Professional Documents
Culture Documents
QUALIFICATIONS:
Four years Electrical Engineering from YMCA Institute of Engineering, Faridabad,
Haryana, India (1971 - 1975)
Computer knowledge- MS Office, MS project, AutoCAD, Excel & PowerPoint.
Member of IEEE (Institute of Electrical and Electronics Engineering) - USA since 1979.
Member of CSIR (Council of Scientific and Industrial Research) - Delhi, India.
Certified as Internal Auditor ISO 9000 from M/s. VINCOTTE ,Worked on: software
packages like EATAP, CORTINA and CALPOS for short circuit current calculations in
electrical network; lighting calculations, Grounding calculations using CYMGRD
software.
WORK EXPERIENCE:
Nature of Jobs handled:
- Sr. Electrical Engineer- Operations support onshore at Dubai Petroleum- Responsible
for Electrical systems maintenance and operations at offshore production platforms.
Technical Adviser.
- Sr. Project manager and Project Coordinator in ABB Transmission & Distribution at
Abu Dhabi- 132/ 11 kV substations at Bateen W16 Substation. All Technical &
commercial matters til handing over of projects- 400/220/33 KV Grid stations at Al
Dahma, Al Era’ad, Maziyad & Al Hayer in Al Ain area Abu Dhabi for ABB H.V.
Technologies Switzerland.
- Design & Supervision of 132kV substations in Haqal, Al Bida & Duba areas – ARAMCO
Saudi Arabia and associated underground and overhead distribution works.
- Supervision, Erection, T & C of 115-13.8kV GIS Substation in Qatif, ARAMCO Saudi Arabia.
- Design, supervision & Erection of 220kV Switchyard for rolling & steel mills, India &
Uganda.
- Design, supervision, Erection, T & C of 4-sub stations 33/11 KV in Mirfa Abu Dhabi, U.A.E.
(Housing, Town, Industrial & Abu Al Abiyad).
- Tested & Commissioned various projects that included third party inspection.
1/7
- Preparation of budgetary cost estimates, Tender Documents, ordering of equipment,
discussions with client & supply authorities, preparation of technical reports, supervision
of site tests, Routine Tests, Type Tests and Special Tests on equipment as per applicable
International Standards.
- Well versed with NEC, IEC, ANSI, IEEE, NFPA, API, NETA, NEMA standards and
specifications.
PROFESSIONAL DETAILS
Company : Dubai Petroleum Establishment, Dubai, U.A.E.
Position Held : Senior Electrical Engineer- Operations Support
Period : From Dec. 2008 until Oct. 2015.
Job Description:
Technical Adviser, analyzed existing and proposed electrical systems for onshore plant
and offshore production facilities, prepared and reviewed electrical engineering design
work connected with minor and/or major capital projects including expenses;
modifications and alterations to existing facilities including installation of new equipment
at facilities, either in-house, or through outside contractors. Studied and analyzed
complex or recurring problems relating to electrical systems and recommend
appropriate solutions
2. Maintain familiarity with all Company offshore power supply, power generation and
distribution systems, including switch gear, turbine and engine driven generators,
large electric motors and cabling
3. Provided the company with expert technical advice to Management for complex or
recurring electrical problems and recommend sound and cost effective solutions as
the problems arise
7. Ensured all drawings, plans, manuals and data books are up-to-date and "as built", and
directed draughtsman to carry out all corrections to drawings to reflect any alternations,
modifications and additions to electrical systems and components
2/7
8. Carried out various duties related to capital investment projects and expense items
for minor electrical modifications, improvements and alterations to existing electrical
equipment to be executed internally. Included conducting feasibility studies,
developing cost estimates in conjunction with other engineering or finance staff,
personally prepared conceptual or detailed designs or reviewed vendors' final design
drawings for approved projects, prepared Capital Authorization Requests (AFE's) for
approval, prepared bills of materials, participated in preparation of purchase orders,
followed up on quotations, conducted technical bid analyses, answered queries from
vendors and recommended suppliers or contractors
10. Carrieed out various other duties related to major capital investment projects and
expense items for modification and improvements to existing facilities or installation
of new facilities to be executed by outside contractors. Included participation in
technical bid analyses, reviewing design drawings submitted by contractors and
proposed amendments as necessary, specifying materials to be used, and
supervising the execution of work to ensure compliance with drawings and Company
specifications and standards, and the use of prescribed materials. Attended site
meetings with contractors as necessary
14. Liaised with draftsmen in the Engineering Drafting Unit to produce sketches and
"detailed" electrical engineering drawings
18. Carried out document/drawings update as per the CAF and project management
process
19. Participated and conducted training for offshore personnel on the upgraded or newly
installed systems
20. Provided Emergency Assistance to offshore operations for any emergency situation
or shutdowns offshore
3/7
Company : ABB Switzerland Ltd., Utility Power Systems, Abu-Dhabi/
ABB Transmission & Distribution Abu Dhabi.
