You are on page 1of 2

Grading Checklist - PSP 0

Student Eridtk Sebastian Puentes Arias Program PSP-1


Instructor Nestor Montaño
Grading Data Entry
Date
Legend Start
 - O.K. End
X - resubmit Interrupt
Total

Assignment Package Comments


Ok PSP0 Project Planning Summary
Ok Time Recording Log
Or Defect Recording Log
pre
nd
e
Ok
Ok Source Program Listing
Ok Test Results

Program and Test Results Comments


Ok The program appears to be workable.
Ok All required tests have been run.
Ok The actual output is correct for each test.

Time Log Comments


Ok Time data are entered for all process steps.
Ok Process steps are sequenced appropriately.
Ok Time data are entered against the appropriate process
step.
Ok Interrupt time is tracked appropriately.
Ok Time data are complete and reasonable.
Ok Times were recorded as the work was done.

Defect Log Comments


Ok Every defect has all required data.
Ok Defects were injected before removed.
Ok Every defect has a fix time.
Ok Defects injected in compile and test have fix numbers.
Ok Defects are adequately described.
Ok Defect types are consistent with description.
Ok Defect types are consistent with phase injected.
Ok Defect types are assigned consistently.

Planning Summary Comments


Ok Planned total time has been entered correctly.

PSP0 GC June 2013 1 © 2006 by Carnegie Mellon University


Grading Checklist - PSP 0

Consistency Checks Comments


Ok Defects removed are consistent with compile and test
phase time and program size.
Ok Total compile defect fix times are less than compile
time.
Ok Total test defect fix times are less than test time.
Ok Defect dates & phases are consistent with the time log.
Ok Planning summary is consistent with the time log.
Ok Planning summary is consistent with the defect log.

General Comments
Ok Followed the defined process.
Ok Complete, consistent and accurate process data
collected.
Ok The student did his or her own work.

PSP0 GC June 2013 2 © 2006 by Carnegie Mellon University

You might also like