Professional Documents
Culture Documents
Re-entrant
Speaker and
Speaker-Strobe
757 Series S2813,
S6606
Patented 7125-1657:
0181
Speakers Strobes
All Integrity speakers include a DC blocking capacitor to allow Edwards clear strobes are UL 1971-listed for use indoors as wall- or
electrical supervision of the audio distribution circuit. Models for ceiling- mounted public-mode notification appliances for the hearing
25 VRMS and 70 VRMS circuits are available. Wattage taps from 2 impaired. Prevailing codes require strobes to be used where ambi-
W to 15 W provide on-site ent noise conditions exceed specified levels, where occupants
Re-entrant
flexibility. use hearing protection, and in areas of public accommodation.
Speaker-Strobe
Consult with your Authority Having Jurisdiction for details.
The suggested sound pres-
5ft (1.5m) Radius
sure level for each signal- As part of the Enhanced Integrity line of products, 757 Series
ing zone used with alert or 104 98
0° strobes exceed UL synchronization requirements (within10
alarm signals is a minimum milli-seconds over a two-hour period) when used with a
of 15 dB above the average synchronization source. Synchronization is important in order to
ambient sound level or 5 dB avoid epileptic sensitivity.
102
above the maximum sound
101 Integrity strobes are fully compatible with Edwards Genesis sig-
level having a duration of at 99 10ft (3.05m) Radius
98 nals.
least 60 seconds, whichever
is greater. This is measured 5 96
Typical Wiring
The strobe must be connected to signal circuits which output a constant (not pulsed) 24 Vdc voltage. Depending on the model, the
speaker must be connected to either 25 or 70 V audio circuits.
es Strobes 15/75 cd (-7A) Series Strobes 30 cd (-3A) Series Strobes 75 cd (-4A) Series Strobes 110 cd (-8A) Series Strobes
Output Horizontal Output Horizontal Output Horizontal Output Horizontal Output
s degrees degrees degrees degrees
-15 0 -15 0 -15 0 -15 0 15
15 15 15 15 30
30 -30 30 -30 30 -30 30 -30
45 -45 45 -45 45 -45 45 -45 45
60 -60 60 -60 60 -60 60 -60 60
75 -75 75 -75 75 -75 75 -75 75
90 -90 90 -90 90 -90 90 -90 90
10 20 30 100 50 cd 50 100 60 40 20 cd 20 40 60 140 100 60 cd 60 100 140 200 100 cd 100 200
utput Vertical Output Vertical Output Vertical Output Vertical Output
-90-75 -90-75 -90-75 -90-75
100 -60 60 -60 140 -60 150 -60
45 -45 -45 -45 -45
-30 -30 40 -30 100 -30 100 -30
50
-15 -15 20 -15 60 -15 -15
50
degrees
degrees
degrees
degrees
degrees
0 cd 0 cd 0 cd 0 cd 0
15 15 20 15 60 15 50 15
30 50 30 30 30 30
40 100 100
45 45 45 45 45 Vertical
60 60 140 60 60
100 90 75 60 90 75 90 75 150 90 75 -90°
UL min Average UL min Average UL min Average UL min Average UL min -90°
90°
Horizontal
Vertical
-90°
-90° 90°
Mounting
Plate
(supplied)
5 1/2"
(140 mm) 5/8"
(16 mm) 5 5/8"
#8 x 7/16" (11 mm) (143 mm)
Surface Box
Slotted/Robertson
Drive Screw (Supplied)
Optional Bi-directional Frame
+ +
Listed Fire Alarm
ontrol Panel (supervised End-of-line
gnal circuit - 20-24V dc) resistor, supplied
S S with control panel
_ _
Mounting Accessories
960A-4SF Flush Box, Indoor
757A-SB Surface Box, Red, Indoor
757A-SBW Surface Box, White, Indoor 1.5 (0.7)
757A-WB Weatherproof Box, Red, Surface
757A-WBW Weatherproof Box, White, Surface
757A-BDF Bi-directional Mounting Frame, Red
4 (1.8)
757A-BDFW Bi-directional Mounting Frame, White