Professional Documents
Culture Documents
1141-000-05Y
:
CAUTION:
a. Engine cooling liquid is antifreeze and rust-preventive fluid. Adopt different
℃
freeze points class cooling liquid according to ambient temperature (Adopt -5℃
℃ ~ -35℃
class cooling liquid in normal season, while in winter adopt -25℃ ℃ class
cooling liquid before delivery.). Prohibit using water instead of cooling liquid.
b. When heat the engine, oil level should be between the max. marking and min.
marking on oil dipstick, if the oil level has dropped below the min. marking, should
add engine oil.
5—1
1141-000-05Y
For the details about preheat starting switch, please see No. 29 of Section 3.2.5 in Chapter 3
(3.2.5 Instrument Controls in Operator’s Cab).
2)Select the working speed of superstructure engine
Press PTO switch to select the working speed of superstructure engine.
For the details of PTO switch, please refer to No. 23 of Section 3.2.5 in Chapter 3 (3.2.5
Instrument Controls in Operator’s Cab).
3)After finishing the above-mentioned operation, can operate the superstructure.
5.1.2 Outrigger PTO
Outrigger PTO obtains working pressure oil which is from the chassis engine through drive
gear pump of the gear-box. The steering/outrigger changeover switch can open the pressure
oil circuit of chassis hydraulic system and outrigger motions can be realized by outrigger
control mechanism.
Procedure for operating outrigger PTO:
1) Start chassis engine.
For the details, please refer to Operating Manual for Special purpose Chassis.
2)Press the “power switch of outrigger box” in driver’s cab to make the outrigger control box
electrified.
5—2
1141-000-05Y
5—3