This software update for the Simrad E50xx ECDIS/ECS system includes improvements such as allowing the virtual keyboard to be moved around the screen, improved radar overlay presentation, and compliance with S-64 test standards. It also more accurately reflects the "Lost VDR" warning based on the system configuration. The document provides instructions for downloading the update file from a URL, installing it using a USB drive, and verifying the new software version.
This software update for the Simrad E50xx ECDIS/ECS system includes improvements such as allowing the virtual keyboard to be moved around the screen, improved radar overlay presentation, and compliance with S-64 test standards. It also more accurately reflects the "Lost VDR" warning based on the system configuration. The document provides instructions for downloading the update file from a URL, installing it using a USB drive, and verifying the new software version.
This software update for the Simrad E50xx ECDIS/ECS system includes improvements such as allowing the virtual keyboard to be moved around the screen, improved radar overlay presentation, and compliance with S-64 test standards. It also more accurately reflects the "Lost VDR" warning based on the system configuration. The document provides instructions for downloading the update file from a URL, installing it using a USB drive, and verifying the new software version.
Version: 2.0.1.11498 We are pleased to announce a new software version for the E50xx ECDIS/ECS system. Improvements
The virtual keyboard can be moved around the screen
Improved radar overlay presentation Improved compliance with S-64 test standards The "Lost VDR" warning more accurately reflects the system configuration
Procedure to install new software
Download configuration file from ECDIS to USB
Download FROM http://downloads.navico-commercial.com/software/index.html?r=1388 and store the *.upd file to a USB memory stick. Remove everything from the USB connections on E50xx Insert a USB keyboard and the memory stick containing the *.upd upgrade file. Power cycle the device. When booting you will get a menu asking if you want to upgrade. Use your down arrow key on the keyboard and select "E5000-next-2.0.1.10877-standard- 1.upd" and then press enter. When update is done, system will restart. Don’t press anything before you can see ECDIS running again. Then remove all USB devices. And connect the USB trackball/ mouse again.
To verify software version
Press menu (right top corner)
Press settings Press System Press System information