Professional Documents
Culture Documents
G Group 8 Turning Joint: 1. Removal and Install
G Group 8 Turning Joint: 1. Removal and Install
2) INSTALL
(1) Carry out installation in the reverse order
to removal. 1
ö Take care of turning joint direction.
ö Assemble hoses to their original positions.
ö Confirm the hydraulic oil level and check
2
the hydraulic oil leak or not.
21078DA08
8-115
2. DISASSEMBLY AND ASSEMBLY
1) STRUCTURE
14 3
15
10 6
12 4
5
11
11
9
8
21078DA09
8-116
2) DISASSEMBLY
14
ö Before the disassembly, clean the turning 15
joint.
3
(1) Remove bolts(14), washer(15) and
cover(3).
21078DA10
21078DA11
11
9
1
21078DA12
8-117
3) ASSEMBLY
ö Clean all parts.
ö As a general rule, replace oil seals and O-
ring.
ö Coat the sliding surfaces of all parts with
engine oil or grease before installing.
11
9
1
21078DA12
21078DA13
21078DA11
8-118
(7) Install cover(3) to body(1) and tighten
bolts(14). 14
ÂTorque : 10~12.5kgfÂm(72.3~90.4lbfÂft) 15
21078DA10
8-119