You are on page 1of 1

Vidyamandir Classes : Innovating For Your Success

Date : 03-05-2020 Stoichiometry-I Home Assignment-3

1. What volume of 6M HCl should be added to 2M, 750mL HCl to get 1L of 3M HCl ?
(A) 0.25 L (B) 1.00 L (C) 0.75 L (D) 2.50 L

2. The molarity of 20% by mass H2SO4 solution of density 1.28 g cm–3 is :


(A) 2.56 M (B) 1.56 M (C) 1M (D) 5M

3. The density (in g mL1 ) of a 3.60 M sulphuric acid solution that is 29% H2SO4 by mass will be:

(A) 1.64 (B) 1.88 (C) 1.22 (D) 1.45

4. A molal solution is one that contains 1 mol of a solute in:


(A) 1000 g of solvent (B) 1 L of solvent
(C) 1 L of solution (D) 22.4 L of solution

5. Calculate the molality (m) of 3M solution of NaCl whose density is 1.25g mL–1.
(A) 1.5 m (B) 1.8 m (C) 2.0 m (D) 2.79 m

6. Two glucose solutions are mixed. One has volume of 480 mL and concentration of 1.50 M and the second
has a volume of 520 mL and concentration 1.20 M. The molarity of final solution is:
(A) 1.20 M (B) 1.50 M (C) 1.344 M (D) 2.70 M

7. The equivalent weight of H3PO4 in the reaction is: Ca(OH)2  H3PO4  CaHPO4  2H2O

(A) 49 (B) 98 (C) 32.66 (D) 147

8. Density of water is 1.00 g/cm3 and density of ethanol is 0.9 g/cm3. If these two liquids were mixed to
prepare a dilute solution then :
(A) density of the solution > 1.00 g/cm3 (B) density of the solution < 1.00 g/cm3
(C) density of the solution < 0.9 g/cm3 (D) density of the solution = 1 g/cm3

9. One litre of 0.15 M HCl and one litre of 0.3 M HCl is given. What is the maximum volume of 0.2 M HCl
which one can make from these two solutions. No water is added.
(A) 1.2 L (B) 1.5 L (C) 1.3 L (D) 1.4 L

10. Mole fraction of ethanol in ethanol water mixture is 0.25. Hence, the percentage concentration of ethanol
by weight of mixture is :
(A) 25% (B) 75% (C) 46% (D) 54%

Home Assignment-3 Stoichiometry-I | Chemistry

You might also like