Professional Documents
Culture Documents
FCC Statement
The FCC (Federal Communications Commission) restricts
the amount of radio frequency emission and radiation coming
from computer equipment.
The equipment introduced in this manual has been tested
and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user is required
to correct the interference at his/her own expense.
Any changes or modifications not expressly approved by the
manufacture would void the user’s authority to operate the
equipment.
Trademarks
User’s Manual 1
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 1/55
7/24/2019 EtherWAN EX1616W User Manual
Preface
This manualEthernet
Web-Smart describesSwitch.
how toThe
install
TX and
portsuse
of the
the 16-Port
switch
introduced here auto-negotiates the presence of 10/100Mbps
and full/half-duplex mode and auto-MDIX. In addition, it
allows an optional 100Base-FX multi-mode/single-mode or
100Base-BX WDM single-mode fiber module, enabling long
distance connection.
2 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 2/55
7/24/2019 EtherWAN EX1616W User Manual
Table of Contents
FCC STATEMENT 1
TRADEMARKS 1
PREFACE 2
TABLE OF CONTENTS 3
PRODUCT OVERVIEW 5
FRONT VIEW 5
P ACKAGE CONTENTS 5
PRODUCT FEATURES 6
FRONT P ANEL DISPLAY
7
PHYSICAL PORTS 8
Understanding Front Panel Design 8
INSTALLATION 9
User’s Manual 3
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 3/55
7/24/2019 EtherWAN EX1616W User Manual
VLAN
21
Trunking
22
QoS Mode
23
QoS Priority
24
Load Default
25
Update Firmware 26
TECHNICAL SPECIFICATIONS 27
4 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 4/55
7/24/2019 EtherWAN EX1616W User Manual
Product Overview
Front View
Package Contents
damage
reseller. or missing items immediately to your authorized
User’s Manual 5
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 5/55
7/24/2019 EtherWAN EX1616W User Manual
Product Features
♦ PROVIDES
16 × 10/100MBPS PORTS USING RJ-45
CONNECTORS
♦ AN OPTIONAL SINGLE-PORT FIBER MODULE ALLOWS:
- 100B ASE-FX MULTI - MODE FIBER WITH SC, ST, MT-RJ, VF-45 OR LC
CONNECTOR
- 100B ASE-FX SINGLE- MODE FIBER WITH SC OR ST CONNECTOR
100B ASE-BX WDM SINGLE- MODE FIBER WITH SC CONNECTOR
♦ -AUTO-NEGOTIATION FOR SPEED AND DUPLEX MODE ON TX
PORTS
♦ AUTO-MDIX FOR ALL TX PORTS
♦ 4096 MAC ADDRESSES, 1.5M BITS BUFFER MEMORY
♦ STORE-AND-FORWARD MECHANISM
♦
TRUE NON BLOCKING ARCHITECTURE
♦ FULL WIRE-SPEED FORWARDING RATE
♦ BROADCAST STORM FILTERING CONTROL
♦ BACK-PRESSURE AND IEEE 802.3X COMPLIANT FLOW
CONTROL
♦ SYSTEM, IP ADDRESS, PORT, VLAN, TRUNKING, QOS MODE,
6 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 6/55
7/24/2019 EtherWAN EX1616W User Manual
Power
This LED comes on when the switch is properly connected to power and
turned on.
Port Status
The RJ-45 ports are numbered from 1 to 16 on the 16-Port Switch.
The
eachLEDs are located
respective on therefer
port. Please fronttopanel of the
the table switch,
below displaying
for more status for
information.
Before you use this table for troubleshooting, make sure the switch is
properly connected to power and turned on.
User’s Manual 7
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 7/55
7/24/2019 EtherWAN EX1616W User Manual
Physical Ports
U NDERSTANDING F RONT P ANEL D ESIGN
8 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 8/55
7/24/2019 EtherWAN EX1616W User Manual
Installation
As with any electric device, you should place the equipment
where it will not be subjected to extreme temperatures,
humidity, or electromagnetic interference. Specifically, the
site you select should meet the following requirements:
User’s Manual 9
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 9/55
7/24/2019 EtherWAN EX1616W User Manual
Step 4: Align the brackets to the side holes on the rack and use rack
screws to secure the chassis with the rack.
10 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 10/55
7/24/2019 EtherWAN EX1616W User Manual
Step 1: Make sure the power is switched off. The module is not hot-
swappable.
