Professional Documents
Culture Documents
Quiz 5
Quiz 5
1. In the Uniform Force Method Special Case IV, a column web connection is treated as
though it were a column flange connection.
a. True
b. False
2. In the Seismic Provisions, AISC 341-10, the buckling length of a brace is taken as the
work-point to work-point length of the brace.
a. True
b. False
3. In the extended end plate used in the Session 5 example, there is an upper limit on the
plate thickness that can be ignored.
a. True
b. False
4. The force denoted “F” in the presentation was necessary to deliver the beam gravity
shear to the column web face.
a. True
b. False
Copyright © 2014 1
American Institute of Steel Construction
Bracing Connections and Related Topics Session 5: Vertical Bracing
Connections - Corner Connection Part 2 - High-Seismic Systems –
October 27, 2014
To be submitted by 8:00 p.m. EDT November 14, 2014 – Submit through online
form
6. The effective net area of the brace must be not less than the brace gross area.
a. True
b. False
7. The elliptical interaction equation used for the bi-axial block shear situation is
explicitly required in the AISC Specification or AISC Provisions.
a. True
b. False
9. The primary purpose of the Whitmore section is to provide a method to check gusset
buckling.
a. True
b. False
10. The element of the extended shear plate that provides the required seismic ductility is:
a. The weld
b. The bolts
c. The welds and the bolts
d. The plate
Copyright © 2014 2
American Institute of Steel Construction