Professional Documents
Culture Documents
TRANSDUCER SET-UP
HE-7300-Di
HE-1500-Di
1-2. Select transducer from the list, then press MENU key.
1-3. Following display appears. Press MENU key to complete the set-up. You can also press
SET key to return to the transducer list.
2. Set-up Transducer
2-1. Indicate the transducer list.
Go to MENU3 8 INITIALIZE 4 TRANSDUCER SET.
2-2. Select a transducer.
Transducer List Display
3-2. Select OTHER TD to show the display for detailed set-up of transducer.
3-3. Set-up each item on the display. Please refer to the followings for more explanation on
the detailed set-up.
4. Detailed Set-up
Type of Transducer
Select the type of transducer.
Single :
Refer to the following information about each detailed transducer set-up and pin assignment
for each connector.
FREQ. TX
Set the transmitted frequency from transmitter.
Selectable from 27~250kHz.
NOMINAL FREQ.
Set the frequency to be shown on the display.
This value is indicated on the display. Selectable from 20~300kHz.
TRANS TAP
Optimize the matching of transmitter and transducers impedance.
Select A when no selection is shown in Transducer List on the previous menu.
When using 2 transducers, it is necessary to set manually. Refer to the attached Setting List
for Standard Transducer and select the level for each.
Initial set-up : A (Minimum Level)
Higher level set-up (B, C, D) may cause damage on transducer and main unit.