You are on page 1of 1

Our offer includes vehicle module programming ECU ENGINE CONTROLLER KIA RIO 1.

4 Kefico 39100 26CF0, 3910026CF0,


9030930912A7 depending on the ecu type it can be programmed in a variety of ways. it may be possible though that not all
the options are available for a particular ecu type. please don't hesitate to contact us and we'll do our best to find a
convenient solution to address your problem.
 
Before purchasing, please carefully compare the numbers on the sticker of the engine controller,for the proper
functioning of this controller these numbers must match!
 
 CHOOSE VARIANT ECU ENGINE CONTROLLER
 
1.Locked: engine computer removed from the car destined for the recycling with data stored from the previous car
immobilizer. In order to fit the driver to re-install prepare it by logging and re-programming. For this purpose it is necessary
interference with electronics specialist diagnostic equipment.
2.Unlocked: before buying, please contact with us as far as possible to prepare the computer , because, depending on the
make and model of the car and the opportunities are in the type of driver, the computer can be ready for installation by our
electronics in different ways:
a) With fixed pin code (CAR PASS) from the previous car, so that by means of the diagnostic device when connected ecu to
car you need reset the computer, then enter the pin code of the car in which the driver to install the program it with
immobilizer.
b) Clean ecu. Ecu with a clean security pin code (CAR PASS) , after connected ecu to the car must be programmed it by special
diagnostic device by introducing pin code of the car in which this you are installing to program with an immobilizer.
c)Plug & Play - excluded immobilizer, they have removed safety codes from the ecu , after connected ecu to the car , engine
runs , do not require any programming, but does not have the immobilizer function.
d) Plug & Play - By automatically adding the code, after connected computer to your car engine automatically installs security
code
No need for additional programming.
e) Plug & Play - Cloned computer has made through our electronic data from the car in which it will be installed.To prepare
the computer you must send us the damaged driver which will be transferred to secure data to proper functioning computer
(Must be provided faulty driver communication with the car or diagnostic device , without proper communication can not be
cloned Security code).
3.Complete: complete, computer engine with immobilizer and all the elements needed to start the vehicle without need for
additional programming

AIR CLEANER & DUCT HYUNDAI ACCENT 06: -SEP.2006 (2006-) MPI-
DOHC

Item specifics
Condition: Used Conditions & Options: ECU,39111-26BE7
Make: Hyundai Year: 2006
Programming: Item may need to Model:
be programmed by ACCENT
dealer
Inventory ID: 794111 Stock #: 1Z0102
Interchange Part 590-51109 Other Part Number: ECU,39111-26BE7
Number:
Inventory Number: 590-51109 Manufacturer Part Number:
3911126BE5,
3911126BE5,
3911126BE7

You might also like