Professional Documents
Culture Documents
for replacement of the system gauge without shutting down the Seat - Brass
Body - Brass
water supply to the sprinkler system. This design also allows Handwheel - Iron
Authoritys’ Having Jurisdication to test system pressure with an
additional gauge through the second outlet. (The second outlet Sizes:
is normally plugged during installation with a 1/4" IPS pipe plug.) 1/4” IPS
Working Pressure:
Installation 400 WOG
Installation of the three-way Thread Sealing Tape or a suit-
valve can be accomplished able pipe thread sealant such
with normal field installation as PipeFit® Thread Sealant
tools. Make sure the valve Paste with PTFE when in-
is installed according to the stalling the valve. DO NOT
flow indication arrow that has OVERTIGHTEN THREADS.
been cast into the valve body. OVERTIGHTENING MAY
The most common installation CAUSE VALVE FAILURE.
allows for a 1/4" IPS nipple
*UL/ULC Listed 2R97
between the valve and the
water supply being measured.
This assures there will be ad-
equate spacing for the sprin-
kler system gauge from the
riser. Use either PTFE Pipe
Page Bottom
Rated Pressure
Model Type Size In. (psig)
© 2013 UL LLC
W he n the UL Le af Mark is on the product, or whe n the word "Environm e nt" is include d in the UL Mark , ple ase se arch the UL
Environm e nt database for additional inform ation re garding this product's ce rtification.
The appe arance of a com pany's nam e or product in this database doe s not in itse lf assure that products so ide ntifie d have be e n
m anufacture d unde r UL's Follow-Up Se rvice . O nly those products be aring the UL Mark should be conside re d to be C e rtifie d and
cove re d unde r UL's Follow-Up Se rvice . Always look for the Mark on the product.
UL pe rm its the re production of the m ate rial containe d in the O nline C e rtification Dire ctory subje ct to the following conditions: 1.
The Guide Inform ation, Asse m blie s, C onstructions, De signs, Syste m s, and/or C e rtifications (file s) m ust be pre se nte d in the ir
e ntire ty and in a non-m isle ading m anne r, without any m anipulation of the data (or drawings). 2. The state m e nt "R e printe d from
the O nline C e rtifications Dire ctory with pe rm ission from UL" m ust appe ar adjace nt to the e x tracte d m ate rial. In addition, the
re printe d m ate rial m ust include a copyright notice in the following form at: "© 2013 UL LLC ".