Professional Documents
Culture Documents
Cabinet Types and Their Installation PDF
Cabinet Types and Their Installation PDF
1
From Integrated Equipment Engineering Dept.,
Liu Changlin and Deng Shunqing
B style cabinet
¾ B style cabinet can be a welded or assembled cabinet.
¾ Assembled B style cabinet consists of a rack, front and
rear doors (both have a left leaf and right leaf), side
panels, and a top cover. The rear door is same as the
front door.
¾ Rack is assembled from upper enclosure frame, lower
enclosure frame, front column and rear column with
4
bolts.
¾ Outer dimensions of the cabinet are 800 (W) X 550 (D) X
2100 (H). When cabinet is equipped with side doors, its
width is 880.
B style cabinet
¾ N610 cabinet falls into two categories: N610-22 cabinet and N610-18
cabinet.
¾ N610 cabinet generally adopts the N series pattern of dense-hole
door, or the N series pattern of convex-rib front door.
¾ N610 cabinet consists of a rack, front and rear doors ((both have a
left leaf and right leaf) and side panels. The rear door is same as the
front door.
¾ Rack is assembled from sheet-metal enclosure frames and sheet-
metal columns.
¾ Porosity of the front door is 31% or 50%, whichever is applicable to
the product requirement for ventilation and heat dissipation.
¾ Outer dimensions of N610-22 cabinet are 600 (W) X 1000 (D) X 2200 5
(H).
¾ Outer dimensions of N610-18 cabinet are 600 (W) X 1000 (D) X 1800
(H).
¾ N610 cabinet complies with 19” standard of IEC297, and mainly
applies to A&S and Datacom product lines.
N610-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 5
Introduction to Cabinets --N68 cabinet
¾ N68 cabinet falls into two categories: N68-22 cabinet and N68-18
cabinet.
¾ N68 cabinet adopts the N series cabinet pattern, which uses
convex-rib front door.
¾ N68 cabinet consists of a rack, front and rear doors (both have a
left leaf and right leaf) and side panels. The rear door is same as the
front door.
¾ Rack is assembled from sheet-metal enclosure frames and sheet-
metal columns.
¾ There are multiple types of N68 rack, for example, service rack,
server rack, UMG rack and SG rack.
¾ Outer dimensions of the N68-22 cabinet are 600 (W) X 800 (D) X 6
2200 (H).
¾ Outer dimensions of the N68-18 cabinet are 600 (W) X 800 (D) X
1800 (H).
¾ N68 cabinet complies with 19” standard of IEC297, and mainly
applies to NGN, Core Network and Datacom product lines.
N68-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 6
Introduction to Cabinets --N66 cabinet
N66-22 cabinet
H66-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 9
Introduction to Cabinets --T66 cabinet
T66-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 10
Introduction to Cabinets --T63 cabinet
T63-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 11
Introduction to Cabinets --T63B cabinet
T63B-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 12
Introduction to Cabinets --B63B cabinet
B63B-22 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 13
Introduction to Cabinets --B63 cabinet
BTS3606 cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 16
Introduction to Cabinets --BTS3812E cabinet
BTS3812E cabinet
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 17
Introduction to Cabinets --BTS3006A cabinet
BTS3006A cabinet
BTS3606A cabinet
BTS3812A cabinet
BTS3002C cabinet
BTS3601C cabinet
BTS3801C cabinet
BTS3802C cabinet
27
Outdoor
environment
28
29
Installation Applicable
No. Applicable installation environment Remarks
form cabinet
Installation on B style, N610
1 Indoor cement floor
cement floor N68, N66,N63
Equipment H66, T66, T63
Indoor cabinet
Support room T63B, B63B
2 Indoor antistatic floor B68-21, BTS3606
Installation
BTS3812E, BTS3812
Installation on BTS3006A, BTS3012A
3 Outdoor cement platform Outdoor cabinet
mounting set BTS3606A, BTS3812A
Installation on
4 Steel post (60 mm -114 mm) Roof, floor 30
pole Micro BTS or RRU3801C, BTS3002C
or platform
5 Wall mounting Wall surface other small BTS3601C, BTS3801C
Installation on equipment BTS3802C
6 Stand
stand
Typically, platform cabinets and BTS cabinets are installed on cement floor.
We take one cabinet of each type for example to introduce the installation
method.
