Professional Documents
Culture Documents
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1324; Lost Communication with Meter; 2015 2016 MY
IS200T IS250 IS300 IS350 [06/2014 ]
DESCRIPTION
This DTC is stored when a communication error occurs between the radio receiver assembly and combination meter
assembly.
Combination
meter
After the radio receiver assembly receives a registration information assembly
Lost
signal, which is sent by the combination meter assembly when the Radio
B1324 Communication
engine switch is on (ACC), 1 or more times, the radio receiver receiver
with Meter
assembly cannot receive the signal for 30 seconds or more assembly
Harness or
connector
WIRING DIAGRAM
PROCEDURE
1. CHECK DTC (METER / GAUGE SYSTEM)
(a) Check for DTCs and check that no DTCs are output.
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 1/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1324; Lost Communication with Meter; 2015 2016 MY IS200T IS250 IS300 IS350 [06/2014 ]
Click here
Body Electrical > Combination Meter > Trouble Codes
RESULT PROCEED TO
DTCs are not output. A
DTCs are output. B
B GO TO METER / GAUGE SYSTEM
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY COMBINATION METER
2.
ASSEMBLY)
(a) Disconnect the K135 radio receiver assembly connector.
(b) Disconnect the K4 combination meter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
3. REPLACE COMBINATION METER ASSEMBLY
(a) Replace the combination meter assembly.
Click here
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 2/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1324; Lost Communication with Meter; 2015 2016 MY IS200T IS250 IS300 IS350 [06/2014 ]
(b) Clear the DTCs.
Click here
Body Electrical > Navigation System > Clear DTCs
(c) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK END
NG REPLACE RADIO RECEIVER ASSEMBLY
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 3/3