You are on page 1of 2

Sspc pa 1 pdf

SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel. 1 Surface preparation and application of a coating system on structural steel.

sspc pa 11
To determine acceptability of coating thickness according to SSPC-PA 2 shall be.TABLE 1-1 PAINT AND COATING SYSTEMS FOR
INDUSTRIAL SERVICE FOR.

sspc pa 1 standards
SSPC - PA1 - Shop, Field and Maintenance Painting.SSPC-PA 2 - Measurement of Dry Paint.

SSPC-SP5 NACE 1 White Metal Blast Cleaning.


Type 1 - Magnetic Pull-Off. Each additional 1000 sq ft test one random 100 sq ft area.SSPC-PA 1April 1, 2000 Editorial Revisions November
1, 2004 SSPC: The Society for Protective Coatings PAINT APPLICATION SPECIFICATION NO. 1, 14 стр.SSPC-PA 2 Measurement of
Dry Coating Thickness with Magnetic Gages The Society for Protective Coatings.

sspc-pa 1 pdf
2 DESCRIPTION OF GAGES: 2. 1 Gage Types: The gage type is. SSPC - PA1-00 - Shop, Field and Maintenance Painting of Steel. SSPC -
VIS1-89 - Visual Standard for Abrasive Blast Cleaned Steel.SSPC-PA 14. SSPC: The Society for Protective Coatings.

sspc-pa 15
Application of Thick Film Polyurea and.September 1, 2000. This SSPC: The Society for Protective.

sspc pa 10
SSPC-SP 15, Commercial Grade Power Tool Cleaning.

SSPC - PA1 - Shop, Field and Maintenance Painting.


SSPC-QP 1, Evaluating Qualifications of IndustrialMarine Painting.for Protective Coatings SSPC and the National Association of Corrosion
Engineers International. SSPC-SP5 NACE 1 White Metal Blast Cleaning.

sspc pa 14
SSPC: The Society tor Protective Coatings. 40 24th Street, 6th Floor.

sspc-pa-1-64
Pittsburgh, PA 152224656.Describe the purpose and content of SSPC-PA 2.

sspc pa 17
Describe the differences between Type 1 and Type 2 gages. Describe the processes associated with.SSPC-SP 11. Editorial Revisions November
1, 2004. 1 This standard covers the requirements for power tool cleaning to produce.in accordance to SSPC-SP 1 and SSPC-SP 2 or SSPC-SP
3. Use SSPC-SP 7 NACE 4 to expedite the preparation of large areas.SSPC-SP-1.

sspc pa 1
Any major surface defects, particularly surface laminations or scabs detrimental to the protective coating system, shall be removed by suitable.

sspc pa 1 free download


SSPC-SP WJ-1NACE WJ-1, Clean to Bare Substrate. SSPC-SP WJ-2NACE WJ-2, Very Thorough Cleaning. SSPC-SP WJ-3NACE WJ-
3.Following the guidelines in SSPC-PA 2, 1. 10 DFT readings were taken for each pipe segment lining, which included readings at various
circumferential points.Recommended surface preparation commercial blast per SSPC-SP 6. Mix Ratio by Volume: 1: 1 ADS573 or
ADS572:ADS574.

You might also like