Position Held : Project Manager - Project Coordinator
Period : From July 2003 to April, 2008.
ABB Product exposure:
220 KV GIS switchgear Type ELK 04/ ELK 14.
220 KV SCMS system
400-132 kV, 500 MVA Auto Transformers/ 220-33 KV, 140 MVA Transformers.
33 KV GIS switchgear & Protection- ZX1.2/ ZX2
Protection relays- REF 542/Bus Bar Protection- REB 500/ REL531
Telecommunication equipment – FOX 515
PMS system- 3720 ACM/ 7500 ION Transducers.
Project:
Project management for 132/ 11 kV Substation at W16 Substation including VO’s,
approval of time extension and raising various claims. Supply installation of 132/11
kV S/S at W16. (Contract G1322A)
Reinforcement of 220 KV Grid in Al Ain Area, 220/33 KV Grid Stations at Al Era’ad,
Maziyad, Al Dahma- Remote Telecomm. system in Al Wagon, Zakher, Sanaiya, Al -
Ain Power Station, Al Era’ad & Maziyad.
(Contract no. N-99-0170/ N-00-0301/ N-01-0181 Lot 1 &2).
Repair & rehabilitation of HV S/S Equipment in Abu Dhabi & Al Ain Lot 2 & 8A
(Contract G-1150)
Job Description:
Co-ordination of all Technical and commercial matters concerning above project i.e.:
Telecommunication works. Regional Control Centre integration (RCC). Power
Monitoring System (PMS). Fault Monitoring System/ Event Recording/ Remote
Station Control Monitoring System, Alarm System etc.
Frequent contact with the end users TRANSCO & AADC concerning Technical
matters.
Weekly reporting to Project Manager. Lately involved in remaining Invoicing
including spares (Approx. AED 30 Million)
Contacting resources on time concerning any needed support from Project
Manager/ or Site manager.
Review of As-Built documentation, O & M Manuals, Test Reports, Spare parts & Snag
items.
4/7
- Replacement of 12 Nos. transformers11-0.415 KV/ LVMP- 21 sections/ HV & LV power &
control cables.
- Replacement of 164 Nos. LV DB’s.
WORKS INVOLVED IN HV SYSTEM- COMMERCIAL RING
- Repair & renovation of 2 Nos. 11 KV, 1000 KW generators/ Aromatic panel/ priming
system/ engine sensors/ Neutral Earthing Resistors/ new HV protection for alternator/
new AVAR’s & control system.
- Supply installation testing & commissioning of 8 Nos. new sub-stations, involving 12 Nos.
11/0.415 KV transformers/ 63 No. SF6 circuit Breaker panels/ Earthing/ HV-LV-control
termination’s/ DC system/ Remote Monitoring Control System-RCMS for commercial ring/
- UG HV & J-Bus cabling/ 15 Scenarios for normal & emergency operation of Airport with
backup power.