It may cause electric shock or any possible damage to the switch if the
power is not switched off.
Step 5: Carefully slide the module into the slot, following the internal
plastic guide rails.
Step 6: Once it is fully slid in, snap in the module to make a proper
connection.
User’s Manual 11
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 11/55
7/24/2019 EtherWAN EX1616W User Manual
Connecting to Power
Step 1: Connect the AC power cord to the receptacle at the back of the
switch.
Step 2: Attach the plug into a standard AC outlet with a voltage range from
100~240VAC.
Step 3: The power LED on the front panel will then illuminate.
C ABLING
Step 1: First, ensure the power of the switch (and end devices) is turned
off.
It may cause an electric shock or any possible harm to you if the power
is not switched off.
Step 2: Prepare cable with corresponding connectors for each type of port
in use.
(Consult the table below for cabling requirements based on
connectors and speed considerations.)
Step 3: Connect one end of the cable to the switch and the other end to a
desired device.
Step 4: Once the connections between two end devices are made
12 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 12/55
7/24/2019 EtherWAN EX1616W User Manual
N ETWORK S EGMENTATION
The maximum segment distance between a node and a
directly connected switch port on a 100Base-FX network is
100km using 10/125 (or 9/125) µm single-mode fiber optic
cable. It is capable of a maximum span of 2km when
62.5/125 (or 50/125) µm multi-mode fiber optic cable is used.
User’s Manual 13
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 13/55
7/24/2019 EtherWAN EX1616W User Manual
Switch Configuration
SWITCH IP A DDRESS
In your web browser, specify the default IP address of the
Ethernet Switch (192.168.1.10).
14 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 14/55
7/24/2019 EtherWAN EX1616W User Manual
U SER N AME
Enter the factory default User Name: admin.
P ASSWORD
Enter the factory default password (no password, press
<Enter> directly).
Otherwise, enter a user-defined password if you follow the
instructions later and change the factory default password.
User’s Manual 15
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 15/55
7/24/2019 EtherWAN EX1616W User Manual
16 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 16/55
7/24/2019 EtherWAN EX1616W User Manual
Main Menu
SYSTEM
User’s Manual 17
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 17/55
7/24/2019 EtherWAN EX1616W User Manual
18 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 18/55
7/24/2019 EtherWAN EX1616W User Manual
IP A DDRESS
The IP Address parameters can be displayed by clicking the
IP Address selection in the left sub-menu.
User’s Manual 19
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 19/55
7/24/2019 EtherWAN EX1616W User Manual
PORT
The Port parameters can be displayed by clicking the Port
selection in the left sub-menu.
20 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 20/55
7/24/2019 EtherWAN EX1616W User Manual
VLAN
The VLAN parameters can be displayed by clicking the
VLAN selection in the left sub-menu.
T RUNKING
The Trunking parameters can be displayed by clicking the
Trunking selection in the left sub-menu.
22 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 22/55
7/24/2019 EtherWAN EX1616W User Manual
QOS M ODE
The QoS Mode parameters can be displayed by clicking the
QoS Mode selection in the left sub-menu.
User’s Manual 23
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 23/55
7/24/2019 EtherWAN EX1616W User Manual
QOS P RIORITY
The QoS Priority parameters can be displayed by clicking
the QoS Priority selection in the left sub-menu.
24 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 24/55
7/24/2019 EtherWAN EX1616W User Manual
LOAD D EFAULT
The Load Default parameters can be displayed by clicking
the Load Default selection in the left sub-menu.
User’s Manual 25
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 25/55
7/24/2019 EtherWAN EX1616W User Manual
U PDATE F IRMWARE
The Update Firmware parameters can be displayed by
clicking the Update Firmware selection in the left sub-menu.
26 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 26/55
7/24/2019 EtherWAN EX1616W User Manual
Technical Specifications
FX port:
Link/ACT (1 LED)
User’s Manual 27
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 27/55
7/24/2019 EtherWAN EX1616W User Manual
Physical Specifications
28 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 28/55
7/24/2019 EtherWAN EX1616W User Manual
Connector Pinouts
Pin arrangement of RJ-45 connectors:
Connector Pin-Out
Pin Regular Ports Uplink port
1 Output Transmit Data + Input Receive Data +
User’s Manual 29
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 29/55
7/24/2019 EtherWAN EX1616W User Manual
Ordering Information
i.
ii. The
MMFmaximum node-to-node
denotes Multi-Mode network
Fiber. distance
SMF denotes is in full-duplex
Single-Mode operation.
