Professional Documents
Culture Documents
1. Identification
Product identifier 1020800720 720 MB + AC
Other means of identification
Product code EL3004777560
Recommended use Not available.
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name HEXPOL Compounding
Address 150 S. Connell Ave
Dyersburg, TN 38024
United States
Telephone SDS Contact 1-731-287-3516
Website www.hexpolcompounding.com
E-mail SDSREQUEST@HEXPOL.COM
Contact person Product Stewardship
Emergency phone number CHEMTREC 1-800-424-9300
2. Hazard(s) identification
Physical hazards Not classified.
Health hazards Not classified.
OSHA defined hazards Not classified.
Label elements
Hazard symbol None.
Signal word None.
Hazard statement The mixture does not meet the criteria for classification.
Precautionary statement
Prevention Observe good industrial hygiene practices.
Response Wash hands after handling.
Storage Store away from incompatible materials.
Disposal Dispose of waste and residues in accordance with local authority requirements.
Hazard(s) not otherwise None known.
classified (HNOC)
Supplemental information 47.42% of the mixture consists of component(s) of unknown acute oral toxicity. 94.1% of the
mixture consists of component(s) of unknown acute dermal toxicity.
Encapsulation in the rubber matrix generally precludes hazardous exposure. However, some
vapors may be released during hot processing, and the fabricator must take the necessary
precautions (mechanical ventilation, respiratory protection, etc.) to protect employees from
exposure. Note that some rubber compounds have the potential to produce nitrosamine fumes
during cure that may be carcinogenic.
Warning! May form combustible dust concentrations in air (during some types of processing, e.g.,
grinding)
3. Composition/information on ingredients
Mixtures
The manufacturer lists no ingredients as hazardous to health according to OSHA 29 CFR 1910.1200.
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
5. Fire-fighting measures
Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Apply extinguishing media
carefully to avoid creating airborne dust.
Unsuitable extinguishing Not available.
media
Specific hazards arising from Explosion hazard: Avoid generating dust; fine dust dispersed in air in sufficient concentrations, and
the chemical in the presence of an ignition source is a potential dust explosion hazard. During fire, gases
hazardous to health may be formed.
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters
Fire fighting Move containers from fire area if you can do so without risk.
equipment/instructions
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards No unusual fire or explosion hazards noted other than possible dust formation.
Use only appropriately classified electrical equipment and powered industrial trucks.
Skin protection
Hand protection Wear appropriate chemical resistant gloves.
Other Wear suitable protective clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene Always observe good personal hygiene measures, such as washing after handling the material
considerations and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
(1) NFPA 654, "Standard for the Prevention of Fire and Dust Explosions from the Manufacturing,
Processing, and Handling of Combustible Solids"
(2) OSHA 3371-08 2009, "Hazard Communication Guidance for Combustible Dusts"
Disclaimer HEXPOL Compounding cannot anticipate all conditions under which this information and its
product, or the products of other manufacturers in combination with its product, may be used. It is
the user’s responsibility to ensure safe conditions for handling, storage and disposal of the
product, and to assume liability for loss, injury, damage or expense due to improper use. The
information in the sheet was written based on the best knowledge and experience currently
available.