Professional Documents
Culture Documents
1-20XX
April 2019 Draft B1.1 - Unified Inch Screw [Proposed Revision of
ASME B1.1-2003
Threads (R2018)]
Table 2B
Sizes 2” and 2 1/4’’ TYPOGRAPHIC ERROR. If Threads/ In. column is not wide enough, 4.5 rounds to
5. Stress that it is 4.5 for these values.
Change the following values in column 10 to keep consistent with para. 8-3.2f:
5/8-20-3B, change 0.5786 to 0.5787
1”-16-3B, change 0.9409 to 0.9408
1”-20-3B, change 0.9536 to 0.9537
1 5/8-16-3B, change 1.5659 to 1.5658
1 15/16-16-3B, change 1.8785 to 1.8783
2 5/8-16-3B, change 2.5659 to 2.5658
5 1/4 -16-3B, change 5.1909 to 5.1908
5.8.2 Internal Thread
(c) Minor Diameter Tolerance (Internal Threads)
(2) Class 2B UNJ Threads
For threads 13 threads per inch and finer equals, [0.0500 3 √(P)2 + 0.0300P/D] − 0.002 in., within
the following limitations:
(a) Tolerances shall not be greater than 0.259809P25980762P.
(b) Tolerances shall not be less than 0.135315P13531647P.