Fiber.
30 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 30/55
7/24/2019 EtherWAN EX1616W User Manual
FCC Statement
The FCC (Federal Communications Commission) restricts
the amount of radio frequency emission and radiation coming
from computer equipment.
The equipment introduced in this manual has been tested
and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user is required
to correct the interference at his/her own expense.
Any changes or modifications not expressly approved by the
manufacture would void the user’s authority to operate the
equipment.
Trademarks
User’s Manual 1
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 31/55
7/24/2019 EtherWAN EX1616W User Manual
Preface
This
Smartmanual
Ethernetdescribes howTX
Switch. The to ports
installofand use theintroduced
the switch 24-Port Web-
here
auto-negotiates the presence of 10/100Mbps and full/half-duplex
mode and auto-MDIX. In addition, it allows an optional 100Base-
FX multi-mode or single-mode fiber module, enabling long
distance connection.
•
Installation instructions
Specifications
2 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 32/55
7/24/2019 EtherWAN EX1616W User Manual
Table of Contents
FCC STATEMENT 1
TRADEMARKS 1
PREFACE 2
TABLE OF CONTENTS 3
PRODUCT OVERVIEW 5
FRONT VIEW 5
P ACKAGE CONTENTS 5
PRODUCT FEATURES 6
FRONT P ANEL DISPLAY 7
PHYSICAL PORTS 8
Understanding Front Panel Design 8
INSTALLATION 9
Port
17
VLAN
18
Trunking
19
Save Configuration
20
Load Default
21
4 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 34/55
7/24/2019 EtherWAN EX1616W User Manual
Product Overview
Front View
Package Contents
When you unpack the product package, you shall find these items
listed below.
The 24-Port Switch
One AC power cord
User’s Manual
User’s Manual 5
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 35/55
7/24/2019 EtherWAN EX1616W User Manual
Product Features
♦ PROVIDES
24 × 10/100MBPS PORTS USING RJ-45
CONNECTORS
♦ AN OPTIONAL SINGLE-PORT FIBER MODULE ALLOWS:
- 100B ASE-FX MULTI - MODE FIBER WITH SC, ST, MT-RJ, VF-45 OR LC
CONNECTOR
- 100B ASE-FX SINGLE- MODE FIBER WITH SC CONNECTOR
♦ AUTO-NEGOTIATION FOR SPEED AND DUPLEX MODE ON TX
PORTS
♦ 8192 MAC ADDRESSES, 1.5M BITS BUFFER MEMORY
♦ AUTO-MDIX FOR ALL TX PORTS
♦ STORE-AND-FORWARD MECHANISM
♦ TRUE NON-BLOCKING ARCHITECTURE
♦ FULL WIRE SPEED FORWARDING RATE
♦ BROADCAST STORM FILTERING CONTROL
♦ BACK-PRESSURE AND IEEE 802.3X COMPLIANT FLOW
CONTROL
♦ SYSTEM, IP CONFIGURATION, PORT, PORT-BASED VLAN,
AND PORT-BASED TRUNKING SETTING THROUGH THE WEB-
BASED CONSOLE PORT.
♦ FRONT PANEL PUSH BUTTON TO CHOOSE 100BASE-FX OR
PORT 24
♦ PRESS THE FRONT PANEL IP RESET PUSH BUTTON FOR FIVE
SECONDS TO RESET THE ETHERNET SWITCH BACK TO THE
DEFAULT IP ADDRESS. (THE PORT, VLAN, AND TRUNKING
SETTINGS WILL REMAIN THE SAME AS WHEN THEY WERE LAST
SAVED).
♦ FRONT PANEL PORT AND POWER STATUS LEDS
♦ STANDARD 19” RACKMOUNT SIZE, ONE-UNIT IN HEIGHT
6 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 36/55
7/24/2019 EtherWAN EX1616W User Manual
The LED indicators on the front panel provide you with instant
feedback on each port status, and help you monitor and
troubleshoot the switch.
Power
This LED comes on when the switch is properly connected to power and
turned on.
Push Button
The push button is located at the right side of port 24 on the 24-Port Switch.
Depress this button to use twisted pair port 24, and press this button to use
the 100Base-FX module.
