Professional Documents
Culture Documents
WINE
Filter Cartridges
Features Benefits
• Validated retention to spoilage • Provides choices for the
organisms stabilization of white and red
wines and removal of yeasts
• Inert material of construction from the wines
0.45 µm
Differential Pressure (mbar)
75
Differential Pressure (psi)
1.0
0.65 µm
50
0.5
1.2 µm
25
0 0
0 5 10 15 20
WINE
Specifications
Materials of Construction Effective Filtration Area (EFA) Integrity Test Data
Filtration Membrane: Polyethersulphone 10¨ (250 mm) Up to 0.6 m2 (6.45 ft2) All filters are flushed with pharmaceutical
Upstream Support: Polyester grade purified water prior to despatch. They
Downstream Support: Polyester Cleaning and Sterilization are integrity tested to the following limits:
Inner Support Core: Polypropylene BEVPOR PS cartridges can be repeatedly
Outer Protection Cage: Polypropylene steam sterilized in-situ or autoclaved at up Diffusional Flow Micron Rating
End Caps: Nylon to 130 °C (266 °F). They can be sanitized with Test Parameters 0.45 0.65 1.2
End Cap Insert: 316L Stainless Steel hot water at up to 90 °C (194 °F) and are
Standard o-rings: Silicone compatible with a wide range of chemicals. Test Pressure (barg) 1.4 1.0 0.6
Please refer to our Clean in Place support Test Pressure (psig) 20.0 15.0 9.0
Europe: ✆ +44 (0)191 4105121 dhprocess@parker.com | North America: ✆ toll free: +1 877 784 2234 dhpsales.na@parker.com | www.parker.com/processfiltration
Food Contact Compliance guide or contact your local Parker Max Diffusional
Flow per 10¨ (ml /min) 16.0 16.0 16.0
Materials conform to the relevant representative for more information.
requirements of 21CFR Part 177,
current EC1935 / 2004 and current USP Retention Characteristics Manufacturing Traceability
Plastics Class VI - 121 °C and ISO10993 The retention characteristics of BEVPOR PS Each filter element displays the product
equivalents. filters have been validated by challenges description, product code and lot number.
performed with the following organisms. Additionally each filter module displays a
Recommended Operating Conditions unique serial number providing full
Up to 70 °C (158 °F) continuous operating manufacturing traceability.
temperature and higher short-term Organism LRV when challenged with a
minimum of 107 cfu per cm2
temperatures during CIP to the following
limits: 0.45 0.65 1.2
Temperature Max Forward dP Saccharomyces cerevisiae FR FR FR
°C °F (bar) (psi) Brettanomyces bruxellensis FR FR FR
20 68 5.0 72.5 Lactobacillus brevis FR FR 2.0
40 104 4.0 58.0 Acetobacter oeni FR FR 7.6
60 140 3.0 43.5 Pseudomonas aeruginosa 9.1 8.9 4.8
80 176 2.0 29.0 Serratia marcescens FR FR 2.4
90 194 1.0 14.5
*FR - Fully retentive during challenge
>100 (steam) >212 (steam) 0.3 4.0
Ordering Information
BPS - - A
Code | Length (Nominal) Code | Micron Code | Endcap (10 inch) Code | O-rings
Parker domnick hunter has a continuous policy of product development and although the Company reserves the right to change specifications, it attempts to keep customers informed of any alterations. This publication is for general information only and customers are requested to contact
our Process Filtration Sales Department for detailed information and advice on a products suitability for specific applications. All products are sold subject to the company’s standard conditions of sale. DS_W_03_06/12 Rev. 1A