Professional Documents
Culture Documents
NOTE: While written for SAP2000, this article also applies to CSiBridge.
Data Exchange Format (DXF) files may be imported from AutoCAD 2012 into SAP2000 using the procedure which follows:
1. Create and save a DXF model within AutoCAD. The example model we will use for this demonstration is shown in Figure 1:
3.
3. Within SAP2000, select File > Import > AutoCAD .dxf File, as shown in Figure 2:
NOTE: AutoCAD does not need to be installed on the desktop to import and export between SAP2000 and DXF. This is because DXF files are in
text format, which is published and available to the public.
4. Verify that DXF Files (*.DXF) is selected from the scroll-down menu, then locate and double-click the DXF file for import into SAP2000, as shown
in Figure 3:
5.
5. Select the Global Up Direction and the Units, then select OK, as shown in Figure 4:
7.
7. Select OK, then the DXF file will import as a SAP2000 model, as shown in Figure 6:
See Also
Sample DXF files for import article – sample shell and solid models in DXF format