Professional Documents
Culture Documents
Boomer L1 C-DH
Equipped with COP 1638, COP 1838 or COP 2238 rock drill
Coverage area up to 69 m2
www.atlascopco.com
BOOMER
L1C
Standard features
»»Rock drill »»Carrier
• COP 1638, COP 1838 or COP 2238 rock drill with dual- • Sturdy, articulated carrier with four-wheel drive
damping system for optimal drill consumable life • Powered by a 6-cylinder, EPA III/COM III (Tier 3/Stage IIIA)
• Pressurized housing and mating surfaces to reduce internal approved diesel engine
contamination of the rock drill • Four jacks for stable set-up
Specifications
ROCK DRILL »»Hydraulic system
COP 1638 COP 1838 COP 2238
• Hydraulic pumps: two pump packs, first consisting of two var-
iable pumps for percussion and positioning, second consisting
Shank adapter R32/R38/T38 R32/R38/T38 R32/R38/T38 of two constant flow pumps for rotation and compressor.
Height over drill centre 88 mm 88 mm 88 mm • Pumps unloaded at start
Length without shank 1 008 mm 1 008 mm 1 008 mm • System pressure, max.............................................150–240 bar
Impact power 16 kW 18 kW 22 kW • Hydraulic oil tank, volume max/min......................... 310/240 l
Impact rate 60 Hz 60 Hz 73 Hz • Low oil level indicator
Hydraulic pressure 200 bar 230 bar 250 bar • Oil temperature gauge on oil tank
Rotation system Separate rotation Separate rotation Separate rotation • Electrical oil filling pump
Rotation speed 0–340 rpm 0–340 rpm 0–340 rpm • Oil filter indicator
Rotation torque 440–1 000 Nm 640–1 000 Nm 640–1 000 Nm • Air fan cooled hydraulic oil
Lub. air consump. at 2 bar 5–7 l/s 5 l/s 5 l/s • Filtration.......................................................................... 16 µm
Water consumption 35–120 l/m 40–120 l/m 50–120 l/m • Mineral hydraulic oil
Weight 170 kg 170 kg 170 kg
»» Carrier
FEED • Deutz 6-cylinder, TCD 2013 L06, EPA III/COM III (Tier 3/
BMH 6800 BMH 6812 BMH 6814 BMH 6816 BMH 6818 Stage IIIA) approved 6-stroke prechamber diesel engine
• Power rating at 2 300 rpm............................. 173 kW (232 hp)
• Torque at 1 500 rpm...................................................1100 Nm
Total length 5 287 mm 5 882 mm 6 502 mm 7 102 mm • Articulated steering................................... ±41° steering angle
Drill steel length 3 700 mm 4 310 mm 4 920 mm 5 530 mm • Four-wheel drive
Hole depth 3 443 mm 4 043 mm 4 668 mm 5 268 mm • Hydrostatic power steering system
Weight, incl. drill 601 kg 631 kg 665 kg 696 kg • Hydrodynamic transmission..................................Clark 24000
Feed force 20.0 kN 22.0 kN 22.0 kN 22.0 kN
• Front axle............................................................. Dana 123/90
• Rear axle ....................................Dana 123/90, ±8° oscillation
• Automatic differential lock on front axle, limited slip
• Tyres........................................................................12.00xR24
»»Boom • Clearance outside axles............................... 11º rear, 22º front
• Boom........................................................................ BUT 35M • Hydraulic jacks, front . ........................................ 2 extendable
• Feed extension.......................................................... 1 800 mm • Hydraulic jacks, rear...............................................................2
• Boom extension........................................................ 1 600 mm • Service brakes..............................................2 separate circuits
• Parallel holding..........................................................complete • Emergency and parking brakes......................................SAHR
• Feed roll-over.................................................................... 360° • Fuel tank, volume............................................................. 400 l
• Max. lifting angle...................................................... +70º/-45° • Exhaust catalyser
• Max. swinging angle.........................................................±45° • Silencer
• Weight, boom only......................................................2 860 kg • Electric system..................................................................24 V
• Batteries.............................................................2x12V, 125 Ah
• Tramming lights....................6x40 W LED, 2x70 W, 24 V DC
• Working lights......................................4x35 W HID, 24 V DC
»»Air system • Brake lights
• Illuminated stairs...............................................................LED
• Hydraulically driven screw compressor.. Atlas Copco GAR 30 • Fire extinguisher
• Capacity at 4000rpm..........................................49 l/s at 10 bar • Central lubrication system
• Adjustable speed • Spirit level....................one for longitudinal, one for sideways
• Air pressure gauge • Gradeability at max. load on drive wheels.......................... 1:4
• Hole blowing kit with 80 l air receiver • Horn, beacon and reverse alarm
• Shelf for drill bits and tools
»»Water system
• Internal air-water mist flushing system
• Internal water tank capacity...........................................2x450 l
• Hydraulically driven water booster pump................. CAT 1010
• Adjustable water flow rate to suit conditions
»»Control system
• Rig Control System (RCS) – versatile and upgradeable to a
higher degree of automation
• One adjustable, electronic control panel with colour display
• USB-port for transfer of data and backup settings
• Integrated diagnostic system
Boomer L1 C-DH with COP 1638, COP 1838 or COP 2238
SR35-R39-T38 45
Couplings
R32-R39-T38 45
Thread Diameter Length
SR35-R39-T38 Speedrod 45
mm R38 55 170
T38 55 190
Extension rods for injection drilling/RAS
Dimension Min. hole diameter
mm Rnd 32 Speedrod 51
Rnd 38 Speedrod 64
Optional equipment
»»Protective roof
• Mounting height -140 mm/+80 mm/+310 mm
• Manual spotlight, left and/or right
• Swingable seat for drilling and tramming
»»Cabin
• FOPS-approved cabin, height 3 044 mm including:
-- Air conditioning unit
-- Fixed seat
-- CD-changer
-- Boot washing kit
• Cabin body made of stainless steel
• Front window, 24 mm
• Heating function for air conditioning (water transferred)
• Electrical heater, 1.2 kW, 230 V (CE)
• Joystick-controlled spotlights left and/or right
Boomer L1 C-DH with COP 1638, COP 1838 or COP 2238
Measurements
side view
5 287
www.atlascopco.com
brochure may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
BOOMER
© Copyright 2010, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos in this
2 530
3 044
2 040
L1C
11°
22°
261
215
Sound power level (ISO 3744), drilling, free field 128 dB(A) re 1pW
400
DIMENSIONS
mm Width 2 245
WEIGHT
gross weight, depending on configuration