31
32
33
34
(1) Lower frame (2) Expansion bolt M12¯60 (3) Spring washer 12 (4) Plain washer
(5) Insulation covering (6) Fixing bolts for upper and lower frames (7) Leveling pad (8) Insulation plate
35
(1) Cabinet (2) Fixing bolt for upper and lower frames (3) Panel (4) Screw assembly M6¯20
Cabinet
No. Support Cabinet Status Remarks
type
1 A600 BTS30/312/3606/3612/3806/3812/3812E 9 Used on a large scale Borrowed for nine types of cabinet
2 P550 Assembled B style cabinet 1 Used on a large scale
3 P800 B68-21 service cabinet/server cabinet 2 Seldom used To be replaced by N68 cabinet gradually
4 P1000 B610-21 cabinet 1 Seldom used To be replaced by N610 cabinet gradually
5 N300 N63 cabinet 1 Used on a large scale
6 N800 N68 service cabinet/server cabinet 2 Used on a large scale Borrowed for two types of cabinet 36
7 N1000 N610 cabinet 1 Used on a large scale
8 S300A T63, T63B, B63, B63B 5 Used on a large scale Borrowed for five types of cabinet
9 S600A T66, H66, N66 4 Used on a large scale Borrowed for four types of cabinet
Introduction to support
I. Installation of A600 support for BTS3812E cabinet
II. Installation of P550 support for C&C08 cabinet
III. Installation of P800 support for B68-21 cabinet
IV. Installation of N300 support for N63 cabinet
V. Installation of N800 support for N68 cabinet
VI. Installation of S300A support for T63 cabinet
VII. Installation of S600A support for T66 cabinet 37
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
38
I 195-230
II 231-300
III 301-445
39
Customized according to floor
IV height
(minimum height is 120 mm)
(1) Connecting hole (2)Upper bracket (3)Lower bracket (4) Installation hole
Step 1: Draw lines and make holes on the antistatic floor, and connect
connecting holes of the support to those of the antistatic floor.
40
Step 2: Put the antistatic floor connected with support at the original place so
as to align the support. Fix the support.
41
42
43
(1) Bolt M12x30 (2) Spring washer Φ12 (3) Plain washer Φ12
(4) Panel (5) Combination bolt M6X20
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
44
45
Insulating plate
48
Foot
Plain washer
Spring washer
Bolt M16¯35
Rack
49
12
1 Square nut 2 Fixed angle plate 3 Plain washer 12
1
2 11 50
3
4
5
10
9
8
7
6
2
3
4
1
51
Bolt
M12¯20
Washer
52
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
53
710
2
11
10
9
1
2
3
4
8 55
5
7 6
2
3
1
1 4
6 5
2
56
2
3
4
1
57
Bolt
M12¯20
Washer
58
59
1
2
7
4
60
5
4
5
61
7 6
1 Fixed angle plate 2 Insulation plate 3 Movable angle plate 4 Spring washer 8
5 Bolt M8¯30 6 Big plain washer 8 7 Insulation covering
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
62
1 Upper bracket 2 Lower bracket 3Hole for connecting cabinet 4 Hole for installation to floor
5 Height marker of antistatic floor 6 Height-locking bolt 7 Connecting hole on front holder 8 Connecting hole on side holder
64
65
1 Cabinet 2 Support
3 Bolt M12¯35 4 Spring washer 12
5 Big plain washer 6 Insulation washer
7 Insulating plate 8 Leveling pad
66
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
67
1 Upper bracket 2 Height marker of antistatic floor 3 Lower bracket 4 Hole for connecting guide rail 5 Hole for installation to floor
1
B
5 69
4
5
6
3 70
5 1
7 2
8 71
9 3
2
3
7 9
6 6
5 5
4 4
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 72
Support Installation --Install N800 support
Effect drawing of cabinet installed on antistatic floor
73
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
74
II 236-355
75
III 356-595
Customized according to
IV floor height (minimum
height is 100 mm)
3
1. Hole for connecting 2. Height marker of antistatic floor 3. Hole for installation to
cabinet floor
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 75
Support Installation --Install S300A support
Step 1: Draw lines and make holes. Then, fix the support
1 2
3
4
5
6
7 76
8
1. Height marker of antistatic floor 2. Height-locking bolt (middle) 3. Height-locking bolt (both sides)
