Professional Documents
Culture Documents
ULTRASONIC HUMIDIFIER
1. Digital screen
2. Button
4. Misting plate
5. Front cover
6. Water level
7. Bracket
8. Back cover
9. Back guard
Feature
This unit synthesizes the functions of misting, photo catalysis, ionizer and box fan.
● Model: AMC-88
You can use these functions simultaneously or separately.
● Voltage: 230V 60Hz
Misting function: Through HF vibration (Frequency 1.7 MHz or 2.4MHz, inaudible ● Power: 90W
and no harm to human body) the ceramic misting plate shatters the water molecules, ● Noise:H:52-M43.2-L36.5dB
● N.G.: 6.5KGS
foaming elegant dry mist. There will be no need to heat or put any chemical agent.
● G.W.:8.3KGS
Dry mist can wipe off the formaldehyde, carbon monoxide and bacteria effectively ● Product size: :400*260*800
thus refreshing the air and keeping you healthy. ● Box size: 435*290*860
Negative ion function: Negative ion refreshes the air by bringing down positive ● Capacity:2.5L
● Misting volume: 130ml/h
ions to the ground. Positive ions are solid particles, bacteria and chemical fog that
● Misting power: 32W
pollutes the air around us. When the oppositely charged ions meet, their structure ● 19 hours misting
will be changed and will lower its activity, which can make the air particles in the air
drop on the ground.
Photo-catalyst function: This function decomposes noxious gas and inorganic compounds in the air,
inhibiting the multiplication of bacteria and virus, which cleans and refreshes the air.
Read the instructions carefully before attempting to operate the product and keep this
manual for future reference.
● Do not pull the plug with wet hands to avoid electrical shock.
● Do not use damaged, excessively bent, stretched and intertwined electrical cord. If the electric cable is damaged,
it must be replaced by qualified person in order to avoid a danger. Do not replace the electrical cord by yourself
● Do not put any foreign body in the inlet or outlet. This will cause danger or lower the power of the wind.
● Avoid dripping water and excessive heat (high temperature). Avoid any inflammable or explosive objects from
● Fill the tank with water, then install the water tank into the assemble entrance. Ensure that the
water tank has been fastened at the back cover properly. (Please refer to picture 1).
● Put the machine on stable ground, insert the plug into the socket, press on/speed key to start the
fan. (Please refer to picture 2).
Picture 1 Picture 2
Power on:After the plug has been inserted into the socket, a buzzer will produce a BB-electronic
sound, all drawing patterns will be displayed on the screen and the machine will now be on idle
mode.
● ON/SPEED:Press the on/speed button, the FND screen will display wind speed at 1, and the fan
function icon will light up on the screen. Continue to press this ON/SPEED button, the wind
speed will change to middle power and display at 2, press the button for the third time, the
wind speed will change to strong power and display at 3. The wind speed will change according
to 1-2-3 sequence every time the operation/wind power key is pressed.
● MIST:Press the MIST button to turn on the mist function, the misting icon will light up on the
FND screen. Press the button one more time and the mist function will be turned off.
● ION:Press the ION button to start this function, the Ion function icon will light up on the FND
screen. Press the button one more time, the Ion function will be turned off.
● Rotate:When the fan function is on, press the Rotate button, the rotation icon on the FND
screen will light up and the grills will immediately start rotating. Press the button one more time,
the light on the icon will turn off and the rotation will stop. Please note that when the fan
function isn’t on, the rotation function cannot be used.
● TIMER:When the fan or the mist function is on, press the Timer button. The H icon and the
timer icon on FND screen will light up and the timer icon display will state “1 hour”, press the
timer button and there will be an additional hour to the timer setting everytime “1 hour→2
hours→3 hours→„„→9hours→timier off”. After the set hours, the fan and mist function will
The functional buttons on the remote control work the same way as the buttons on the operating
panel.
●The workable distance of this remote control from the main unit is 5 meters, and workable center
angel is 45 degrees.
●If the remote control is already near to the machine but still does not work , replace the battery.
●Please do not let the children play with the remote control.
2. Pull the misting lead hose off of the misting box, then take the misting box out. Put 2~3 drops
of detergent (accessory) on the misting piece, clean the misting piece after 1 minute with the
brush (accessory), wash the detergent off and dry the misting piece using a soft dry cloth.
Wipe the dust and stain on the machine with soft wet cloth. In case of stains, you are suggested to
clean with a neutral detergent, especially the besmirch on wind direction adjusting sheet.
Please do not use any corrosive cleansing liquid such as gas or alcohol to clean the plastic part of
the machine.
Put the machine back into the box and keep it in a dry place with good air circulation.