 10” cartridges with Additionally each filter module displays a
Up to 70 °C (158 °F) continuous operating more than 107cfu per 10” cartridge using unique serial number providing full
temperature and higher short-term Brevundimonas diminuta. manufacturing traceability.
temperatures during CIP to the following
limits: In addition, challenges with the following EU
regulated organisms have been performed.
Temperature Max Forward dP
°C °F (bar) (psi) Organism LRV when challenged with a
minimum of 107 cfu per cm2
20 68 5.0 72.5
40 104 4.0 58.0 0.20 0.45
60 140 3.0 43.5
80 176 2.0 29.0 Serratia marcescens FR FR
90 194 1.0 14.5 Escherichia coli FR FR
>100 (steam) >212 (steam) 0.3 4.0 Enterococcus faecalis FR FR
Clostridium perfringens FR FR
Pseudomonas aeruginosa FR 9.1
Ordering Information
BPS - - A
Code | Length (Nominal) Code | Micron Code | Endcap (10 inch) Code | o-rings
Parker domnick hunter has a continuous policy of product development and although the Company reserves the right to change specifications, it attempts to keep customers informed of any alterations. This publication is for general information only and customers are requested to contact
our Process Filtration Sales Department for detailed information and advice on a products suitability for specific applications. All products are sold subject to the company’s standard conditions of sale. DS_BW_03_06/12 Rev. 1A