- Removal of 12 Nos. PCB transformers environmental Hazardous material.
IMPARTED ON SITE TRAINING TO AIRPORT STAFF- TO OPPERATE SUB-STATIONS
- Emergency, Normal & Remote control operations.
- Setting of SEPAM 2000-1000 for protection/ measurement.
- Preventative & breakdown maintenance of HV switchgear panels.
5/7
- Consultancy for Housing Complex for Indian Oil Corporation, Allahabad –consisting of
Housing Complex with Shopping Centre, Schools, Theatre, Canteen, Sports facilities,
Amusement Facilities, Public Toilets, Pump House, Substations, Water Filtration Plant,
Swimming Pools, Administrative Buildings, Street Lighting, Special Lighting & Sound
Effects, Oil Depots, Tank Farm Areas, Oil Terminals. Third Party Inspection for Clients at
manufacturing works & sites on HT/LT Equipments specified in the contract.
- Preparation of Tender and Contract Documents, O & M manuals, materials for break
down maintenance, co-ordination with other contractors, cost estimation, PERT charts
through PC environment for IOC & other clients.
- Consultancy on Turn Key Project for TATA Vasisti Detergent Ltd. (TVDL)- Bombay;
Manufacturers of Liquid, Powder and Fatty Acid Soap turn key Plants. Project included
33kV Substations, distribution networks, Power & control for machinery used in various
plants, design of controls & control panels as per client’s requirements & co-ordination of
relaying systems etc.
Company : SINGH & ASSOCIATES (Consultants for Steel & Rolling Mills – INDIA )
Position Held : Senior Project Engineer
Period : 1988 to 1989
Project : Steel Mills and Rolling Mills – India/ Uganda
Job description :
Responsible for complete design of electrical system associated with steel and rolling
mills in India and Uganda. Design included 220kV substations, 100/80/60 MVA Power &
Furnace transformers, selection of AC/DC motors, MCC’s and all electrical equipment
for entire steel mill, 90MVAr Power factor compensator, selection of 60/30/15 Ton EOT
cranes for melting and scrap bays. Interior and exterior lighting, lightning protection,
cable sizing, system short circuit and earthing calculations.
6/7
- Lighting and power distribution system for parking, sports, monuments, mosques and
roadways
- Collection of field data, selection, sizing and approval of electrical equipment with price
estimation, system design, discussions with Client/Contractor/Supply authorities.
- Design of GOSP, water injection, pump room flare area, compressor area, control room,
SCADA equipment etc. all related to Abqaiq and Rasturanura refinery Saudi Arabia.
- Overhead and underground network involving 13.8kV system for Yanbu and Jubail City.
- Cathodic Protection and SCADA system for refinery at Rastaunura, Abqaiq and GOSPs
- Engaged in preparation of design, specifications and contract documents for various
projects.
- Preparation of Bid documents, B.O.Q. special materials including long delivery item lists
for classified areas.
- Design and supervision Oil Rig drill bits manufacturing factory in Damman, S.A.
- Design, evaluation, supervision of high rise administration buildings for Saudi Arabian
Fertiliser Co. (SAFCO)
- Design, modification of internal substations for Al Kuhaimi Metal industries Dammam,
under Ministry of Industries and Electricity.
PERSONAL DETAILS
Nationality : Indian
Marital Status : Married
Passport No. : Z1920737 valid till 2019
Visa status : Employment, valid till 21 Dec. 2013
Languages Known : English & Hindi
Driving License : Holding valid U.A.E. Driving License (462511/A till 2014)
Certificates
- Baker Hughes- Customer ESP technology, applications & GCS basics- 4 days course.
- International Marine Contractors Association (IMCA)- Inspection & Maintenance of
Electrical equipment installed in Hazardous Environments- 3 days course.
- Rotating Equipment Reliability Optimization Workshop Training by US Co. & author
Mr. W.E. Forsthoffer - 5 days course
7/7