Q1. Please mention the inlay materials that is fabricated by lost
wax technique? ceramic inlay HOT PRESSED GLASS CERAMICIPS EMPRESS I &II CASTABLE CERAMIC DICOR metal: gold ,base metal alloy
Q2. Please mention the advantages of machined restorations?
1- chair side 2- no need for conventional impression 3- optical impression 4- no temporary restoration 5- no multiple appointment 6-faster
Q3. Please mention the advantages of hot-pressed indirect
restoration? 1-accurate and simple 2-excellent marginal fit 3-Relatively high strength (very thin section about 1 mm) Q4. What are the proper criteria for metallic inlay?
to ensure a path of insertion and removal of inlay in addition to friction fit 2. beveled cavosurface margin to protect the cement line by brushing of metal on the margin 3. internal line angle should be well defined .not sharp, beveled axiopulpal line angle 4. no required of 2mm occlusal clearance 5. open interproximal contact to put cavosurface line in cleansable area and for easy to finish it and to take impression 6. we need to cusp protection as cover of functional cusp if cavity out line is more one third of inter cuspal distance 7. additional retention may be incorporated as pararell pins(pin lays) if retention (wall length, taper cement type ) is poor 8. avoid metal inlay if the opposing is amalgam to prevent galvanic shock 9. if extensive tooth damage,difficult subgingival cavity,abutment teeth the metal inlay is indicated 10.its biocompatible, stable(dimensional and chemical),high strength and surface polish, optimum occlusion, contour,contact 11.need temporary restoration,more cost and appointment, thermal conductivity, lack of adaptation to cement because of cement,less retrntion
Q5. What are the causes for unseated inlay?
1- Debris or temporary cement still in the preperation 2-gingival overgrowth into the preperation 3-overbuilt proximal contour 4- excess material in the fitting surface of inlay 5-distortion the wax pattern or the impression 6-voids on model Good luck for all