4. Bolt M12×60 5. Spring washer 12 6. Big plain washer 12
7. Expansion tube 8. Expansion nut
1
2
3
4
5
9 77
8
1. Bolt M12×40 2. Spring washer 12 3. Big plain washer12 4. Insulation covering 5. Lower enclosure frame of cabinet
6. Insulating pad 7. Cabinet-fixing hole 8. Support 9. Leveling pad
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 77
Support Installation --Install S300A support
Step 3: Install floor holders
1
7
6
5 2
4
3
78
Introduction to support
¾Installation of A600 support for BTS3812E cabinet
¾Installation of P550 support for C&C08 cabinet
¾Installation of P800 support for B68-21 cabinet
¾Installation of N300 support for N63 cabinet
¾Installation of N800 support for N68 cabinet
¾Installation of S300A support for T63 cabinet
¾Installation of S600A support for T66 cabinet
79
III 346-525 80
Customized according to
IV floor height (minimum height
4 is 100 mm)
(1) Upper bracket (2) Height marker of antistatic floor (3) Lower bracket
(4) Hole for installation to floor (5) Hole for connecting guide rail
81
82
7
83
4
3
6 4
7 5
1 Guide rail 2 Support 3 Fixing piece for side holder 4 Plain washer12
5 Spring washer 12 6 Bolt M12¯30 7 Fixing piece for front holder
Guide rail
Support
5
5 Insulation plate 6 Leveling pad 85
7 Guide rail 8 Plain washer 12
6
9 Nut M12
7
8
9
6
7
6
4
5
8
4
9
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 86
Support Installation --Install S600A support
Effect drawing of S600A support installation
2
87
88
89
(1) Cement foundation (2) Mounting set (3) Cabinet (4) Leveling pad
90
(1) Cement foundation (2) Mounting set (3) Cabinet (4) Leveling pad (1) Cabinet (2) Mounting set (3) Cement foundation
(5) Plain washer 12 (6) Spring washer 12 (7) Bolt M12¯35 (4) Bolt M12¯35 (6) Spring washer 12 (5) Plain washer 12
91
92
Fix a pair of fasteners to backplane Connect two pairs of fasteners to fix the pole
(1) (2)
(1)
(2)
(3)
(4)
93
(1) Fastener (2) Backplane (3) Plain washer10 (1) Fastener (2) Plain washer10 (3) Spring washer 10
(4) Spring washer 10 (5) M10¯45Bolt (4) M10 bolt
(1)
(1)
(3)
(2)
(2)
(3)
94
(4)
(1) Hanging plate (2) M6¯12 bolt (1) Hooker on hanging plate (2) RRU3801C module
(3) Hooker (4) RRU3801C module (3) Installation slot on backplane
(3)
(2)
95
(1)
(1) M6X12 bolt (1) Hooker of shell (2) Shell of a single RRU (3) Hole of hanging plate
Fix the plastic shell of RRU3801C Repeat the steps above to install another RRU
96
(1)
Fix backplane to wall with expansion bolts Install RRU3801C to the backplane, as is done in
installation on pole
(1)
(2)
(1)
(3)
(3)
(4)
(5)
97
(2)
(1) Expansion bolt (2) Backplane (3) M8 nut (1) Hooker on hanging plate (2) RRU3801C module
(4) M8 spring washer (5) M8 plain washer (3) Installation slot on backplane
(1)
(2)
(3)
(4)
(5)
(4)
(6)
98
(2) (3)
(7)
(1)
(1) Stand (2) M12Bolt (3) Plain washer12 (1) Backplane for installing RRU3801C (2) Plain washer10
(4) Spring washer 12 (5) Insulation pad (6) Expansion tube (3) Spring washer 10 (4) M10¯45 bolt
(7) Expansion nut
(3) 99
(2)
(3)
100
(2)
(1) Hooker (2) Shell of a single RRU3801C (3) Square hole on hanging plate
Plane washer
Upper bracket
Cabinet
101
102
(1) Angle connecting piece (2) Shockproof bracket (3) Cabinet (4) Channel-section steel
103
104
105
106
Nut M8
Serrated gasket
Bolt M8¯20
Grounding cable
Nut M8
Nut M6
107
Nut M6
108
Bolt M6¯20
Nut M8
Bolt M8¯20
Expansion bolt
M8¯80
Nut M6
Insulating plate
Bolt M6¯20
Spring Big plain Insulation
Nut M8 washer 8 washer 8 pad
109
Nut M6¯20
Bolt M8¯20
Nut M8
110
Nut M6
Bolt M6¯20
Nut M6
Nut M8
Bolt M8¯20
Nut M8 112
Bolt M8¯20
Nut M6
Bolt M6¯20
113
Bolt Nut M6
M6¯20
114
Nut M8 Bolt
M8¯20
Suspension of cabling ladder
HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 114
Installation of Accessories
--Install cabling ladder
Nut M6
Bolt M6¯20
115
Nut M8
Bolt M8¯20
117
Clip for fixing
cabling trough
118