Professional Documents
Culture Documents
Epson L800 Firmware Update Instructions: Need More Firmware - Welcome To
Epson L800 Firmware Update Instructions: Need More Firmware - Welcome To
com
1. Preparation
- PC (Windows2000/XP/7)
- IPL_USBSender.exe (Tool)
- Update file : FWA965TL.dat
2. Procedures
1) Start the printer in firmware update mode.
(Printer)
- Press Paper, Ink and Power buttons at the same time.
- Contitue pressing them more than 8 seconds.
--> All LEDs light as below.
(PC)
If New hardware detection wizard appears,
Click<Cancel>.
(Printer)
While erasing ROM date, LEDs blink by the following order.
(Printer)
While writing ROM date, LEDs blink by the following order.
(Printer)
While verifying ROM date, all LEDs light as below.
(Printer)
When update is completed, all LEDs blink by 5 cycles per second.
3) Turn off the printer
Turn off the printer by pressing Ink and Paper buttons.
<Caution>
If LEDs blink by the following order, FW has not been updated correctly.
Please try again after turning off the printer by pressing Power button.
(Printer)
- Turn off the printer.
- Hold down Paper button and press Power button to turn on the printer.
- When the printer is turned on, release both buttons.
--> The printer begins to print the nozzle check pattern.