The LEDs are located on the ports of the switch, displaying status for each
respective port. Please refer to the table below for more information.
Before you use this table for troubleshooting, make sure the switch is
properly connected to power and turned on.
User’s Manual 7
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 37/55
7/24/2019 EtherWAN EX1616W User Manual
Physical Ports
U
NDERSTANDING F
RONT P ANEL D ESIGN
Console
Port LED LNK On A valid network connection
LNK stands for LINK
Off No connection
ACT Flashing Transmitting or receiving data
ACT stands for ACTIVITY
Off Neither transmitting nor receiving
data
Off Neither
data transmitting nor receiving
8 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 38/55
7/24/2019 EtherWAN EX1616W User Manual
Installation
As with any electric device, you should place the equipment where
it will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you select
should meet the following requirements:
User’s Manual 9
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 39/55
7/24/2019 EtherWAN EX1616W User Manual
Step 4: Align the brackets to the side holes on the rack and use rack
screws to secure the chassis with the rack.
The switch can sit on desktop or any flat surface with adequate
space and ventilation. If you want to place it onto a shelf, make
sure the shelf can withstand the weight of the switch.
10 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 40/55
7/24/2019 EtherWAN EX1616W User Manual
Step 1: Make sure the power is switched off. The module is not hot-
swappable.
It may cause electric shock or any possible damage to the switch if the
power is not switched off.
Step 5: Carefully slide the module into the slot, following the internal
plastic guide rails.
Step 6: Once it is fully slid in, snap in the module to make a proper
connection.
User’s Manual 11
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 41/55
7/24/2019 EtherWAN EX1616W User Manual
Connecting to Power
Step 1: Connect the AC power cord to the receptacle at the back of the
switch.
Step 2: Attach the plug into a standard AC outlet with a voltage range from
100~240VAC.
Step 3: The power LED on the front panel will then illuminate.
C ABLING
Step 1: First, ensure the power of the switch (and end devices) is turned
off.
It may cause an electric shock or any possible harm to you if the
power is not switched off.
Step 2: Prepare cable with corresponding connectors for each type of port
in use.
(Consult the table below for cabling requirements based on
connectors and speed considerations.)
Step 3: Connect one end of the cable to the switch and the other end to a
desired device.
Step 4: Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.
12 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 42/55
7/24/2019 EtherWAN EX1616W User Manual
N
ETWORK S EGMENTATION
User’s Manual 13
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 43/55
7/24/2019 EtherWAN EX1616W User Manual
Switch Configuration
SWITCH IP A DDRESS
U SER N
AME
P ASSWORD
14 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 44/55
7/24/2019 EtherWAN EX1616W User Manual
Main Menu
SYSTEM C HANGE
User’s Manual 15
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 45/55
7/24/2019 EtherWAN EX1616W User Manual
IP CONFIGURATION
16 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 46/55
7/24/2019 EtherWAN EX1616W User Manual
PORT
transmit / receive
Apply: Click the of the ports.
Apply button and apply the new
settings of the ports.
User’s Manual 17
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 47/55
7/24/2019 EtherWAN EX1616W User Manual
VLAN
18 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 48/55
7/24/2019 EtherWAN EX1616W User Manual
T
RUNKING
User’s Manual 19
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 49/55
7/24/2019 EtherWAN EX1616W User Manual
S AVE CONFIGURATION
20 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 50/55
7/24/2019 EtherWAN EX1616W User Manual
LOAD D EFAULT
User’s Manual 21
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 51/55
7/24/2019 EtherWAN EX1616W User Manual
Technical Specifications
22 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 52/55
7/24/2019 EtherWAN EX1616W User Manual
Physical Specifications
User’s Manual 23
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 53/55
7/24/2019 EtherWAN EX1616W User Manual
Connector Pinouts
Pin arrangement of RJ-45 connectors:
Connector Pin-Out
Pin Regular Ports Uplink port
1 Output Transmit Data + Input Receive Data +
24 User’s Manual
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 54/55
7/24/2019 EtherWAN EX1616W User Manual
Ordering Information
i.
ii. The
MMFmaximum node-to-node
denotes Multi-Mode network
Fiber. distance
SMF denotes is in full-duplex
Single-Mode operation.
Fiber.
http://slidepdf.com/reader/full/etherwan-ex1616w-user-manual 55/55