Professional Documents
Culture Documents
FINAL EXAMINATION
End of quiz
You are at the end; press Finished to complete and grade the quiz.
You can review your answers below and click Edit if you want to change any.
Finished
Question 1
_____ separations are based on size and/or density differences of different components in a mixture.
Response: mechanical
Question 2
_____ theory states that energy used in crack propagation is proportional to the new crack length produced.
Response: griffith
Question 3
NEOPRENE is a colorless to light yellow viscoelastic material.
Response: False
Question 4
_____ crusher -Ideal for reducing hard materials on a continuous service even in the most severe crushing
application.
Response: jaw
Question 5
_____ A plastic manufacturing process that produces long plastic parts with uniform cross sections.
Response: extrusion
Question 6
Selection of materials begins the manufacturing processes.
Response: False
Question 7
_____ Separation of a liquid from large dense insoluble solids by pouring of the liquid.
Response: decantation
Question 8
Plastic is reliable with respect to weathering
Response: False
Question 9
In a continuous process, the products are usually not discrete.
Response: True
Question 10
Heavy Duty roller conveyors are used for moving items that are at least _____ (lb)
Response: 500
Question 11
_____ conveyors are used to raise or lower materials to different levels of a facility during the handling process.
Response: vertical
Question 12
_____ conveyors - This new conveying system is ideal for environments where dust, particulates or product debris
build up and where constant cleaning is not feasible.
Question 13
Strain between two or more solid surfaces as a result of _____ action.
Response: adsorption
Question 14
Solid ground curing systems are the most common rapid prototyping systems.
Response: False
Question 15
Conveyors offer limited opportunities to continuously load and unload items over a long period of time.
Response: True
Question 16
Epoxies are used as adhesives.
Response: True
Question 17
Selection of materials begins the manufacturing processes.
Response: False
Question 18
A manufacturing engineer selects and coordinate specific processes and equipment.
Response: True
Question 19
Rapid prototyping costs about the same, but takes less time than traditional prototyping.
Response: False
Question 20
_____ Process in which solid particles in a liquid or gaseous fluid are removed by the use of a filter medium that
permits the fluid to pass through but retains the solid particles
Response: filtration
Question 21
In thermoforming process, plastic sheets are heated over an open mold to a working temperature. Once workable, a
_____ is applied to the mold, forcing the plastic sheet to take the shape of the mold.
Response: vacuum
Question 22
_____ A mill whose purpose is to shred or crush aggregate material into smaller pieces by the repeated blows of
little hammers.
Question 23
I WILL PASS THE EXAM.
Response: True
Question 24
Majority of product’s cost comes from manufacturing.
Response: True
Question 25
_____ It is the method of separating easily identifiable material from a mixture.
Question 26
Plastics extrusion is a high-volume manufacturing process in which raw plastic is melted and formed into a
continuous profile.
Response: True
Question 27
Roller Conveyors are material handling systems that use powered rollers mounted in frames to convey products
Response: True
Question 28
Conductive materials are used for the coating of circuit boards such as _____, _____ and _____
Response: aluminum
Response: nickel
Response: copper
Question 29
Rubber is a polymer which is majorly classified as natural rubber and synthetic rubber.
Response: True
Question 30
_____ Refers to the physical dimension of an object.
Response: size
Question 31
Chain & roller conveyors are short runs of two or more strands of double pitch chain conveyor built into a chain
driven line roller conveyor
Response: True
Question 32
Uncured rubbers have high viscosity so mechanical working of the rubber can increase its temperature up to 150°C
(300°F).
Response: True
Question 33
_____ CONEYORS are not powered conveyor system and rely on external forces to move the product along the
conveyor
Question 34
Compression gives a definite particle size and sometimes a definite shape, with few or no fines.
Response: False
Question 35
Thermo plastics can be softened by heating and hardened by cooling any number of times without changing the
properties of the material.
Response: True
Question 36
Wafers are pre-cleaned using high purity, low particle chemicals.
Response: True
Question 37
_____ A device for separating wanted elements from unwanted materials or for characterizing the particle size
distribution of a sample.
Response: sieving
Question 38
The roller conveyors can be straight or curved depending on the application and available floor space.
Response: True
Question 39
_____ Type of silo which can be used as a temporary measure when growth or harvest conditions require more
space.
Question 40
_____ CONVEYOR - Material handling systems that use moving magnets beneath stationary plates, tables, etc. to
move magnetic (ferrous) materials usually in the form of machining scrap, etc.
Question 41
_____ is a colloidal dispersion of solid particles of the polymer polyisoprene in water.
Response: colloids
Question 42
Vertical conveyors are either carrier systems or dilute-phase systems
Response: False
Question 43
Polyesters are similar to phenolic but can be produced in lighter colours.
Response: False
Question 44
A vibrating conveyor is a machine with a solid conveying surface which is turned up on the side to form a _____.
Response: trough
Question 45
Conveyors were first made from _____ materials during World War II.
Response: synthetic
Question 46
The product from an intermediate grinder might pass a _____ -MESH screen.
Response: 40
Question 47
The designer and the drafter must have a working knowledge of the various processes that could produce a part in
order to lower cost and reduce production time.
Response: True
Question 48
_____ Refers to the decrement or the process of reducing the size.
Response: reduction
Question 49
Conveyors tolerate careful control of the speed at which materials are moved.
Response: True
Question 50
_____ Size reduction equipment that reduces crushed feed to powder.
Response: grinders