Professional Documents
Culture Documents
I agree...sort of.
Today, we've got tools that yesteryear's mixers could have never dreamed of. Spectrum
analyzers are one of them. By plotting a track's frequencies on a graph, they allow you
to "see" the sounds that your mixes are comprised of.
Don't get me wrong—what matters most is always what comes out of the
speakers. With that being said, the visual feedback that a spectrum analyzer
provides can help you make better mixing decisions.
Curious how an analyzer can supercharge your mixes? Here are a few ways to get
started…
1. Foolproof High-Passing
Sometimes, it can be tricky to figure out where to high-pass tracks. Set the cutoff
frequency too low, and you risk leaving in rumble. Set it too high, and you'll rob your
track of its fullness and body.
First, add it to your track as an insert. Then find a section of the song where the track
plays its lowest note or chord. Press play and look for the lowest "bump" on the
analyzer's display. This bump represents the track's fundamental frequency. You can
safely roll off anything below it without affecting the thickness or body of the
track.
Using a spectrum analyzer to set a track’s high-pass filter
When two tracks occupy a similar area of the frequency spectrum, they often compete
with each other. This can lead to a muddy, undefined mix.
Sometimes, it's easy to find and fix these problems with your ears alone. Other times,
some visual assistance can be helpful.
You can use a spectrum analyzer to compare the frequency makeup of two different
tracks. (To pull this off, you'll need an analyzer with a sidechain input.) This technique
makes it easy to identify exactly where your tracks are competing. You'll then
know exactly how to EQ them to fit together.
Using an analyzer’s sidechain input to compare the frequency makeup of two different
tracks
3. Identify Resonances
Some resonances are easy to spot on a spectrum analyzer. In the upper midrange,
they'll often show up as sharp, narrow peaks. In the lower midrange, they're often
broader bumps. With the help of an analyzer, you can quickly and easily identify where
they are (so you can address them with EQ).
A potential problem frequency appearing as a peak on a spectrum analyzer
Not all resonances will show up on an analyzer's display, so it's worth pairing this
technique with a quick sweep up the spectrum to catch anything you may have missed.
Once you know the unique frequency curve of your room, you can mentally
compensate for it during the mixing process. This will make it easier to craft
mixes that sound great on a variety of different playback systems.